I like to do a lot of my tasks through the command line, and was wondering, is there a way to see all the wireless networks available in the terminal? I tried 'iwlist scan', and it said all the interfaces do not support scanning. Is there anything I can do?
View 2 RepliesFor some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedI have a MSI A6000 laptop (the laptop that won't accept 10.10 because of the nvidia card) so finally I opted to get Ubuntu 9.10. I successfully installed with a dual boot.
There are two problems though that I have ran into.
1. Ubuntu 9.10 is not picking up wireless networks.
2. The Ubuntu graphics (icons, taskbar and windows) are much to large. I am guessing this has to do with the Nvidia card (nvidia GeForce 8200m G).
well traded my desktop for it and its a Dell Inspiron 1721. The Wireless was working fin when it had Windows vista on it but when I installed Ubuntu 9.10 The wireless just seemed to not exist. The LED wouldnt even turn on. So I installed wicd and then the wireless icon began working but it still won't find any wireless networks.
View 4 Replies View RelatedI have an HP Netbook that has Linux MintI have absolutely no issues with awired connection, however my internal wireless will not search and find wireless networ in range. It appears I have one saved (my home network) and I can connect to that, however, if I take my laptop to school or work, it will not find any networks to connect to. On a side note, I have no icon on the taskbar indicating wireless, and I used to have one. I have no idea where it went or what happened. I can answer most questions you may have but im a relatively new linux user (but I have a coworker that "knows all" and could help answer a question that I cannot.
View 2 Replies View RelatedI went out and purchased a Sabrent PCI wireless 802.11n card with the RT2860 chipset because it was on the ubunutu compatibility list and has linux driver available from the manufacturer. I was impressed that the card worked in wireless G mode out of the box, which is a great start....
However, I can't find any wireless N networks. Dual booting I can find/use my N network, but in ubuntu I can only find my G network. This is somewhat frustrating because I bought this card and a new (read: expensive) Linksys E3000 router specifically to run a nice new N network...
I have downloaded, made, and installed (reboot) the latest driver from the manufacturer, but it still won't find any N networks. I found a few posts by searching here and google that alluded to changing this line: "HT_OpMode=1" (from 0 to 1) in the config file RT2860STA.dat located in /etc/Wireless/RT2860STA/ and a reboot. It didn't work for me.
Frankly all this rebooting is starting to **** me off ... I have spent most of last night trying to setup my 180$ wireless network and its still no better than the freebie DDWRT54g based wifi it replaced. I am frustrated, perhaps someone wiser in the ways of ubuntu and wireless N can shed some light on the situation....
I forgot to mention I am on Karmic Kola, amd64 with the standard gnome.
I am using 11.3 (64-bit gnome) and have a new Tenda w322p wireless n card, this works absolutely fine under windows, but I also bought it due to reviews saying it worked with linux. The card appears in network settings as RaLink WLAN controller and uses kernel module rt2800pci, I have also tried typing in the network ssid etc manually but it hangs on exiting network manager (will post what it says later, after writing this) I used drivers from here:Ralink corp., and used the rt3062 one(5th one down?)
for lspci
Code:
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
[Code]....
I have also had the same problem of not picking up networks in Ubuntu, not sure if the drivers are 64-bit compatible or something.
i'm running ubuntu 10.04. i've followed these instructions:[URL]that got the light for the wireless on my laptop to light up but it doesn't seem to be able to find any networks.when i click on "connect to hidden wireless network" and enter the details + encryption code. it spends a few minutes trying to connect before asking for my encryption code again but i know that the code i entered is right.i'm using a belkin router with wpa/wpa2 encryption. but i think it's a problem with the wireless on my laptop rather than a problem with my specific network because under windows on other machines in my house i can see some of my Neighbours networks
View 2 Replies View RelatedI am not able to find the most Wireles icon, I want to connect to other networks, so there will not I print a summarizing what is happening.
