Ubuntu :: Error: Line 29137: Bad Flag Alias Index: 0
May 9, 2010
I am getting the following errors continuously whenever I update/save a config file in /etc/
Code:
error: line 29136: bad flag vector alias
error: line 29137: bad flag alias index: 0
The config file got updated though. I am just worried that this may be something bad.I update the files using the command sudo gedit <config_file>. I haven't encountered this before in Karmic. Has anyone encountered the same error messages? This might be a problem with gedit. I tried doing the following and the error messages also came up:
1. In terminal, gedit foo.txt
2. In gedit, type anything and save
3. Terminal will show the following:
Code:
...
...
error: line 19234: bad flag vector alias
[code]....
Running artha from the terminal also causes the error.I've managed to get the top-most line of the error:
error: line 15: bad flag alias index: 0
error: line 15: bad flag vector alias
The hardest thing about this is I have no idea what's causing it. I thought it was gedit but running artha (from the terminal) also causes the error.Sigh. This is a clean install of Lucid, which again makes it even harder to know what causes it.
View 9 Replies
ADVERTISEMENT
Jan 9, 2011
I recently had to move to a new machine, everything went well except for one thing. I did fresh installation of LAMP server all with default configs. Every time I'm using PHP script to that invokes include, require or require_once I get the following error:
Code: Fatal error: Allowed memory size of 20971520 bytes exhausted (tried to allocate 7680 bytes) in /var/www/index.php on line 2 index.php file: PHP Code:
<?php include "index.php";?>
icukapi.php file:
PHP Code:
<?php echo "test";?>
My memory_limit in php.ini is set to 20M. I tried to increase that however it didn't quite work. PHP seems to allocate all possible space and return that message every time i try. If somebody has an idea of how to fix it I would be more than grateful. I spend quite a long time searching for an answer however the all things i found suggested increating memory_limit which in this case doesn't work.
View 1 Replies
View Related
Oct 25, 2010
I have a few alias' in my .bashrc to save some typing, mostly ls type variants.
I wanted to add the following:
- give me a Long listing of ALL in Reverse Time order, (don't recurse directory)
Code:
But it doesn't work anything like the way it does on the command line
When I use the alias I get the following:
Code:
No Time, No Permissions, no group/owner ... , Why?
View 2 Replies
View Related
Aug 3, 2010
I tried to set up an alias for update, upgrade and clean by putting this line into my .bach.rc file
Code:
#alias ud= 'aptitude update && sudo aptitude upgrade && sudo aptitude dist-upgrade && sudo aptitude autoclean' but when I type ud I get this error message, by the way I tried the bash.rc entry both commented and uncommented with the same result.
[Code]..
View 4 Replies
View Related
Mar 27, 2011
After a lot of struggling and tricks, I installed After Effects 7.0. But when it starts up it repeatedly states: "Unknown Anti-Alias Policy" and will not allow me to actually use the program. I can't find anyone else with that error, and it seems very few can actually get AE7.0 installed.
View 4 Replies
View Related
Sep 2, 2010
I get the following message when I try to add or remove programs. This includes when I try to use the Update Manager: Software index is broken. It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first. When I follow this advice, I get the following message:
tom@Compaq:~$ sudo apt-get install -f
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
If anyone can offer suggestions about this problem, Although I've been using Ubuntu for a while, I'm not very confident with the command line (unless I am copy and pasting commands!)
View 9 Replies
View Related
Oct 2, 2010
I keep getting the following error when I run sudo apt-get update:
Quote:
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error:
[URL] release Release: NO_PUBKEY 5D654504F1A41D5E
View 1 Replies
View Related
Mar 19, 2011
Failed to fetch [URL] 404 Not Found Some index files failed to download, they have been ignored, or old ones used instead. I have been getting this for a while now complete with a red triangle with an ! in it on the panel.
