I'm getting the following error when I exit gvim:
** (gvim:9979): WARNING **: Unable to register window with path '/com/canonical
menu/420001E': Timeout was reached
I'm running Ubuntu 11.04 Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011
I updated my machine from 9.10 to 10.04 and gwibber hasnt worked at all.
When i try to run it i get this the error message:
Code:
[21:02:20][arcath@Highgate ~]$ gwibber
** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags'
** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags'
** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags'
Traceback (most recent call last):
code....
This is my slackware 13.1 new installation `.xsession-errors'.
Code:
<stdin>:1:3: error: invalid preprocessing directive #Those
<stdin>:2:3: error: invalid preprocessing directive #or
<stdin>:3:3: error: invalid preprocessing directive #Xft
[code].....
(polkit-gnome-authentication-agent-1:1742): GLib-GObject-WARNING **: cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:1742): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
I have a minor problem with gvim. My gvim never maximizes. Whenever I try to maxmize it automatically shrinks from right side and bottom. Don't know if anyone else faces this problem, but I have faced this even after re-installing the system It is not a show stopper but surely an irritant.
I am using openSUSE 11.2, KDE 4.3.5.
exportfs outputs the following error upon restart or after editing /etc/exports.
Code:
'exportfs: Warning: /exports does not support NFS export.'
here is my info and configs.
[code]....
I installed Ubuntu a couple of months ago using the Wubi installer.Today, I went to restart my PC, but soon after hitting 'Restart' the computer became unresponsive. I couldn't get any keyboard/mouse input to register on screen, so I did a force shut down by holding down the power button. When I turned the computer back on, I selected Ubuntu from the boot menu. The computer printed some messages that passed by relatively quickly so I'm not sure exactly what they said, but it was something along the lines of "NTFS3: wubibuilder failed to load", and then it went straight back to the boot menu. Tried again and again with no success, so I loaded my Windows 7 install to investigate from there. I found a link to Explore2fs on these forums, so I loaded it up, but it apparently can't locate my Ubuntu partition, or at least I don't see my files. I ran the Wubi installer again to see what it would say, and it tells me that a previous installation was detected, and gives me the option to uninstall. Does anyone have an idea of what went wrong,
View 5 Replies View RelatedWhen I use cvs command-line to checkout repository on a CentOS Linux, it works good but when I start 'tkcvs' a blank warning window appears and I can't do anything.
View 3 Replies View Relatedp { margin-bottom: 0.08in; } I don't know how to give the path and file name for the 'dd' command in a terminal window.I'm trying copy a file (smb.bin) on my cd file (in the install directory) to a floppy disk.
The command format is:dd if=in-file of=out-file
in dos it would be dd if=D:/install/sbm.bin of=A:/sbm.bin
You can see I'm a nubee if I can't even give a path and file name in linux!
what these information mean?What should I do to fix this?
(npviewer.bin:6947): Gdk-WARNING **: XID collision, trouble ahead
Shutting down nautilus-open-terminal extension
--- Hash table keys for warning below:
[code]....
i'm not sure for using the correct channel here but i hope someone out there can answer my little questions. 1st in older version i was able to change the settings of the terminal look as the font color, background color and so on. I was also able to define a default window size of a new terminal window. But since after upgrading to to the first release this year and a complete new installation of the current release Maverick i do not find this option anymore. Is there a way how to set up the terminal default window size?
View 9 Replies View RelatedSo this has happened to me several times with fedora 12, and granted I havn't rebooted in a while but it seems that after I update and reboot, I cannot log into GDM any longer.I can login to the CLI, so and I checked all my logs to make sure it wasn't an authentication error.What does happen though, is when I try and login to KDE the screen flickers likes loading the desktop and then spits me back out to the login prompt.var/log/messages reports successful login.Here is what i did find
** (process:2220): DEBUG: Greeter session pid=2220 display=:0.0 xauthority=/var/run/gdm/auth-for-gdm-H2QyqS/database
Failed to play sound: File or data not found
[code].....
uninstall landscape on my Ubuntu 9.04 headless NAS because I do not use it. Running an uninstall simulation: "sudo aptitude -s remove landscape-client" produces: The following packages will be REMOVED:
acl{u} hal{u} hal-info{u} landscape-client landscape-common{u} libffi5{u} libhal-storage1{u} libhal1{u} libpolkit-dbus2{u} libpolkit-grant2{u} libsmbios2{u} pm-utils{u} policykit{u} powermgmt-base{u} python-dbus{u} python-gobject{u} python-pexpect{u} python-pycurl{u} python-smartpm{u} python-twisted-bin{u} python-twisted-core{u} python-twisted-web{u} python-zopeinterface{u} smartdimmer{u}
0 packages upgraded, 0 newly installed, 24 to remove and 3 not upgraded. To me it seems that it want to uninstall support for acl among other things. But I don't want to remove support for acl as I use it on my files. And also should "hal" be removed?
