I have several (say, 50) machines running ubuntu.I want them to be centrally controlled.That is, each machine should get permit from central machine before installing any software etc.I googled quite a lot but could not find the solution...
View 1 RepliesNow I am using Fedora 7 and Fedora 11 on my all network machine. I want to take the backup of all my Linux machine on a central linux machine.
View 9 Replies View RelatedI've installed VirtualBox OSE and have a couple of guest OS setup. I am running Ubuntu 11.04 and VBOSE version 4.x (the most current). Now this installs the guest OS virtual harddrives to a folder in my home directory. How do I get other users on the same host machine access to those virtual machines within VB? Currently logging in as another user and going to Applications/Accessories/VirtualBox OSE ... the list of guest machines is empty save of course on my login.
View 3 Replies View RelatedI have OpenSuse 11.3 with VirtualBox on it, and with installed Oracle DB (on host OS).. but, sometimes this computer is disconnected, without it's gateway (adsl router)... and in that case, I cannot ping from virtual OS to host OS, or another virtual OS. I tried to use 'Host only' option within VirtualBox, but it doesn't work. What should I do? It seems that virtual machines requires some kind of gateway/router, but since machine is disconnected, it's not working.. how could I fix it?
View 4 Replies View RelatedI'm running kernel release 2.6.26-2-686 on a i686 and are trying to share files between my machine and some Windows 95/98 machines. When I enter smb://ip_number/share_name in Nautilus, it works. I can browse the files. When I try the same with smbclient or smbmount, it complains.
smbclient -I=ip_number -L=//server/share gives cli_rpc_pipe_open: cli_nt_create failed on pipe srvsvc to machine tf_calibration. Error was ERRSRV - ERRerror (Non-specific error code.)
I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. I'm assuming I need to be able to connect to my next-server but maybe I'm wrong.
View 1 Replies View RelatedI am trying to share folders between my laptop and desktop. The desktop runs Ubuntu 10 ,and the laptop I'm dual-booting between pclinux OS and another OS. I can't see either machine from either machine. The desktop shows a "windows network" when I go to the network location in file manager. When I run PC Linux, I can't even see the desktop which runs Linux as well, and I've tried to configure shares in the PC Linux OS Control Center, but I obviously failed. I installed gshare on the Ubuntu machine, and PC Linux has GUI tools(whew!) to configure NFS, SMB, and Deb-whatever the other one's name is. As a new convert, I've went into properties,permissions, because it's what I'm familiar with. I just wish someone would tell me if I should maybe just go back to the other OS or not, as I've had so many problems every since trying the switch. I really like this system, but it seems as if you need to be some kind of computer programmer or something to be able to do the most basic things (install software,wireless,share files). I'm not a stupid person, and what I lack in knowledge, I compensate for in desire to learn.
View 2 Replies View RelatedI'm wondering if it's possible to control a TTY on a remote machine via SSH. I'm aware of ssh's -t option, but it doesn't seem to do what I want. Basically, I'm thinking in terms of VNC-like operation, where the remote user and local user see the same thing, only instead of a GUI, they both see TTY1 (or 2, or etc). Is that doable, or no?
View 3 Replies View RelatedCan I run/compile programs on my remote server and control it using LAN? How do I do it?
Long Version:
I have a spare computer here. It's rather powerful for my daily needs (Athlon X2 6000) and I want to set it as my HTPC/Server. Don't worry about HTPC, it got Digital Audio output and a Radeon HD3200 with HDMI out, outputs 1080p pretty well under Windows (I'll setup it for Ubuntu when I get everything straight). So, I thought "Well, I think it's going to be overkill to let such machine as a HTPC only. I'll use it as a server too!". So far so good, but I don't know anything about servers or such. I would like it, as a server, to compile huge programs and handle big compressions (I'm actually with a Celeron ULV 1.2GHz netbook for such tasks, takes ages). Also, it would be pretty nice if I could control the server with my netbook. Like, Start/Stop music/movies with my netbook, control the Boxee/XBMC (Media Players) with the netbook, and, if possible, control its mouse.
