Ubuntu :: Erase It And Reinstall Windows Xp
May 2, 2011
job installing windows XP and a partion ubuntu (?) on my desktop compooper. telling him i have no knowledge of ubuntu, he still isntalled it. I am giving this computer to my parents, and want to just put Windows XP on it. here is what a half *** job means, windows XP doesn't have the sound and ethernet driver. he couldn't find them to install them onto the computer...and i keep getting errors all over the place when i try and do things on ubuntu.
I downloaded Windows XP Professional 64bit Corporate yesterday and burned it to a CD. Restarted the computer so it will boot but it just keeps going to the screen asking which system I want to log in to. NOW HERE IS THE KICKER.... when i try to go onto the windows XP side, it is coming up with an error that says I need to activate windows. when i click yes, it says i have already activated. when i click on the user it repeats what i just stated. so now i can't even get into the windows xp side.
View 5 Replies
ADVERTISEMENT
Oct 11, 2010
Several moths ago I installed Ubuntu 10.10 Maverick Meerkat alfa3 in a newly created partition while I was using Ubuntu 10.04 Lucid Lynx. After I installed the 10.10 alfa3, I realized that it also installed its grub. Moreover that grub could not detect the kernel updates of 10.04. Thus, I recovered the grub of 10.04 via live CD. Interestingly after I returned the grub of 10.04 the boot time of 10.04 has considerably increased.
For example, the Ubuntu splash screen appears 20 seconds after selecting Ubuntu in Grub menu. I thought that a fresh installation for 10.10 final release would solve the problem but it seems that I'm still getting the same boot time until the splash screen is the same. It seems that I need a fresh installation of Grub. The methods that are introduced following url are just recovers Grub. I need to erase and reinstall the Grub. [URL]
View 2 Replies
View Related
Aug 29, 2010
I would like to completely erase my hard drive and install Ubuntu 10.04 on again fresh. I think some files have become corrupted from a power cut that I had last night whilst the laptop was plugged in (and turned on).
I'm not bothered about completely wiping the hard drive since there are no important files on it (at most there are just a lot of packages I downloaded from the repro...) I don't have any Windows installations either - it's just a simple; wipe the hard drive and reinstall all over again case
View 2 Replies
View Related
Apr 29, 2010
I recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
View 6 Replies
View Related
Oct 18, 2010
Stupid question time, but just to make sure (I really don't know anything about hardware):
If Ubuntu LiveCD (or a dual-boot) works on a laptop, is it safe to completely erase Windows from the harddrive - including the hidden partition?
View 8 Replies
View Related
Oct 12, 2010
Can anybody explain step by step how to erase windows xp from the computer and how to install Ubuntu?
View 2 Replies
View Related
May 1, 2011
How can I change or erase windows XP password from Ubuntu Live (11.04) booted on the PC in question? I reckon it should be possible, at least it is possible to do so to another Ubuntu installation, but I never knew how to do it to XP.
View 1 Replies
View Related
Oct 7, 2010
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
View 6 Replies
View Related
Feb 2, 2011
How do I format another drive to "accept" Linux and delete/erase Windows?
View 6 Replies
View Related
Mar 1, 2010
I've been using Ubuntu for a couple of months as a wubi install. I've been able to do everything in Ubuntu and have not had to resort to Windows at all. I do have another Windows computer that is networked to this Ubuntu machine. It must remain Windows so I do have a Windows machine for a pinch. The question is I'm thinking of reinstalling Ubuntu on this machine by itself . No more Windows at all. What will I gain & what will I loose.
View 7 Replies
View Related
Apr 18, 2011
I'm running dual OS Windows Vista Bussiness and Ubuntu 10.10 on my acer notebook. But a few days ago after I update the kernel (I think), I can't boot to my windows OS. It's only stuck at boot screen (progress b4 logon to windows), so I want to reinstall my windows with windows XP. But, if I do this, the grub must be replace by windows bootloader. how to reinstall the grub?? will the new grub, allow me to load the latest kernel which already install on my Linux?
View 1 Replies
View Related
Aug 30, 2011
I installed the Ubuntu 11.04 inside of Win 7 via Wubi. It works great and I don't want to reinstall it again, now I want to reinstall my Win 7, is there a way to keep Ubuntu?
