Ubuntu :: Compiling With "Nothing To Make For All"
Jun 30, 2010I'm trying to install the graphics driver for Mesa3D. It configures fine but when I try to *make* it, it says "make: Nothing to be done for `all'."
View 1 Replies
ADVERTISEMENT
General :: Compiling Oci8 And Php 5.3.6 / Make Use Of Oracle-xe 10g?
Jul 14, 2011How do I compile oci8 and php 5.3.6 in centos 5.5, I want to make use of oracle-xe 10g
View 1 Replies View RelatedGeneral :: Create A MAKE File For Compiling?
Feb 24, 2011I've gone through some online tutorial on how to create a MAKE file and actually I don't have a complete understanding of it specifically, linking the particular compiling program to a library and also creating a share/dynamic library.
View 4 Replies View RelatedProgramming :: G++ Fails Compiling New Program / Make It Possible?
Jul 16, 2009I am trying to compile systemc. Configuration is done OK and Makefiles are created. As soon as the "make" command i issue, recursively reaches the "utils" directory, errors are produced -declaration and include errors.
The files referenced by the errors DO exist and i hava managed to give g++ "-I ${LD_INCLUDE_PATH}, ie the variable, where all header dirs are listed. Libraries and compilers for gcc3.3 and g++3.3, i believe, are installed OK. code...
Compiling RTL8192SE Driver :: Strange Error After Make
Apr 10, 2011I am running Debian 6 & picked up a wireless nic for my desktop since I want to locate it in an area that would be a challenge to wire. I downloaded the driver and ran make and got the strange error below. I tried doing some web research but could not find anything. I also booted up the machine w/ a Ubuntu Live disk to ensure the card was good and found no issues ( I also have the same nic in my kids machine running Ubuntu 10.10. )
[code]...
General :: Error Missing Separator When Compiling - Make
Nov 16, 2010I have problem with compiling server... I finish ./configure without any problem, and now, when I write make, I see that: Quote: Makefile:360: *** missing separator. Stop. I read something, and know, that error shows when there are problem with spaces. And I should use there a tab. On line 360 I have:
Code: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/account.Po@am__quote@ I try to change this one space inside to tab, but that doesnt work for me... Terminal always show error in the same line.
Software :: Compiling Evince From Source Code - Make Errors
Mar 20, 2011When I compile evince from its source code, I am able to run ./configure properly, but when I run make the following output is displayed.
Code:
make all-recursive
make[1]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0'
Making all in cut-n-paste
make[2]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste'
Making all in zoom-control
make[3]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste/zoom-control' .....
make[3]: *** [libevview.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
I am not able to ascertain the source of this error, even though I seem to have the file in question-libevdocument.la. What do I do now to remove this error?
Slackware :: Make Lincity Configure Properly Prior To Compiling?
Mar 15, 2010I have installed SDL_gfx, configured, compiled and installed perfectly fine, then I ran ldconfig, and yet I get an error from the install scrip of Lincity, complaining that I'm missing SDL_gfx -- I've read all the READMEs and INSTALLs for each, yet I can't see what I've missed.What do I need to do to make Lincity configure properly prior to compiling?
View 7 Replies View RelatedSoftware :: Make Error When Compiling Courier-authlib-0.55 - /usr/bin/ld: Cannot Find -linker
Feb 10, 2010I have been struggling to install courier-authlib. I have tried several version from 0.55 to the latest and I keep receiving the same error.
Linking libauthvchkpw.la
/usr/bin/ld: cannot find -linker
collect2: ld returned 1 exit status
make[2]: *** [libauthvchkpw.la] Error 1
[code]...
I have been googleing for the past week to try and resolve this with no joy. any help would be greatly appreciated. I am installing on CentOS 5.3 with config options as follows...
