Ubuntu :: Ekiga And "security Check Failed"
Jun 28, 2010
I was looking for a software to use for VOIP calls and I tried Ekiga (since Empathy does not seem to work at all for VOIP) I installed, checked the sound settings and all worked fine. I setup the first account I have with my SIP provider and it worked fine. The I setup another account I have with the same SIP provider. The settings have been tested time and time again and they are correct. Both account work perfectly on a windows machine with X-lite, but on Ekiga, with the second account, I cannot make any calls because I get the "security check failed" message. yet the settings are correct and they are the same for both accounts (apart from username and password of course). Unregistering from one account and registering into the other does not make any difference. It just does not want to play nice. if anyone has a better suggestion for VOIP calls.
View 1 Replies
ADVERTISEMENT
Aug 25, 2010
Is there a way to to check if the system has the available security updates installed? Specifically, I am looking to do this programmatically.
View 1 Replies
View Related
Jun 8, 2011
went through the tutorial on FedoraSolved for securing ssh. I installed denyhosts with yum and then tried to run it with the command line command"sudo /etc/init.d/denyhosts start" but I got the message"Job Failed. See system logs and 'systemctl status' for details [FAILED]"and in the application "services" in the applications menu,t shows an exclamation warning and says that "This unit has failed"
View 1 Replies
View Related
Mar 9, 2010
I've been stupid, and used kleansweep, which deleted a load of files and in the process killed everything. When I boot I get "file system check failed". Then it gives me a command prompt. I really don't want to have to reinstall ubuntu as I have a lot of stuff installed on it.
View 9 Replies
View Related
Mar 10, 2011
I have a Hp Netbook, and my friend installed Ubuntu to my computer. Everything was going fine, until one day my battery died while I was searching the web. I turned it back on and It started checking files and then it took me to a black screen with white letters saying "File System check failed".
View 3 Replies
View Related
Apr 25, 2011
I applying changes through update manager in ubuntu 10.04 then my computer froze. So I had to restart it manually.
Now I can't boot ubuntu normal or recovery mode.I get an error message saying 'the disk drive / is not ready yet or blah blah'.I don't have a livecd to fix it this with... but here is my 'cat /etc/fstab' relevant output
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
View 9 Replies
View Related
Jan 23, 2010
I have got arch Linux dual booting with Win XP on my laptop. I have been getting a filesystem check error since yesterday and am unable to start Arch. Upon googling and searching the arch fora, I came upon some advice which I tried which has not worked yet. Hence the new post.Basically, I was attempting to print something off and accidentally chose a printer that was not connected to my laptop. After half a minute or so, it repeatedly started giving me notifications that the printer was not connected...in excess of 200 messages that the printer was not working which continued to pop up despite me canceling the print job. The whole system got really sluggish (for the first time in the last year) and I had to restart the laptop upon which the boot messages appear. It gets to the point where its loading the various filesystems. It mounts root and says it fine.
I tried fsck which tells me that home and boot are still mounted.So I booted up using an Ubuntu Live CD and checked and repaired each file system which it successfully did. Upon rebooting into Arch, I am getting the same message.I have not installed anything new and had upgraded the whole system a few days before the problem started.
View 13 Replies
View Related
Feb 10, 2011
My system from and after that at startup as it was doing a file system check I got this:
Checking file systems ... fsck 1.41.3 (12-Oct-2008)
/dev/sda1: clean, 30/124496 files 34735/248976 blocks
/dev/hda1 contains a file system with errors, check forced.
[code]...
View 6 Replies
View Related
Jul 4, 2010
I've been a long time ubuntu/debian user, and I decided to give fedora a try. Durng my first set of updates after install, the updater (gpk) seemed to stall on an 'updating libraries' step (it lasted for over 12 hours). Anyway, I force quit the program, restarted the system, and all appears fine. What I wanted to ask is this; is there some way to check the yum log to see if the update completed successfully, or an equivalent to 'apt-get -f install' to fix any broken/partially installed packages.
View 3 Replies
View Related
Apr 24, 2010
I'm installing and configuring my first server using RackSpace CloudServers running Ubuntu Karmic Koala (9.10) and I'm now installing iRedMail. The installation runs successfully until I recieve this error:
Code:
The following packages have unmet dependencies: mysql-server-5.0: Depends: mysql-server-core-5.0 (>= 5.1.30really5.0.83-0ubuntu3) but it is not going to be installed
E: Broken packages < ERROR > Installation failed, please check the terminal output. I understand this is telling me there is some software that iRedMail (or something iRedMail is dependant upon) that needs installed. Is this correct? And if so, what is i needing installed and how do I do that (aptitude install example-package?)?
View 4 Replies
View Related
May 6, 2010
I have a Wubi installation, and the upgrade to 10.04 froze. I didn't note down the point at which it froze.
When I tried to reboot, I got the grub screen, and when selecting Ubuntu I get lots of text messages scrolling by, but it freezes at battery check.