View 1 Replies
View Related
Sep 8, 2010
I setup a virtual server with these configurations:
1. Mail server: POSTFIX / DOVECOT
2. Webmin / Virtualmin
I am getting email to desired folders locally but I am not getting email from outside to desired users. Emails are bounced back with message "Address not found in virtual alias table".
Recent log errors are:
Sep 8 04:25:49 server1 postfix/smtpd[28002]: cannot load Certificate Authority data
Sep 8 04:25:49 server1 postfix/smtpd[28002]: warning: TLS library problem: 28002:error:02001002:system library:fopen:No such file or directory:bss_file.c:122:fopen('/etc/pki/postfix/root.crt','r'):
[code].....
View 3 Replies
View Related
Aug 24, 2010
I keep getting this error when trying to update but I know it is a bug and has been filed as a bug report.
Code:
Failed to fetch cdrom://Ubuntu 10.04 LTS _Lucid Lynx_ - Release amd64 (20100429)/dists/lucid/main/binary-amd64/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Failed to fetch cdrom://Ubuntu 10.04 LTS _Lucid Lynx_ - Release amd64 (20100429)/dists/lucid/restricted/binary-amd64/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Some index files failed to download, they have been ignored, or old ones used instead.
View 9 Replies
View Related
Oct 5, 2010
I am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
View 1 Replies
View Related
Nov 29, 2009
i use fedora 12 i can't use yum any more , when i try i find error message it was working correctly and i donn't remember what i did
[root@PC ~]# yum list installed| grep -i nmap
rpmdb: Thread/process 2405/3078244032 failed: Thread died in Berkeley DB library
error: db4 error(-30974) from dbenv->failchk: DB_RUNRECOVERY: Fatal error, run database recovery
[code]....
View 4 Replies
View Related
Jul 6, 2011
i am trying to update my system from a new clean install that i made i am running the update from yast and i am getting the listed message:
Code:
Subprocess failed. Error: RPM failed: rpmdb: /var/lib/rpm/Basenames: unexpected file type or format
error: cannot open Basenames index using db3 - Invalid argument (22)
View 8 Replies
View Related
Feb 18, 2011
Having a bit of an issue with Python while trying to write a script to download every rar file on a webpage. The script successfully downloads any link that doesn't contain any spaces, etc. But when it hits a url like: [URL] (Classical Spelling).rar. It fails...I'm sure this is something simple, but I'm so new to python I'm not sure what to do!
Code:
import urllib2
import os
os.system("curl [URL] -i rar|cut -d '"' -f 2 > temp.out ")
infile =open('temp.out', 'r')
for url in infile:
print url
#url = "[URL]"
#url = target
file_name = url.split('/')[-1]
u = urllib2.urlopen(url)
f = open(file_name, 'w')
meta = u.info()
file_size = int(meta.getheaders("Content-Length")[0])
print "Downloading: %s Bytes: %s" % (file_name, file_size)
file_size_dl = 0
block_sz = 8192
while True:
buffer = u.read(block_sz)
if not buffer:
break
file_size_dl += block_sz
f.write(buffer)
status = r"%10d [%3.2f%%]" % (file_size_dl, file_size_dl * 100. / file_size)
status = status + chr(8)*(len(status)+1)
print status,
f.close()
View 7 Replies
View Related
May 11, 2010
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
View 3 Replies
View Related
Apr 29, 2011
...../etc/init.d/before.local...System Console Stolen at line: 266 This line of red warning consistently appears immediately after something that ended with /etc/init.d/before.localThis is during the boot.Have anyone see it before ?It appears both in kernel versions:2.6.37.6-0.5-desktop2.6.37.1-1.2-desktop
View 3 Replies
View Related
Mar 6, 2010
I have a code over there. It reads a line from file and converts contents of it to double.
Code:
/*
* fileRead.c
[code]...
