Ubuntu :: No Wireless Networks?
Jul 29, 2011I click the little icon (I think it's called Network Management?) to selct my home wireless network and it's doesn't show ANY wireless networks what so ever
View 9 RepliesI click the little icon (I think it's called Network Management?) to selct my home wireless network and it's doesn't show ANY wireless networks what so ever
View 9 RepliesI could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedI've read through the stickied thread about troubleshooting my wireless and I've made it to step IV 'Making a connection.'I installed the firmware that my BCM4306 required, then tried 'sudo usr/sbin/iwlist scan'
View 2 Replies View RelatedI have a wireless network at home. My home laptop connects without any issue.I have a wireless network at work. My work laptop connects without any issue.If I take my work laptop home, it can see the network but cannot connect to it. I've checked the passphrase and that's fine, I've deleted the network from the Network Manager profile and re-created it - no luck.
The only thing I can think of is that I had to change the wireless router network channel at one point. I think that the work PC could access the network before that (but it was a while ago). I've tried changing the channel back, but to no avail. I have to keep the channel at its new setting anyway to avoid a loss of signal.What sort of things should I be checking/changing to get home connectivity on my work PC? The wired network is fine, but my wife draws the line at me looming over her desk with a red cable plugged into the back of my laptop.
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
i have a printer with a wireless connection and a router with wireless capabilities can i use it some how?
View 3 Replies View Relatedjust downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?
View 4 Replies View RelatedI have a MSI A6000 laptop (the laptop that won't accept 10.10 because of the nvidia card) so finally I opted to get Ubuntu 9.10. I successfully installed with a dual boot.
There are two problems though that I have ran into.
1. Ubuntu 9.10 is not picking up wireless networks.
2. The Ubuntu graphics (icons, taskbar and windows) are much to large. I am guessing this has to do with the Nvidia card (nvidia GeForce 8200m G).
I upgraded to Ubuntu 11.04, and the wireless was working fine until now when it does not recognize anything and says "No wireless networks found".f I plug the cable into my laptop, then it works (that's how I am communicating right now). I am not sure what the problem is, hardware or software.
View 9 Replies View RelatedI'm dual booting BT4 and Ubuntu 9.10. My question is, rather than me having two separate partitions for this, could I just put BT4 in VMware and still be able to detect wireless networks from it? Just out of curiosity, does VMware machines have the capability of detecting wireless networks just like the host OS?
View 4 Replies View RelatedI have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View Relatedwell traded my desktop for it and its a Dell Inspiron 1721. The Wireless was working fin when it had Windows vista on it but when I installed Ubuntu 9.10 The wireless just seemed to not exist. The LED wouldnt even turn on. So I installed wicd and then the wireless icon began working but it still won't find any wireless networks.
View 4 Replies View RelatedI have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
I'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I just installed 10.04 lucid lynx and I don't have any wireless networks.My broadcom card is not being detected.I have tried to go to Administration -> hardware drivers and nothing shows up. It says I have no proprietary drivers.Do I need to connect to the internet before I can download these?It seems circular?Is there a driver that I can download and install the old-fashioned way?I have a macbook pro 4.1, the early 2008 Penryn model.
View 1 Replies View RelatedWell the thing is i cannot connect to a wireless network, when i log in the nm-applet won't show, if i wait about 20 minutes it will show .. and if i clicked on it requires a password, when i enter the password it freezes!! i tried uninstalling the nm-applet and reinstalling it, didnt work
View 5 Replies View RelatedI'm running Ubuntu 10.04 64bit on a Thinkpad T61, and I keep running into some issues with the wireless networks. For a while, the connection works fine (sometimes several hours, sometimes 15 minutes or so--there doesn't appear to be an event associated with it). Eventually, though, the connection disappears; first, though the widgets say I'm connected, nothing will go through, and soon after, it realizes I'm not connected and, moreover, it can't find a single wireless network, despite the fact that it was just fine a couple of minutes beforehand (and other devices still have access to the WLAN, so I know that the router hasn't crapped out). I've tried using wicd, but the same thing happens.