View 3 Replies View RelatedI could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
I've read through the stickied thread about troubleshooting my wireless and I've made it to step IV 'Making a connection.'I installed the firmware that my BCM4306 required, then tried 'sudo usr/sbin/iwlist scan'
View 2 Replies View RelatedI have a wireless network at home. My home laptop connects without any issue.I have a wireless network at work. My work laptop connects without any issue.If I take my work laptop home, it can see the network but cannot connect to it. I've checked the passphrase and that's fine, I've deleted the network from the Network Manager profile and re-created it - no luck.
The only thing I can think of is that I had to change the wireless router network channel at one point. I think that the work PC could access the network before that (but it was a while ago). I've tried changing the channel back, but to no avail. I have to keep the channel at its new setting anyway to avoid a loss of signal.What sort of things should I be checking/changing to get home connectivity on my work PC? The wired network is fine, but my wife draws the line at me looming over her desk with a red cable plugged into the back of my laptop.
I just installed Debian Lenny on my new laptop, I uninstall network-manager and install wicd but, it looks that wicd when it scans for networks doesn't find any networks and I don't understand why. I look over my sources.list and it looks ok, then I check the lspci command and my wifi card is detected by the kernel because is an Atheros card, also I install madwifi-tools.
View 3 Replies View RelatedI click the little icon (I think it's called Network Management?) to selct my home wireless network and it's doesn't show ANY wireless networks what so ever
View 9 Replies View RelatedI'm running Debian Squeeze now, just did an upgrade yesterday. I had wl for my wireless and it was all working fine in Lenny. Now that I'm upgraded, wicd can't find anything at all.
[Code]....
i installed network driver using ndiswrapper so the network driver is all installed
packages for ndiswrapper:
ndiswrapper-common version: 1.9
ndiswrapper-utils version: 1.9
ndisgtk version: .8.5
[code]....
then i did
command: sudo ifconfig wlan0 up
contents: SIOCSIFFLAGS: No such file or directory
[code]....
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
i have a printer with a wireless connection and a router with wireless capabilities can i use it some how?
View 3 Replies View Relatedjust downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?
View 4 Replies View RelatedI upgraded to Ubuntu 11.04, and the wireless was working fine until now when it does not recognize anything and says "No wireless networks found".f I plug the cable into my laptop, then it works (that's how I am communicating right now). I am not sure what the problem is, hardware or software.
View 9 Replies View RelatedI'm dual booting BT4 and Ubuntu 9.10. My question is, rather than me having two separate partitions for this, could I just put BT4 in VMware and still be able to detect wireless networks from it? Just out of curiosity, does VMware machines have the capability of detecting wireless networks just like the host OS?
View 4 Replies View RelatedI have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View RelatedI have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
I'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I just installed 10.04 lucid lynx and I don't have any wireless networks.My broadcom card is not being detected.I have tried to go to Administration -> hardware drivers and nothing shows up. It says I have no proprietary drivers.Do I need to connect to the internet before I can download these?It seems circular?Is there a driver that I can download and install the old-fashioned way?I have a macbook pro 4.1, the early 2008 Penryn model.
View 1 Replies View RelatedWell the thing is i cannot connect to a wireless network, when i log in the nm-applet won't show, if i wait about 20 minutes it will show .. and if i clicked on it requires a password, when i enter the password it freezes!! i tried uninstalling the nm-applet and reinstalling it, didnt work
View 5 Replies View RelatedI'm running Ubuntu 10.04 64bit on a Thinkpad T61, and I keep running into some issues with the wireless networks. For a while, the connection works fine (sometimes several hours, sometimes 15 minutes or so--there doesn't appear to be an event associated with it). Eventually, though, the connection disappears; first, though the widgets say I'm connected, nothing will go through, and soon after, it realizes I'm not connected and, moreover, it can't find a single wireless network, despite the fact that it was just fine a couple of minutes beforehand (and other devices still have access to the WLAN, so I know that the router hasn't crapped out). I've tried using wicd, but the same thing happens.
View 2 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View Related