./configure --prefix=/usr/local --exec-prefix=/usr/local --with-authvchkpw --without-authldap --without-authmysql --disable-root-check --with-ssl --with-authchangepwdir=/usr/local/libexec/authlib --with-redhat
and when I run the make commands I receive the peceeding errors (above)
Programming :: Sms Server Tools Cross Compiling Sms Server Tool For An Embedded Computer And Make Just One Binary File For It?
Mar 27, 2010I wanted to know how can I cross compile SMS SERVER TOOL for an embedded computer and make just one binary file for it or how can I change all of its default files places like its demon and object file and gather all of them to one directory to execute and use and run.let me explain it better for you : I have an embedded computer with Linux OS that its file system is read only and I can not add any file to /usr /lib and ..... and I can just mount a SD memory card to it and copy all of my programs to it and run them from there as you understand I have two choices to choose, first make one big binary file for each program that I am doing it now and it is not a suitable solution and the second is finding the way to change default place of shared object file of my program.now you tell me what can I do to solving this problem.
View 1 Replies View RelatedGeneral :: Make Error - Make[2]: *** No Rule To Make Target
Oct 7, 2010I am getting an error as below.
How do I resolve the error: make[2]: *** No rule to make target `', needed by `mpg123'.
How can I resolve this error.
Ubuntu :: Contex Menu [Make Link] Make Same File Size?
Dec 17, 2010I notice that when you try to Make link to any file or folder form context menu, It just copy the same file size? even when i tried to copy the link to external storage disk..
View 1 Replies View RelatedUbuntu :: Make: *** No Rule To Make Target `gconfig'. Stop?
Jan 24, 2009I am following the instructions on Section 8.1.* Device Driver ConceptsHere I was able to proceed till section 8.1.4.After making the hello.c file,the make file and patching the Kconfig as mentioned,I tried to run the $ make ARCH=ARM CROSS_COMPILE=xscale_be- gconfig This gave error as:make: *** No rule to make target `gconfig'. Stop.I am not sure if my kernel is correctly compliled,but I was able to complie and build the kernel for arm before by cloning the kernel and building from the following link without any error. https://omapzoom.org/gf/project/omap...ux+OMAP+Kernel
View 2 Replies View RelatedUbuntu :: Cannot Make And Make Install In Gnome Shell?
Jun 20, 2011I just installed Gnome Shell in Ubuntu 11.04 through UGR Linux and everything works fine! The only problem is that I cannot run make and make install. I get the following errors:
Code:
alexandros@Autobot:~/gnome-shell/source/gnome-shell-extensions$ make && make install
Making all in extensions
make[1]: Entering directory `/home/alexandros/gnome-shell/source/gnome-shell-extensions/extensions'[code]........
Ubuntu :: Compiling Never Successfull?
Jan 5, 2011I have tried several times, but compiling always fails.I want to compile a litte program called dwg2dxf.I think all the needed programs are installed.First I unpack the tar.gz file on my desktop. Open Terminal, enter directory, then type"./configure"Everything fine, some files are created. config.log doesnt show errors (See config.log file)."make"Some errors occurenters some directories without doing anything, thenmain.cpp:39: fatal error: iostream.h: (translation) Doesnt exist.This is the text from the terminal:
familia@familia-laptop:~/Escritorio/dwg2dxf-2.1$ make
make all-recursive
make[1]: se ingresa al directorio /home/familia/Escritorio/dwg2dxf-2.1
[code]...
Ubuntu :: Compiling Kernel In 10.04?
Mar 2, 2011so I am wanting to compile my own kernel to see if i can get my laptop to run a lill better. I found the how too's to do the compile, but what I want to know is.. what is the most complete way to find all the hardware and such that is in my laptop so i can build all the support into the kernel that i need and leave out EVERYTHING i dont need.
i figured lspci is a start but there has to be more info somewhere to find the exact needs of the laptop.
Software :: C++ Compiling Wx2.8.10 On 64-bit Ubuntu?