View 2 Replies
View Related
Jan 26, 2011
Ive looked up and down but i cant seem to find an answer to my question. Why cant i upload to my ftp site. I am running a lamp server and i installed proftp. i created users and groups. i tested my server and its working fine. but now when im working on dreamweaver to connect to my ftp... It connects fine i can download my files from the site but when i edit them and try to "put" them back. i get an error:
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
[code].....
View 2 Replies
View Related
Mar 31, 2011
I backed up .themes from /home, but on trying to install them (files don't show as theme packages) it says "There was an error installing the selected file, index.theme doesn't appear to be a valid theme". Did I backup the right thing?
View 1 Replies
View Related
Apr 15, 2011
i used when i open my computer everyday that it asks me for updates... but since 20 days till now it didn't ask me for updates like before .. and today .. i was surfing the web .. then the update manager appeared with a notification to update and asked me to hit the button (RUN THIS ACTION NOW) i did hit it .. but when i switched the detailed view ... all the packages were marked by these words : FAILED or HIT .. Then .. this error message appeared :
[Code]...
i dont know what to do with this issue ... i am not professional in ubuntu ..
View 3 Replies
View Related
Jan 27, 2010
[Code]....
W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems
View 5 Replies
View Related
Sep 3, 2011
I just reinstalled opensuse 11.4 on a lenovo ideapad. The install went well and afterwards I was installing other packages. In the midst of this I started getting a error both from the gui software management package and zypper.(I tried zypper to see what would happen). I thought at first a simple refresh of the repos or a reboot would probably solve this but it did not.All attempts to do any software manage failsnow.The basic error is ( tail of a long list from zypper)error: error(-30987) getting "" records from Requireversion index error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Provideversion index from a zypper update and something about the same from the gui. How can I solve this?
View 5 Replies
View Related
Feb 1, 2010
I am trying a release of Ubuntu has have run into a problem that does not make much sense. I am receiving the following error: Syntax error on line 20 of /etc/apache2/sites-enabled/portal: Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration
fail! I believe the modules required for this is apt-get install libapache2-mod-proxy-html and it shows under the available modules and it was enabled with a2enmod proxy-html.
The line from the config is ProxyHTMLEnable On. The release is the latest download with updates from, 32bit.
View 4 Replies
View Related
Jul 12, 2011
I have installed XAMPP on my system and started it just fine, but for some reason when I type "http://localhost/myDirectory/index.php" into the address bar of a browser, I get a 404 error. I followed the instructions hereand after creating test.php, I was still not able to view it. Can someone please tell me what I am doing wrong?
View 11 Replies
View Related
Dec 25, 2010
I am getting virtual-box repository download error as given below:
Code: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. Repository: deb http://download.virtualbox.org/virtualbox/debian marverick non-free
View 5 Replies
View Related
May 1, 2010
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies
View Related
Mar 24, 2010
i tried to install banshee media player using zypper but it gives me this problem
[Code]...
Second problem my cd writer is kinda out of order so i followed this guide (Live USB stick - openSUSE) to make a live usb stick to try out other distros...... everything went well....dd wrote everything properly.....but when i try to boot, it says thats it is a non-system disk and says to replace it strike again....so basically its not working.....
i think i followed all the instructions in the guide properly....but still i am pasting it over here (the drive was given as sdb...i checked using ls -l) umount /dev/sdb dd if=/home/arkadeep/LinuxMint-8.iso of=/dev/sdb bs=4M;sync i used linuxmint..... yeah so dd writes everything and the size is also correct. so now i can't figure out what to do...
View 5 Replies
View Related
Feb 1, 2011
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies
View Related
Sep 18, 2010
When I tried to upgrade my xubuntu 10.04 , I got this error
dpkg: parse error, in file '/var/lib/dpkg/available' near line 2 package 'x11proto-core-dev': value for `status' field not allowed in this context E: Sub-process /usr/bin/dpkg returned an error code (2)
View 5 Replies
View Related
Nov 19, 2010
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 6 Replies
View Related