Btw, will Ubuntu 10.10 support Hardware Acceleration for ATI Radeon HD3200? Over Windows' DXVA it works OK.
how to regain some type of display. I was trying to get a printer online. The printer was recognized but would not print. I went away from the machine for a few hours and when I came back I had a blank screen. I turned the machine off but nothing comes back up. All key strokes fail to give me anything.
View 6 Replies View RelatedI try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies View RelatedI read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies View RelatedI have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies View RelatedIt seems whenever i create a folder it creates the folder as untitled folder, but i can't change the folder name it just says "you don't have permission to rename item" but yet i created the folder and it is there. One thing i have noticed is that once i enter a folder it won't even let me move the folder.
View 6 Replies View RelatedI remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
I have been trying to SCP a couple files from my Ubuntu 10.10 machine to a Fedora 12 machine. Before today, did it with out any problems, always worked. Today however; after the SCP is complete from my machine, the file on the other machine is zero bytes, an empty file. The only thing I can remember getting changed was the new kernel that was in the update I did today. But I don't think that would have changed the SCP works.
View 5 Replies View RelatedI can set-up an ssh tunnel from machine A to Machine B:-
fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com
I can successfully logon to machine A to Machine B.
what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.
Right now I just installed open ssh because i was told its a great thing to have for remote controlling my machine if I am at work on my windows system. My question is, how on earth do I acess my machine from my windows machine now that its installed? i did sudo apt-get ssh and thats about all so far...
View 5 Replies View RelatedIn Ubuntu I can easily transfer packages from offline machine into online machine using APTonCD feature. In fedora ,Is there anything similar by which I can transfer my packages of online machine into the offline machine
View 2 Replies View RelatedHow do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies View RelatedI successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedWhenever I put ssh into remote machine am getting the following messages. Write Failed: Broken Pipe (After logged into that machine ) Read Socket Failed: Connection reset by peer (While trying to log in ) Also known_hosts file is changed frequently.
View 1 Replies View RelatedBasically I'm working as part time administrator in a company, and still am at college. To keep the story short, the company I work with used to have a linux gateway, namely Untangle. We tried to upgrade to E-Box, which is supposed to have more options than Untangle, but it doesn't seem to work as it should. What I'm trying to ask here is this. I need a gateway system that handles QoS, Content filtering, Mail Filtering, DNS, Wan failover / load balancing, LOGS (important), Firewall and maybe the handling of separate users or groups. The ideal solution would be one that like the E-box, has a central control system, without the need to adjust code in CLI for configuration. I have some experience on CentOS and Fedora, so I am able to do some configuration, like installing Samba, DHCP and VNC.
View 2 Replies View RelatedI have an issue with the manner in which Network Manager is configuring the network and short of ditching Network Manager I can see no solution.The issue : Getting a machine to update its machine name in the DNS serverSounds simple doesn't it I operate a FreeBSD based firewall / DHCP / DNS server, using a default Network Manager DHCP configuration the Fedora clients do not register their names with the DNS server when they obtain an address.
I have traced the communications with Wireshark and the Fedora clients are NOT supplying the PC's hostname as part of the exchange so this is NOT a DNS server configuration issue. If I uncheck the option 'Automatically obtain DNS information from provider' under the DHCP settings the Fedora clients DO register the hostname that is put into the Hostname (optional) databox. They do NOT however store the DNS server IP address or any other records defined by the DNS server.
Is there some hidden settings or is this a bug because it isn't acceptable 'DHCP' behaviour if it isn't possible to automatically set DNS server IP addresses and at the same time register the hostname during the DHCP negotiation. Before it is said I know I can use a fixed DNS IP address but am not prepared to long term, I am also not prepared to define the Fedora clients with a 'static' IP. I am similarly not interested in playing around with scripts or any other such 'frigs' to achieve what should be a standard activity - registering a host with DNS during the DHCP negotiation.
I have some file tools on a mint machine that I would rather not install on my mac laptop. Mainly because of the vastness of apt-get and the low risk of installation failure. Anyway, every so often I have a file that I want to process in place using some remote tool. Both machines can ssh right in to each other so I was figuring there must be some script or tool out there that would allow me to type out something like remote [file] [tool & args] to send my file to the other machine, get it processed, then get it back.
View 4 Replies View RelatedI need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedI want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies View RelatedI had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies View Related