I'm want to reach others who have paid for Canonical support services.I'd like this thread to collect various impressions -- PRO and CON -- along with suggestions for using paid support.Please consider a linux admin with under-10 ubuntu boxes to support, who do they turn to for help?How does your need for help mesh with the contracted services as written?How does your need for help mesh with the contracted services in practice?Please avoid flame and vitriol about paying for support.Please avoid flame or vitriol about Canonical in general.
Some people need a mother-ship to contact when the going gets rough.Many times I've been unable to create the right question(s) to get online answers without spending (wasting) time getting nothing from searches and postings. Anything in a niche makes the situation that much worse. Other times the answers involved hand code patches and build something, etc -- skills I have but that are rusty enough to mean long hours to deploy.When does paid support make sense?
What skills are needed to find online answers 80% of the time?If this post steps on forum rules, I apologize in advance and expect the moderators to spank me accordingly. If this post is okay, as is, I expect the moderators to slap others who otherwise disrupt the dialog.
I found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
I've been using an NVIDIA driver from NVIDIA's site (190.53) for a while. Now I want to upgrade to Lucid.
1) Is it recommended to uninstall this driver prior to upgrading to Lucid?
2) If yes, how do I go about this? Please be specific, since I don't want to presume anything and make a mistake.
After reading this announcement, I don't understand if Xubuntu 10.04, or others ubuntu 10.04 variants, will be also LTS. What I understand is that :
- Ubuntu 10.04 (Gnome) Desktop Edition is a LTS.
- Ubuntu 10.04 Server Edition is a LTS
- Ubuntu 10.04 Netbook Edition is NOT a LTS
- Kubuntu 10.04 seems to be a LTS
- Xubuntu 10.04
- Mythbuntu 10.04
- Ubuntu Studio 10.04
Obviously, I can't understand how some variant could be LTS and not some others : they are all using the same repositories. So, Canonical would maintain updates for only selected packages ?Does anyone knows more about that LTS attribution ?
Some time ago I installed SDL in Ubuntu 10.04 using Synaptic Package Manager. Now, there are upgrades available for the following packages:
libsdl1.2-dev
libsdl1.2debian
libsdl1.2debian-pulseaudio
Trying to upgrade them seemed to reveal contradictory dependencies. If I select "mark for upgrade" on libsdl1.2-dev or libsdl1.2debian, Synaptic says I have to remove libsdl1.2debian-pulseaudio. But if I select "mark for upgrade" on libsdl1.2debian-pulseaudio, Synaptic tells me that I have to upgrade libsdl1.2-dev and libsdl1.2debian! I'm worried about breaking something, so I haven't upgraded yet. Is there an error in the dependency tree, or am I missing something obvious?
Until Karmic Koala I could enable/disable services at startup (such as ssh or mysql) by issuing a update-rc.d -f someservice remove. On reboot, it would no longer run, and I could re-enable if necessary by, for example, running a update-rc.d someservice default.
However, it seems that now in Lucid Lynx this no longer works. For example, if I do a nmap localhost I can see that the ports for the respective services are open, therefore I assume they are likely running (which an attempted access confirms). For example, if I do a /etc/init.d/ssh stop, the ssh service is respawned. I've found that service ssh stop or initctl stop ssh effectively stops the service (i.e. it is no longer "respawned" if "killed"). But so far I haven't found documentation that conclusively indicates how to disable the service start on (re)boot.
So I ask you, what is now the currently "canonical" or "standard" way to enable/disable these services (particularly ones such as ssh or mysql) from starting on boot on Ubuntu? I'd like to avoid having to remove the respective packages if possible (as some posts suggest), since in some occasions I'm interested in manually running those services -- therefore, having to install/uninstall packages is impractical.
After moving to Lucid, I have no flashplayer. Eventually, I tracked the problem to a missing Cannonical repository. I inserted the line in the sources list: [URL] Now Synaptic reports:
E: Type [URL] is not known on line 45 in source list /etc/apt/sources.list
E: The list of sources could not be read. Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
I have re-checked everything I can think of, and remain baffled!
I have downloaded the jdk-6u20-linux-i586.bin from their website. I also read the instruction given to install jdk manually but i was not able to run a single program. Can someone give a step by step instruction to install jdk and also tell me how to set the path so i can easily execute the programs.