View 1 Replies
View Related
Jan 5, 2010
How do I reinstall GRUB after a Windows install? I tried using the LiveCD but when I pop in the CD and type
Code:
View 2 Replies
View Related
Feb 16, 2010
I installed Ubuntu 8.10 with Wubi under Windows XP. Now the Windows XP installation is damaged due to some filesystem stuff and doesn't boot anymore. Ubuntu still boots and works well.So I want to reinstall Windows.But, I want to use Windows 7 instead of XP. What I want to achieve is, that after the reinstall process I have the same Dual-Boot menu but with Windows 7 and Ubuntu.Windows XP is currently installed on Windows Partition C:, Wubi/Ubuntu is installed on another partition D: (where also a lot of Windows files are located).So can anyone tell me the steps, or point to some documentation how to do this? I don't actually think it's a huge problem, but I wanted to know in advance, what exactly to do before the point of no return. It's extremely important that the ubuntu installation will not be damaged or sth.
View 9 Replies
View Related
Sep 30, 2010
I have Ubuntu 10.04 on my laptop. If I wanted to reinstall Windows Vista over the top of Ubuntu 10.04, do I just install Vista normally, as if I was reformatting the hard drive?
View 3 Replies
View Related
Nov 21, 2010
I re-installed Windows over an old Windows partition. The hard-drive used to have Windows and Ubuntu on it. I am now in usb live ubuntu because grub doesn't appear anymore when I boot the computer (it boots in the new windows automatically). The ubuntu partition is still there, as I can access my files from this live usb. I'd just like to know how to re-install grub.
View 1 Replies
View Related
Nov 30, 2010
I was wondering if i could reinstall the windows bootloader with the ubuntu installation cd..because with the current ubuntu installation the windows 7 installation dvd doesnt load up. when i use a windows xp cd, the computer tells me that there is no active hard drive. other linux distros work just fine
View 7 Replies
View Related
Mar 25, 2011
I currently have Ubuntu 10.10 64 bit installed and I would like to reconfigure my partition so I can reinstall Windows 7 � 64 bit on my computer.
I have the recovery disk that HP sent me and I have tried Virtual Box and no luck, so just to avoid any problems I would like to spilt the partitions and set up the grub bootloader so I can have Ubuntu and Windows as a choice a start up.
Is there an easy way to do this or do I need to completely reformat my hard drive?
View 4 Replies
View Related
May 26, 2011
I have (had) a dual boot system of Ubuntu (11.04) and Windows 7. I was forced to reinstall Windows over itself and it installed its boot loader. How do I get my Grub boot loader back? I googled it and found instructions, but they were from 2007 so I thought it might only be for Grub Legacy. The instructions were as follows:
Boot from a live cd
run "sudo grub" in a terminal
then, "root (hd0,0)", "setup (hd0)", and "exit"
reboot and grub should be present
While I wait for ubuntu to download so I can create a live cd, can someone confirm if this is correct for Grub 2? Also, what commands will tell me which hard drive and partition I need to put in the above commands (hd0,0)? I have (4) internal hard drives and boot drive has a few partitions on it.
View 4 Replies
View Related
Jun 26, 2011
So, I'm stuck in GRUB rescue mode (stupid mistake) on a dual booted netbook (so no cd and no recovery software)
I do have a Live USB so I'm working off that.
Is there a way to reinstall the GRUB to my other partition (windows 7) or fix the MBR without recovery software?
View 9 Replies
View Related
Mar 21, 2011
I had previously installed windows xp. Then I installed ubuntu and dual booting was fine. Now my windows is corrupted. I need to either repair or reinstall it, and I think my mbr will be affected. I will test all this on vmware first.
View 2 Replies
View Related
Jan 19, 2010
My friend recently re-installed WinXP on his laptop, but I'm having trouble getting Grub2 working. I followed a guide online, but when I booted it back up again, I got a Grub prompt instead of a boot menu.
View 4 Replies
View Related
Aug 9, 2010
I recently (for about the third time) HAD to re-install Windows 7. It just wouldn't boot and unfortunately I have some proprietary software that I need to use. Anyway, this is the first time I've had to do so since installing Lucid (64bit, fresh install). My problem now is, when I re-installed Grub2 (using the same methods that have previously worked flawlessly) to recover it after re-installing windows, only windows shows up in the grub menu, showing options to boot to Windows on sda1 and another to boot to Windows on sda2.
