Ubuntu :: Connect To New Networks Using Network Connections?
Jan 23, 2011
Somewhere I've lost the Network Manager. it is listed in the installed programs as well as I can see all the components but do not see it in the menus anywhere nor the icon in the top panel... So even though I can connect to the wifi networks that I have connected to before it is very difficult to connect to new networks using Network Connections or so I find... I've tried reinstalling it many times but always find it saying installed but can't really access it... So how can I change that or are there a better network connection manager out there ???
View 2 Replies
ADVERTISEMENT
Mar 26, 2010
i have ubuntu 9.10 on a lenovo s10. i had my alfa awus036h and it worked fine no issues. except for having to reconnect every hour or so. anyway i got back track 4 final and installed it on usb with unetbootin. i started to use wicd and etter cap on it. and i made sure to turn off wicd when i was done then i went back into ubuntu (i didnt install bt) and i started to have problems like everyone else. slow connections ,disconnects after 1 min, and can still connect to networks but cant surf.
View 1 Replies
View Related
Sep 20, 2010
I am total newby in Ubuntu 10.04. I have just installed it in my office where I have two networks card one connect to a router giving the internet access and the other connected to the windows based work network providing access to the work network sources. In XP everything works fine as I can keep both connections alive and have the results I want.
However although I don't know how to do it in Ubuntu 10.04. Till now I have setup the first connection directly to my router and I have internet access but I cannot set the other one. Another question is how I can force ubuntu to use the router connection as the default one when I log in.
View 5 Replies
View Related
Jul 2, 2010
I have a problem with network manager. I use Ubuntu 10.04 on a Dell Latitude D530. I used to have the same problem with Ubuntu 9.10 before I upgraded. I typically connect to two wireless networks: HOME and WORK. Both networks are set to automatic connection mode. I am at work, I connect to the network WORK. At the end of the day, I just close the lid and go home. At home, I open the lid and have the following problem: network manager still displays the network WORK whereas it is clearly out-of-range and it automatically tries to connect to it. It does so until network manager asks if the password is correct.
If I want to connect to HOME, I have to tell network manager to do so. Then, I receive a notification that I am disconnected to WORK. Next morning, I go to work, and I have the same problem, network manager tries to automatically connect to HOME. What I would expect from network manager: when I am at home, NM automatically connects to HOME and does not display WORK, when I am at work, NM automatically connects to WORK and does not display HOME.
View 3 Replies
View Related
Feb 26, 2010
I use network-manager-gnome to connect to my wireless networks, but I can only use it with a graphical environment, and it doesn't even work that well since it will drop the connection after a few minutes and I have to reconnect it manually, that means I cannot leave my computer downloading a big file all night since it will only download for a few minutes, does anyone know what package can I use to connect to my wireless without the need of network-manager, even if it's through command line?
View 9 Replies
View Related
Apr 28, 2011
I have been an Ubuntu user for a year or so. My level is still ultra n00b but I am trying. Whenever I update Ubuntu there is always a WiFi problem, always. So now I am having problems getting wifi to work in 10.10. In Network Manager I can view wifi networks fine but I cannot connect. I tried with wicd also but I got as far as "getting ip" and then it would hang up.
lspci
Code:
Code:
Code:
I am not sure what driver I am using as I don't know how to exactly ID my driver. I know there is a way to ID the driver using airodump-ng but I have yet to find it.
I have a feeling this is a driver issue as one time I was able to establish a connection that then dropped a few minutes later. I have a feeling I should be disabling/removing the current driver and replacing it with ipw3945 or possibly a driver ndiswrapped? The problem is I cannot figure out how to remove the current driver.
I was going to switch back to 9.04 but I thought I would try to manually figure this one out instead of taking the easy way.
View 2 Replies
View Related
Aug 6, 2010
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies
View Related
Mar 2, 2011
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
May 30, 2011
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies
View Related
May 3, 2011
I can not connect to wifi networks, i can see them but not connect.
