I found out that ubuntu 9.10 Karmic Koala is not published in ubuntu.package.com. Is it possible to get xubuntu 9.10 then. if yes, kindly point me to the site please. Seriously, I have spent weeks trying to get the right source for ARM machine. Only Karmic and older version could be used.
View 4 RepliesIs there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies View RelatedInstalling the closed source java in Xubuntu 10.10.
View 1 Replies View RelatedI have 11.04, and installed xubuntu desktop, but now I can't vnc into this machine, I get connection denied. I was able to before with the default desktop. What do I need to do?
View 3 Replies View RelatedAre there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.
View 9 Replies View RelatedI want to remove PHP-5.3. completely from my machine after make it from source.
how can this be done?
When I try make uninstall I get:
make: * No rule to make target `uninstall'. Stop.
In the past, when I open a gvim session on a remote machine, the title bar of gvim would show the machine name in brackets. I am not sure if this was done by the remote gvim itself, or the local window manager. In the past I have used gnome2, although I am currently using unity (and finding it rather frustrating). Is there some setting I can change to always force remote windows to display the source machine?
View 1 Replies View RelatedI was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
View 1 Replies View Relatedi am already a little bit familiar with linux and now i want to know better the linux OS. i have downloaded the source code of the krnel from the kernel.org and i dont understand the linux source trees organization, so can somebody do me a favor and give me a link to some internet page (or at least a book) that explains that?? i have searched in the internet with the tag:::linux source trees organization and i have not found nothing interesting
View 1 Replies View RelatedI want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies View RelatedWe all know we can install a linux system such as Fedora 10 and use it. Being linux, one should in principle get the source codes for everything that has been precompiled (except the proprietary drivers such as nvidia) in the installation DVDs/CDs. Where are the source codes ? Is there a place I can download them ?
To avoid confusion, I am not referring to the kernel source that can be compiled to give a linux kernel, but that does not include the drivers, such as intel_drv.so.
To be more specific, the intel graphic i810 driver has been built into any linux system, but where is the exact source? One answer may be that primary source intellinuxgraphics.com. However, if anyone tries to download the every changing (i.e., keep updated almost every single day) driver source codes from freedesktop.org, it is almost certain that the source codes will not be the same as the one that is finalized in Fedora 10.
installed the fedora 12, but dont know how to use the source dvd to install the source package.
View 3 Replies View RelatedI try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies View RelatedI read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies View RelatedI have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies View RelatedIt seems whenever i create a folder it creates the folder as untitled folder, but i can't change the folder name it just says "you don't have permission to rename item" but yet i created the folder and it is there. One thing i have noticed is that once i enter a folder it won't even let me move the folder.
View 6 Replies View RelatedI remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
I have several (say, 50) machines running ubuntu.I want them to be centrally controlled.That is, each machine should get permit from central machine before installing any software etc.I googled quite a lot but could not find the solution...
View 1 Replies View RelatedI am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
I have been trying to SCP a couple files from my Ubuntu 10.10 machine to a Fedora 12 machine. Before today, did it with out any problems, always worked. Today however; after the SCP is complete from my machine, the file on the other machine is zero bytes, an empty file. The only thing I can remember getting changed was the new kernel that was in the update I did today. But I don't think that would have changed the SCP works.
View 5 Replies View RelatedI can set-up an ssh tunnel from machine A to Machine B:-
fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com
I can successfully logon to machine A to Machine B.
what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.
Right now I just installed open ssh because i was told its a great thing to have for remote controlling my machine if I am at work on my windows system. My question is, how on earth do I acess my machine from my windows machine now that its installed? i did sudo apt-get ssh and thats about all so far...
View 5 Replies View RelatedIn Ubuntu I can easily transfer packages from offline machine into online machine using APTonCD feature. In fedora ,Is there anything similar by which I can transfer my packages of online machine into the offline machine
View 2 Replies View RelatedHow do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies View RelatedI successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedWhenever I put ssh into remote machine am getting the following messages. Write Failed: Broken Pipe (After logged into that machine ) Read Socket Failed: Connection reset by peer (While trying to log in ) Also known_hosts file is changed frequently.
View 1 Replies View RelatedI have a ubuntu 9.04 machine i'm using as a file server. I'm able to see that machine from any XP machine, connect to it's shares play music, movies, work off of it NO problems. But i can't view the shares from a windows 7 home edition PC (garbage). AND, from the ubuntu PC, i can't see any of the other shares on network. I get "Fail to receive share list from server".
NOTE: Originally i had this machine connected with wireless card because of location. and I was able to see all shares then - both ways (still not from Windows 7 PCs though). However, when I moved to hard wire connection, the network disappeared. I've tried changing IP addresses, changing switches, but no network. I'd like to keep it hard wire. Can anyone point me in right direction or am i missing information?
I have a really weird one. This may be a putty issue, or it may be a config issue in Ubuntu. I've no idea who to blame. I have four machines involved in my little issue that has me scratching my head on where to even BEGIN to diagnose what is going on. The computer I'm attempting to connect to (For identification purposes, I'll call it the main machine) is running a relatively new install of KUbuntu 10.04, stock install of openssh daemon. ufw is disabled, firewalls are off, etc, and I can prove that later.
The machine acting odd is a Win XP 32 bit running Putty. Haven't had a problem until this reload of the previously mentioned machine. A Work machine that is running RedHad of some flavour. A Virtual Machine running a headless setup of Ubunto 8.04. Now that the introductions are over, here is a quick map of the machines that can successfully connect with. My major problem is that I cannot get SSH (And ONLY SSH) to work between the XP machine and the main machine.
Work -> Main = Works
Work -> VM = Works
XP -> VM = Works
XP -> Main = Fails
XP -> VM -> Main = Works
Main -> Main = Works (IE: "ssh localhost")
VM -> Main = Works
When I try to get the XP machine to connect to the Main machine, I get an error with Putty saying:
"Server sent disconnect message
type 2(protocol error):
baad service request ssh-connection"
I've changed Putty to try using SSH Protocol 1 only, but it says the protocol isn't installed on the Main machine, which is true. I've tried setting just 1, and it gives me the error, and I've tried setting it to "2 only" and it again comes up with the error. I went into /var/log as root on the Main machine, and did a "tail -n0 -f *" and then tried to connect, but nothing relevant shows up.
As for the proof that the firewall is disabled, three of the machines are working with Synergy, I am able to swap between all three of the machines without a problem, I can get to WebAdmin from the XP machine to the Main machine, and I can open a Samba share from the XP machine to the Main machine without a problem. This sounds like a protocol issue, but I can't see anything in WebAdmin that'll put me in the right direction.