I grabed a "boot info script" from Rubi1200 and this is what I got..
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /grub .....
View 7 Replies
View Related
Nov 26, 2010
How will I go about getting the linux Dual boot screen back
ubuntu 10.10 desktop
Win XP H.E.
View 1 Replies
View Related
Dec 9, 2010
I need windows because iscan under Ubuntu does not work well. So I have a dual boot. Trouble is that windows is only good for a month because I can't validate it because I have it on another machine also.
So, my month is up and I can not longer access windows. I could do a complete wipe and reinstall windows and then put Ubuntu next to it but that is a lot of work. Can I just reinstall windows and get my boot loader to operate properly again? Or is it actually easier to do a total wipe out and reinstall? I have tried to restore grub before and I failed miserably.
View 2 Replies
View Related
Dec 26, 2010
for some reason Win7 has gone and run a startup repair (there was two boot options in GRUB, perhaps I chose the wrong one by accident) which has corrupted my GRUB. Now, the only way I can get anything to run is by booting Ubuntu of a live-pendrive/flashdrive! I tried following a couple of walkthroughs that claimed to fix the problem; and I don't doubt that they work - on someone elses computer! I receive errors whenever I try to use things like 'sudo grub' and often (but not always) with 'mkdir' and 'mount' - and I have very little idea what some of them are doing (I gather 'mkdir' is making a directory and 'mount' is mounting a device virtually, but some others are a little harder to guess)
So, I am wondering if someone has a little insight as to how I can fix this and perhaps point me in the correct direction to learning about making my way around ubuntu and these fancy terminal commands! Currently, I am at the stage where I can boot into my flash drive by spamming escape before the bootloader. However, when GRUB loads it tells me there is an error and gives me a command line; through which I have been unable to get anything to happen. I am running Ubuntu 10.10, I believe, and Windows 7 on the same hard-disk and possibly the same partition (though, I am unsure of how Ubuntu works itself into partition's). I also ran a little code (seemed somewhat like a batchfile in windows) that made a txt file of my boot info; I'm attaching it below if that helps at all. Boot Info Results:
[Code]......
View 9 Replies
View Related
Jun 11, 2011
After installing Windows 7 on my laptop, which was already running Natty, I am having issues reinstalling grub. I tried to do this using the method from this tutorial: [URL]... when I enter:
[Code]...
I also tried using --root-directory instead of --boot-directory, and I tried --recheck on both of them without any luck.
View 9 Replies
View Related
Aug 7, 2011
After reinstalling Ubuntu, I cannot reach the windows computers (both on the MAISON workgroup). Since I have not changed a thing to these two win machines, I assume something is wrong with my Ubuntu config.Samba is installed and running (or so it seems). Dolphin shows the Samba shares, but give this errormessage:Unable to find any workgroups in your local networkthis is the testparm output :
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
[code]....
View 6 Replies
View Related
Nov 18, 2010
i have windows xp and federo installed on my system on seperate partition and using grub loader for dual boot. Unfortunately am unable to boot the windows and it hangs with the blue screen and with safe mode it stops at mup.sys and doesnt proceed further.I tried booting with a windows xp CD but it looks like it is unable to recognize the disk even if i say boot with a CD in BIOS settings. Does anybody knows how to make the CD recognizable so that i can go into the windows repair mode.
View 9 Replies
View Related
Jan 9, 2010
Some days ago I decided to reinstall windows, of course windows wiped Grub of the MBR. No problem. I booted of the live CD (9.10) and tried to reinstall grub, I had Ubuntu 9.10 installed before windows wiped grub. I tried the following tutorial: [URL] My fdisk -l output is the following: root@ubuntu:~# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000f2962
[Code]....
sda3 is my root partition, sda2 is the partition where all my media files are located. I mounted /dev/sda3 to /media/root and then I tried to reinstall grub with: sudo grub-install --root-directory=/media/root /dev/sda It came out with no errors, and then I restarted my computer. Grub started, but with a command line. It was the 1,97 beta-4 version. Since I'm quite unfamiliar with GRUB (or really technical linux stuff)
View 3 Replies
View Related