My wifi device is:
View 9 Replies
View Related
Nov 12, 2010
just downloaded ubuntu 10.10. I have a dell inspiron 1501. How do I search and connect to wireless networks?
View 4 Replies
View Related
Jan 24, 2011
I have an hp dm1z and ubuntu 10.10 64bit. After I suspend (close the lid) and wake it up (open the lid) at a different location with a network connection (wired or wireless), my system always fails to connect. I need to reboot and then it sees the network and connects fine. I have tried /etc/inet.d/networking restart, but nothing changes. The only exception to this rule are two networks that have WPA security settings and are stored. I can always switch between those two. I have tried ifconfig eth0 up & down and restart networking. I have also tried to connect manually (dhclient) and no success. None of these work. I am including the output of lshw -C network.
lshw -C network:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
[code]....
View 1 Replies
View Related
Feb 1, 2011
I have an MSI Wind U100 netbook running Maverick, and it has a Realtek RTL8187SE Wireless controller according to lshw. My computer can "see" some wireless networks where they are present, meaning when I click on the little network icon at the top of my screen it shows the available networks. But when I click on them to connect, the icon does its little "connecting" motion, but I never receive any message saying "Connected" and when I open Firefox and try to browse to google.com, it says "Server not found"
View 8 Replies
View Related
Mar 22, 2011
I have an ethernet card connected to my LAN and a USB cell modem internet connection. I am running ubuntu 10.10. The problem is this: I can use either network, but only am connected to one of them. If I connect to both at the same time my speed drops to zero.f I disconnect one, the other starts working. I have done a lot of searching and reading, but it looks like I don't know how to find what I am looking for.My LAN was setup as 3 WinXP computers peer to peer. One of those computers was replaced by this one that I am having trouble with (computer A). Another one was replaced by one that is not yet on the network (computer C).Computer B dual boots Win XP and ubuntu 10.4. Mostly it ns xp for Quickbooks and BobCAD, also it is connected to the printer. My router is setup for DHCP
View 2 Replies
View Related
Feb 7, 2011
have a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies
View Related
Jul 5, 2010
Well the thing is i cannot connect to a wireless network, when i log in the nm-applet won't show, if i wait about 20 minutes it will show .. and if i clicked on it requires a password, when i enter the password it freezes!! i tried uninstalling the nm-applet and reinstalling it, didnt work
View 5 Replies
View Related
May 22, 2011
While staying at a hotel that offered wireless Internet connection connection I was not able to access their network. I contacted their technical support 800 number and was told that the north building server had been down for 26 hours. I moved to a south builing room. Same problem. I went to McDonald's, which had wi-fi connection. Same thing. My laptop was not able to make a connection.
My question is as follow:
How do I find out:
1) whether it is a problem with my new Ubuntu version (10.04)?
2) my wireless card in my laptop is no longer working? Are there any tests that I can run?
View 2 Replies
View Related
Feb 26, 2010
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies
View Related
Jan 13, 2010
Does anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies
View Related
May 31, 2010
I'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
View 2 Replies
View Related
Mar 12, 2011
I have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
View 9 Replies
View Related
Mar 31, 2011
I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies
View Related
Jan 5, 2009
I have my box setup as a router/NAT with two different network cards. One for external connection(connected to the Cable Modem) one for internal connection(used for internal DHCP). It works perfectly when I manually activate the two interfaces after booting(both interfaces always show up as inactive after booting), then the DHCP server and firewall. I am confused, however, by which program has control of these interfaces.
First, there is the Network Configuration (System->Administration->Network), which is where I manually start the interfaces after rebooting. Both interfaces are set to "Activate when computer starts" in here.
Second, Network Device control(System->Administration->Network Device Control), which looks to be almost the same thing as the above.
Third, the NetworkManager applet(on the top bar) - both devices show up as unmanaged when I left click on this, but if I set "Controlled by Network Manager" in the "Network configuration" window(number one above), It still does not work. Can I get rid of two of these programs, or is there some way to edit the startup scripts to start my ethernet cards before the dhcp server/firewall(which is shorewall BTW)?