The machine boots fine into Vista.
Rather than spend a lot of time trying to figure out what went wrong in the upgrade, my inclination is to delete the Wubi installation from within Windows, and then do a fresh install of 10.04 under Wubi. Is this feasible/sensible?
There are a handful of files I would like to salvage from the prior installation, however. Could I do that with a Live CD since the prior installation was under Wubi?
View 3 Replies
View Related
Apr 8, 2011
This is a Natty system. I ran update manager to update to the latest releases for Natty, and it crashed. I ran it again and it told me it could only do a partial upgrade, and that I should do apt-get install -f. I did that, but apt-get told me the system was locked by another program. Not to worry I thought, I'll just reboot. So I did that, and I think Update-Manager got a lot further through the process than I thought, because my system is borked. It'll boot into Gnome, but when booting up the Boot Screen no longer shows the pretty Ubuntu Logo, but rather a line of text that says "Ubuntu 11.04".
When it gets into Gnome the keyboard and mouse more or less don't work (although the keyboard based Fn+9 and Fn+10 brightness control still works) and there is no desktop background. After about 30 seconds something crashes but I can't click on it to find out what. Going into the recovery console doesn't help either. The latest Kernel (2.6.38-7) stops moving forwards after "Begin:Running /scripts/init-bottom...done". has occurred for the second time. Luckily I still have the previous kernel, which gets to the same spot and then tells me:
"init: udevtrigger main process (390) terminated with status 1" and then "init: udevtrigger post-stop process (394) terminated with status 1".
I then get the message
"The disc drive for / is not ready yet or not present. Continue to wait; or Press S to skip mounting or M for manual recovery". S goes back to "Begin:Running /scripts/init-bottom...done" a second time, M brings up the message:
"Root filesystem check failed. A maintenance shell will now be started"
and then it asks for the root password and gives me a terminal. Everything seems to be there, but apt-get and dpkg both can't do anything as the filesystem is read only.
View 9 Replies
View Related
Oct 28, 2010
I have recently updated my ATI drivers to Catalyst 10.10 (ati-driver-installer-10-10-x86.x86_64.run) from the AMD website and I have not been able to get KWin to enable compositing.
I am using:
openSUSE 11.3 x64
KDE 4.5.2
[code]....
View 1 Replies
View Related
Feb 25, 2010
I have Ubuntu 9.10 installed on my HP desktop, but I'm running an older version (8.10) on a live CD so I can at least get online to ask for some When I tried to log on earlier it went to a command prompt and said the 'file system check failed' and to run fsck manually. I entered 'sudo fsck' at the prompt and I selected "y" to fix all the bad inodes, when it was complete it told me to restart, I then entered 'sudo restart' at the prompt and it said 'sudo uuid unknown'. I have not installed anything recently and I'm not sure what to do.
View 3 Replies
View Related
Mar 26, 2010
I can see what Firestarter is blocking in the Firestarter/Events tab, but after reading all the man pages of UFW, I still don't know how to check what the UFW is blocking.
View 9 Replies
View Related
Apr 5, 2009
I am configuring RAC 10gR2 over linux 4EL (two node over san) , as for as configuration is concerned every thing went fine ,every thing is passed in cvu utility , the only problem is that when i start setup it through following errors, SSh rpm are intalled on both machines , as i established eser equilence between oracle user ob both machine it is working , BUT i dont know y the follwing erorr apear , Could u tell me how to resolve this error
here it is ....
[oracle@rac1-pub orainstall]$ ./clusterware/runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-03_06-23-31AM.
code....
View 2 Replies
View Related
Jul 31, 2011
I just installed Ubuntu 11.04 but "whenever i try to download or install any software from 'Ubuntu software Center'it gives error: "Failed to download Package Files Check your internet Connection" Internet is working fine!I've also tried the command: "sudo apt-get update"
View 2 Replies
View Related
Aug 10, 2010
I have Ubuntu 10.04 and I used my ssh to connect to a webserver. This is the version that I have installed.
Quote:
OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009
Apparently the server was hacked using my user and the server admin suggested the my ssh can be tainted.
do a checksum of the ssh, but I cannot find this file on my system.
Code:
md5sum /usr/sbin/sshd
And I will need a md5 hash from a good untainted version and I cannot find that as well on the openssh website.
View 7 Replies
View Related
Apr 3, 2011
having a slow internet connection, I bought the all maverick repository on DVDs, copied the files on a usb drive and modified the apt sources file to consider the local repository only:
Code:
# deb file:/var/www/ubuntu_local/ ./
deb file:/var/www/maverick/dvd1/ maverick main universe restricted multiverse
deb file:/var/www/maverick/dvd2/ maverick main universe restricted multiverse
deb file:/var/www/maverick/dvd3/ maverick main universe restricted multiverse
[code]....