View 2 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View RelatedI have a pretty beat-up laptop, on which the inbuilt wireless doesn't work, and so I now have an ASUS WL-167g, which is acting up!It almost always connects to the required networks without an issue, but then once I'm connected it's REALLY slow on some of them! For example, while I'm at school, it works flawlessly! And at a couple of friends' houses, it works too! however, at home, and at a couple of other places, despite the fact that it connects, its so slow, that google takes like 5 mins to load and searching for anything on google leads it to time out!! This happens whether I'm right next to the router (full signal strength) or 2 floors up (at like 3 bars strength)!
It's getting pretty frustrating to have to swap my lan cable between my desktop and laptop constantly, and also to not be able to use my laptop away from my desk!Does anyone know what might be going on??Also, while i have you guys here! I have another problem -- with the inbuilt card.. Initially, it wouldn't work at all.. but more recently, it has started to function (it connects and works on my home network fine) the only problem is that about 10 mins after I turn the wireless switch on on my laptop, it hangs! (EVERYTIME) (if it's relevant, my laptop is a SONY VAIO VGN-S46GP). Again, any input would be appreciated!!
I installed Lubuntu yesterday on an older Dell laptop and the installation went fine. The only thing not working after the installation was the wireless. After hours of searching, I was finally about to get it to recognize the wireless card, see wireless networks, and connect successfully by running these commands.code...
View 3 Replies View RelatedI have ubuntu 10.10, and at my house I primarily used wired, and it works fine, and under windows earlier today I was able to locate networks, so my wireless card is working. I'm currently at my girlfriends house, and trying to connect to her wireless internet. When I try to connect, I can't find any networks. I've made sure her network has sharing and discovery enabled, however in my wirelss manager it comes up as blank. There's the option to add wireless manually, but do I really need to go through the trouble of finding the routers mac address and all that, it should just show up?I could switch back to windows to see if I can connect, but I'm almost positive it's just the linux wireless manager..
View 4 Replies View RelatedI arrived in the Central African Republic only to find that my wireless (on an HP Mini 5102) wasn't working -- it didn't detect any wireless networks. So I wiped off Windows and installed Ubuntu 10.10, Luckily, it did! (Partly.) At first, I still didn't get any wireless networks. I messed around with all the various things you have to do to get Broadcom wireless drivers working. Finally, following a forum suggestion, I installed Wicd -- and this did the trick. Not knowing any better, I kept Network Manager alongside Wicd, but Wicd is what works much better. (Is there a reason to un-install Network Manager?)
However, when I try to connect wirelessly to the network at this country's one cafe with wifi (which usually works really well, by CAR standards), the network doesn't appear. At the office, when I open Wicd, it includes a box with the message "<connection name>: obtaining IP address", and bit by bit it connects. But when I open Wicd at the cafe, this doesn't happen -- it just gives me a list of random signals from nearby offices (all secured and low-signal), none of which I can connect to. Any ideas how I could get the cafe network to show up?I'm at the office now, and so it's working. However, in order to get it working I had to restart three times -- Wicd only seems to work about half or 33% of the time. Sometimes I get the message: "Connection failed: unable to get IP address" and sometimes I get the message "No wireless networks detected." Then I try again and eventually it works. So far.
I've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies View Relatedis there any way to download the 'package indexes' on a seperate computer operating on windows vista, before transferring them, via usb, to my laptop working on linux 10.10. As the reason i need them is to get the wireless to work so the internet can work.
View 1 Replies View RelatedI have just installed Meerkat on an Acer Aspire laptop, it can see various wireless networks but for some reason can't connect to them. However when I turn my HTC Desire into a hotspot it connects to that fine. Why can it connect to my phone yet not any routers?
View 5 Replies View RelatedI'm having trouble detecting wireless networks in range.
View 1 Replies View RelatedFirst time ever switching from windows. Mainly doing this cause I though it would be fun to learn a new OS and see how it is.From watching a few videos it looked like all I have to do is click on the wifi logo at the top of the screen and I would get my router and a bunch of others (does this on windows) but when I click on it I dont get anything. I think it might be that im running this on a laptop. My wifi card is: Standard Dell Wireless 1501 802.11 g/nIts a new dell inspiron 5000 laptop i customized a little with more ram and a new video card.
Im guessing I will need to provide more info but as I said at the start Im new to this and not sure how or what info I would need to provide. Please just tell me how I can get any data you need and il get right on it. (I used Wubi to install this, went off without a hitch)