View 2 Replies
View Related
Jan 16, 2010
I recently ubgraded to ubuntu 9.10 from 9.04, but I had the same problem there. I can see the secure connections, but when I try to connect to them, it tries to connect, works at it for about a minute, and then asks for the password again. This just started a week ago or so. I am new with ubuntu, so while I know that there are terminal outputs I should probably post, I don't know which ones.
View 5 Replies
View Related
Mar 4, 2010
1) I connect to the internet on a wireless router from my isp.
2) I use an older router for my media server (pc) to my ps3. The router given to me from my isp is the only one I can use to connect to the internet, yet it has the worst UPnP support (ie: none).
So with this current setup, I have to disconnect from the the wired network to be able to access the internet. So how can I access the internet while still connected to the wired network?
View 7 Replies
View Related
Mar 23, 2010
I have a machine running Xubuntu [2.6.22-14-generic]. I have been trying to get this machine connected to wireless for ages, and I'm having another stab at it. So far I have install ndiswrapper and loaded the driver for a Linksys wireless adapter. The output of 'ndiswrapper -l' reports:
Code:
wusb11v4 : driver installed
devoce (13B1: 000B) present
So as far as my newbie knowledge goes, I believe that step to be completed, correct?When I turn on the machine is type in
Code:
sudo sh
modprobe ndiswrapper
to get the card running to where it will appear in the iwconfig dialog.The commands 'iwlist wlan0 scan' will list all the wireless networks around me, but I have been un-able to connect to any network, even unencrypted ones. I have tried to connect both through Wicd and command-line to no avail. For command-line I have used:
Code:
sudo ifconfig wlan0 down
sudo dhclient -r wlan0
sudo ifconfig wlan0 up
[code]....
With the final 'dhclient wlan0' commands, the following is returned:
Code:
There is already a pid file /var/run/dhclient.pid with pid 134519120
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium
[code].....
I have attempted to go ahead a step further and connect to an encrypted wireless network, however, I receive the same message, as well as another error message upon trying to enter the key, with the following code:
Code:
iwconfig wlan0 key s:"thekey"
Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument.
View 3 Replies
View Related
Jun 30, 2010
I have an Atheros AR242x card. It can see my wireless network (WPA2). When i attempt to connect to the network it asks for the WPA2 passphrase. After entering the password it begins connecting but hangs up for about 3 minutes before saying wireless disconnected. The wireless worked for one day on a fresh install (Ubuntu 10.04)and then started doing this.
View 2 Replies
View Related
Aug 1, 2010
I have a WLAN Driver Azure Wave AW-NU222 Wireless LAN Card in my Medion computer.
After installing Ubuntu it seems to detect the wireless networks in my area. However, when I try to connect to my network, it tries for several minutes and then times out with no error message. I have set up the credentials and also tried removing the encryption (WPA-PSK) from the network itself, but it still doesn't connect.
Connect via an Ethernet cable is fine, and I know that the network is good because I can connect via my Windows Laptop and various other wireless devices.
I suspect it's due to drivers, but I'm having trouble downloading a driver which I can try and install using Ndiswrapper. The Medion website just a windows executable when I try and download the driver specific to my machine when I really need the .inf file.
View 6 Replies
View Related
Sep 27, 2010
Here is a situation I have never come across (though I have only been using linux since 2004).I am running ubuntu 10.04 and using Wicd Network Manager.I can connect to my WPA encrypted home network, but if I go to my coffee shop to use their unencrypted wifi - I cannot.Even using the terminal. I think it is the way the device sees the network - but I don't know how to fix it.I have a screenshot with wicd here:And one with connecting to the essid here:Afterwhich, dhclient was unable to obtain an ipaddress - just like wicd above.
My iphone connected to this network easily without encryption or needing to use the browser to authenticate, etc.Any ideas on how to fix this?Specs:Samsung NC10lspci:
Code:
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[code]....
View 3 Replies
View Related