View 9 Replies View RelatedI am Just trying to set the Environmental variable using a script file and my code is as follows:
#!/bin/bash
echo $PATH
PATH=${PATH}:/opt/bin
export PATH
echo Environmental Variable path is Set
echo $PATH
When I am running the above script, from the last line "echo $PATH" I am getting that /opt/bin has been appended to the PATH but again when I am typing echo $PATH in the terminal I am not getting the newly appended path.
i am new to linux . i have the basic knowledge of networking. a week ago i installed debian Lenny version on an old pentium 3.in addition i installed a ddclient configured it according to many tutorials....i searched google a few days but didnt find my case.i ran the folowing command :
ddclient -daemon=0 -debug -verbose -noquiet
output:
debian:~# ddclient -daemon=0 -debug -verbose -noquiet
[code]...
I assume that uninstalling / disabling the new package canonical-census will have no adverse effects? It is not something that I would choose to install if it was on offer, so I don't intend accepting it by stealth.
[Code]....
i got problem which slows my boot to linux. Before loading Ubuntu logo in console i see fast flash with words: "Warning: unable to find a suitable fs in /proc/mount, is it mounted? Use --subdomainfs to override." What should i do? To fix that warning?
View 3 Replies View Relatedafter logging into my ubuntu 10.10 netbook edition, I see that my gnome desktop just hangs on the background desktop screen. when i check my .xsessions i see the following errors listed below.how to fix these error messages?
gnome-session[1583]: WARNING: Unable to find provider 'mutter' of required component 'windowmanager'
gnome-session[1583]: WARNING: Unable to find provider '''' of required component 'panel'
GNOME_KEYRING_CONTROL=/tmp/keyring-ObEeS8
[code]....
I want to set up a PDC on my computer using Samba without LDAP, etc. The only thing I need is to share folders between the two ridiculous computers here. I got a 11.3 laptop and this 11.4 desktop. This is the /var/log/samba/log.smbd extract:
Code:
[2011/06/11 08:29:35, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/06/11 08:29:35, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/06/11 08:29:35.951937, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.954910, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.955027, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb
This is the /var/log/samba/log.nmbd extract:
Code:
[2011/06/11 08:27:48.682275, 0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Samba name server ANTARES is now a local master browser for workgroup XXXXXXXX.WORLD on subnet
[2011/06/11 08:28:08.700572, 0] nmbd/nmbd_serverlistdb.c:343(write_browse_list)
write_browse_list: Can't open file /var/lib/samba/browse.dat.. Error was Permission denied
I have modified in Yast the User Authentication Source to smbpasswd and specified the correct path to the file...
This is the /etc/samba/smb.conf extract:
Code:
passdb backend = smbpasswd:/XXXXXXXX/smbpasswdfile
I erased all the samba related configuration files, uninstalled samba cli/ser samba-yast cli/ser and reinstalled, reconfigured and still have same issue. It worked very well with 11.1... (I clean installed 11.4 yesterday). I thought take sources from samba, compile and then see if it works...
i have the basic knowledge of networking. a week ago i installed debian Lenny version on an old pentium 3. in addition i installed a ddclient configured it according to many tutorials.i searched google a few days but didnt find my case. i ran the folowing command :
ddclient -daemon=0 -debug -verbose -noquiet
output:
debian:~# ddclient -daemon=0 -debug -verbose -noquiet
=== opt ====
opt{cache} : <undefined>
[Code]...
i installed ddclient before installing apache. the 10.0.0.10 address is the server address in my d link router behind NAT.
Trying to install the Suhosin module with the php 5.2.9 c5-testing repo...it won't run with the php 5.2.9 testing build (there isn't an updated suhosin package against the 5.2.9 build)
PHP Warning: PHP Startup: suhosin: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
What's the best way to handle this from an admin best practices standpoint? I want to do everything possible to keep the suhosin module tracked by yum for future updating etc. Is it best to try to find a suhosin rpm that is built for 5.2.9 and install it with yum localinstall? If not, if I build the module myself, what's the best path to keeping yum/rpm in the loop on this install for future updating via yum?
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies View RelatedI am creating one bash script name as pathsetup.sh.
In that , I am trying to setup a path to my user profile. S my script content is as follows,
pathsetup.sh contains,
#!/bin/bash
MY_PATH=/home/arun/NS3/ns-3.9/build
export PATH=$PATH:$MY_PATH
echo "$PATH"
If I run the script, when run time it shows the MY_PATH added to PATH.
But, when I check it in terminal after run, it doesn't add the PATH.
if I put echo $PATH in terminal, it show old path.
How can I add path permanently to a user.
I read, ~.bash_profile , we can add the path permanently for a user.
But, I want to add MY_PATH for a specific time. I don't want any user change the file .bash_profile each time.
Just running the pathsetup.sh script, MY_PATH should be added to the user PATH.
Instead of .bash_profile, using shell script, can it possible to add path permenetly for a user.