Mar 7, 2010I went from mandriva 2009 32-bit to ubuntu 9.10 64-bit and wx begins to act up..
the simple program from the wx hello world tutorial build fine on my old system, but not my new on. I got the packages installed (wx2.8.10-dev, headers and whatnot)
I've looked around a bit and it seems the compiler is not including the files correctly..
Compiler command:
Code:
g++ k.cpp `wx-config --libs` `wx-config --cxxflags` -o morten
Compiler output sample (because most of it is because of first errors):
Code:
k.cpp:9: error: invalid use of incomplete type struct wxFrame
/usr/include/wx-2.8/wx/utils.h:50: error: forward declaration of struct wxFrame
k.cpp:12: error: ISO C++ forbids declaration of wxPoint with no type
k.cpp:12: error: expected , or ... before & token
[Code].....
Ubuntu :: Compiling And Updating Drivers
Jan 23, 2010I have a wifi card that has a generic driver through ubuntu that doesn't give it near the capabilities it has with another driver I found at another website. I compiled this driver myself and installed it, but after an update all effects of that driver seem to be gone.
View 5 Replies View RelatedUbuntu :: Error While Compiling Xchat
Jan 26, 2010I am compiling Xchat and when I was 'make install' I get this error and yes I am root.
Code:
make[2]: *** [fe-gtk.o] Error 1
make[2]: Leaving directory `/home/mark/build/xchat-2.8.6/src/fe-gtk'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/mark/build/xchat-2.8.6/src'
make: *** [install-recursive] Error 1
Ubuntu :: Compiling Libs Under A Different Directory
Feb 21, 2010I am fairly new to ubuntu. I have to compile some libraries under ubuntu in a directory other than the default directory and then get the shared object libs (.so) libs for building some custome kernels. I created a directory structure as follows:
/home/username/build-target
/home/username/src-<libname> =>here are the source files for the lib. I need to compile
Now I create a directory /home/username/src-openssl and download the source code and untar it under this directory and issue ./configure --prefix=/home/username/build-target --exec-prefix=/home/username/build-target and then make and make install. I was expecting that the shared object libraries created (.so) files should have gone under /home/username/build-target/libs, however I just see only libssl.a and libcrypto.a and not .so files under the build-target/lib directory. For grep also I did the same thing as above however I don't see any lib directory created under build-target directory as I was expecting.
Ubuntu :: Getting Error In Compiling RPC Program
Mar 22, 2010I am trying to compile a simple remote procedure call program. I am getting an error:
/tmp/ccy0M5rT.o: In function 'main':
rpchighlayer.c.text+0x5c): undefined reference to 'rnusers'
collect2: ld returned 1 exit status
Code:
#include <stdio.h>
#include<stdlib.h>
main(argc, argv)
int argc;
char **argv; {
int num;if (argc != 2) {
fprintf(stderr, "usage: rnusers hostname ");
exit(1);
} if ((num = rnusers(argv[1])) < 0)
{fprintf(stderr, "error: rnusers ");
exit(-1);
} printf("%d users on %s
", num, argv[1]);
exit(0); }
Ubuntu :: Beginner And Compiling Prgrams
Mar 25, 2010I am a beginner and would like to know how do you compile a program in ubuntu 9.10. I would like to compile freeorion but don't know where to start in compiling any sort of program. Any instructions would be most welcome.
View 3 Replies View RelatedUbuntu Installation :: Compiling Abgx360gui ?
Apr 18, 2010Im having problems when compiling abgx360gui. I compiled the abgx360 and it work but I want to compile the gui now, because otherwise it is very difficult to use it.
And when I try to compile it, the following happens.
Ubuntu :: Compiling A Custom 64 Bit Kernel With BFS?
Aug 1, 2010I would like to try and optimize my kernel a bit. Since I am doing this on a fresh install, I don't really care if the os gets bricked in the process, and I am sure I can bring it back if I can boot into a recovery console from the old kernel. So, I followed thispost. I patched it and copied and edited a config file from /boot/, saved it as .config, I tried it several times with both removing and not removing /debian and /debian.master directories from the source, yet I always get the same error when I run "make oldconfig".