Even though I am reasonably sure it is safe, this local repository is not authenticated and I can only install package through the command line or synaptic, the Ubuntu Software Centre giving an error message "Requires installation of untrusted packages"...I thus would like to disable the apt authentication check for this local repository.
View 2 Replies
View Related
Feb 24, 2011
I tried changing the source to a few different ones and I picked "Select Best Server". Still getting the same msg. I am on a wired connection and there is nothing wrong with my connection.Anyone know the solution if not how do I install nvida drivers?
View 1 Replies
View Related
Aug 2, 2010
i was thinking that is there a way to check data flow for viruses? i mean if i set up calm av in my internet sharing server could it detect anything in incoming and outgoing data ?!!
View 2 Replies
View Related
Nov 8, 2010
I recently ran a rkhunter check and in my log i have found some very odd (to me at least) reports.
/usr/bin/last [ Warning ]
Warning: The file properties have changed:
File: /usr/bin/last
[code]....
View 9 Replies
View Related
Aug 8, 2010
I recently decided that I want to install mplayer on fedora 13. Problem is, everytime I try, a new problem arises. I've tried add/remove software, and it said "package download failed, check internet connection" which doesn't make sense because I'm connected to the internet and my connection is fine. So, then I tried yum install mplayer, that gave me an error.
View 5 Replies
View Related
Jun 7, 2010
I have recently installed ubuntu 10.04. The distro seems so much better than that I have before (8.1). Anyway after some days of trying I can say that ekiga doesn't work with 10.04. While I was perfectly able to use ekiga with 8.1, the 10.04 gives me connections problems.... it simply say says "Could not register (Failed)"
how to set a sip account (sip.12voip.com) with empathy??
View 7 Replies
View Related
Jul 5, 2009
I'm trying to do an online security check on my Linux system.I would like to do a Firewall/Antivirus test. What free online sites do you know?For instance, I use ShieldsUp to test some firewall's components.Does someone recommend anything else?I still can't find a site that tests for the presence of virus/malware installed.Are there any?
View 8 Replies
View Related
Mar 27, 2011
Is there a plugin or some other way to check to see if a website has https available, and use that instead? I know some sites, like Wikipedia have a different hostname for SSL support while others have the same hostname, just What I would really like to seesome kind of header in the http reply or the html that saysSecureAvailable= is there any system like this in place? There's too many issues with with unencrypted http to continue having that as the default.
View 3 Replies
View Related
Oct 15, 2010
I have been forbidden to enable automatic updates on our Ubuntu servers, for both security and regular packages.When I log into any of my four Ubuntu servers, the welcome message contains this:
39 packages can be updated.
26 updates are security updates.
However, when I run the Nagios plugin that monitors APT, I get:
% /usr/lib/nagios/plugins/check_apt
APT WARNING: 33 packages available for upgrade (0 critical updates).
I need to know how to properly detect that there are pending security updates, and regular updates. Once I can do that, I plan to write a Nagios script that will return WARNING for pending regular updates, and CRITICAL for pending security updates.
View 1 Replies
View Related
Feb 25, 2010
I have been using the new ocr app 'cuneiform' that has appeared in the Lucid repo.It is command line and works very well.However, the rest of the household would like to use it and desire a gui front-end.Mepis has this and it is called YAGF. Works well.We are told to install only from trusted sources.how can I check the integrity of this .deb and freedom from malware before installing it?
View 5 Replies
View Related
Jan 17, 2010
I'm trying, reeeeally trying to use Ekiga. But the video quality is horrible. So I started messing with the settings, lo-and-behold I find info about h.264 and how fantastic it is. Well, I say to myself, let's try that on for size.
What? No h.264 option in Ekiga. That's weird, especially considering they have supported it since 3.0 and I'm using the version in the Karmic repos, 3.2.5. Not free, ok, I'll just install it then, right?
x264 package didn't do it. A little ffmpeg install as well. libavcodec52, which uninstalled a buttload of other stuff also. Even dl'd and installed libopal3.6.4-plugins-non-free. All to no option for the h.264 codec option in Ekiga.
Oddly enough, the libopal non free plugins DID add the iLBC audio codec into Ekiga as on option. Why not h.264? What am I missing? Also, why is this SO difficult? There is not any decent documentation that I can find out there that goes over this. Google has failed me.
All I have in the video codecs is theora and h261.
View 9 Replies
View Related
Mar 22, 2010
When I click on the Ekiga menu-item it seems like nothing is happening. So I went into htop and saw the process is running. When I start Ekiga from the command line, nothing happens as well. Then I tried starting Ekiga in debug modus with option -d 5. Still nothing showing up. When I call my VOIP number I can see a call coming in, however there is no ringing sound and no dialogue to pick up the phone.
Then I re-installed by 'aptitude purge ekiga' and then 'aptitude install ekiga'.
I am working on Ubuntu Karmic. The Ekiga version is straight from the repositories: Version: 3.2.5-1ubuntu1.
I hope someone has an idea what to try next.
View 1 Replies
View Related