Code:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*** Error during writing of the kernel configuration.
make[1]: *** [oldconfig] Error 1
[Code]...
Ubuntu :: Compiling For Multiple Architectures?
Aug 13, 2010I'm trying to compile some of the gnu utils (the version on some of the computers I work on are terribly out of date). The issue is that many machines share the same filesystem, and I'd like to not have a different executable for each machine. Anyways, I've read that
./configure CC="gcc -arch i686 -arch x86_64 " --prefix=/home/user/bin
should work. But of course it doesn't. apparently -arch is not an argument accepted by gcc.
Ubuntu :: Cross Compiling Software For Arm ?
Sep 20, 2010I am trying to cross compile a package from source for an embedded arm board, however I am not having much luck creating an arm binary.
After running make, this is what I get:
Ubuntu :: Compiling Old Version Of Avidemux?
Nov 20, 2010I'll try to make this short, esp because I don't know if this is the right place to discuss a 3rd party program like "Avidemux" I'm running the latest version "2.5.4" or so. It started giving me this problem where no matter what settings I give it, the resulting files are so small it results in an error after almost a day of encoding. ( "XYZ" was NOT saved correctly , for example.) One day I noticed the quantisizer was at max, peaking at 48-50...which made the files tiny. So, I can avoid this sort of, by limiting the maximum and minimum quantisizer in the configurations. Problem is, I have no control over target size or bitrate this way..and sometimes the results are still unplayable.
Naturally I've uninstalled and re-installed several times, and recompiled the x264 codecs using this guide: [URL]... So, I downloaded the Tar.gz of the previous version i was using (Avidemux 2.5.3), the last known thing I know that worked for me...but I have no idea how to install it. I've tried running "Make" / "Cmake" In which I was told that an "in-tree-build" was detected. And trying to run the included "bootStrap.sh" results in : "Permission denied" or file/command not found. I don't think their old releases come in the default Ubuntu/Unix package "deb" right?
All these could be small errors on my end, but It urks me. In between reading up, and everything else that needs to be done in a day, I could have been done by now... Does anyone know where i could be going wrong?
Ubuntu :: Compiling The OpenSceneGraph For FlightGear?
Mar 19, 2011I'm following the instructions here, to compile OpenSceneGraph that I got on DVDs purchased from Curtis Olsen. The instruction for this step goes like this.
Quote:
mkdir osg_build
cd osg_build
cmake -D CMAKE_BUILD_TYPE="Release" -D CMAKE_CXX_FLAGS="-O3 -march=native"
CMAKE_C_FLAGS="-O3 -march=native" -D CMAKE_INSTALL_PREFIXATH="/usr" ../src
[code]....
So, I try that, and I get the following.
Quote:
-- The C compiler identification is GNU
-- The CXX compiler identification is GNU
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
[code]...
Ubuntu :: Compiling Games From .tar.gz Files
Jul 20, 2011just need to know how i would do this, I've tried it before, and I've gotten the following error, no matter what i tried:
View 2 Replies View RelatedGeneral :: Compiling WxWidgets On Ubuntu 9.04?
Jul 28, 2009I did fine with Ubuntu 9.04 for a month and then things went wrong and I could no longer compile programs though others on the same distro could so I reinstalled Ubuntu 9.04.First step is to compile wxWidgets. Before this was automatic sudo make install libgtk2.0-dev, download wxGTK from wxWidgets then compile and make wxWidgets.Now I can't even do that, I get make errors every time and as soon as I resolve one. another shows. Widgets version 2-8-10 is the same as before. Does anyone know a current address for a tutorial getting widgets to compile with Ubuntu, I don't know whether to ask you, Ubuntu or Widgets (or understand what went wrong with Ubuntu in the first place.
View 6 Replies View Related