I'm trying to compile some of the gnu utils (the version on some of the computers I work on are terribly out of date). The issue is that many machines share the same filesystem, and I'd like to not have a different executable for each machine. Anyways, I've read that
./configure CC="gcc -arch i686 -arch x86_64 " --prefix=/home/user/bin
should work. But of course it doesn't. apparently -arch is not an argument accepted by gcc.
Is there a way I can compile for a different architecture on the same system? For example I am interested in compiling armel debs on a 64 bit Linux distro.
View 1 Replies View RelatedI have two amd64bit machines and one intel core2 duo laptop which I want to install ubuntu on. The problem is am not sure what I need pxelinux.cfg/default file. So far I have got it to boot pxelinux
include ubuntu-installer/i386/boot-screens/menu.cfg
include amd64/ubuntu-installer/amd64/boot-screens/menu.cfg
#default ubuntu-installer/i386/boot-screens/vesamenu.c32
prompt 60
timeout 60
but I can't see how I tell it to boot ubuntu 64bit installer instead of i386 one.
compiling and linking using gcc: What does a file name with a suffix '.a' represent? If I have multiple .c and .h files, how can I link them together? How can I create the .a file?
View 6 Replies View RelatedCode:
anisha@linux-uitj:~/junk> ls -R
.:
include src
./include:
template0.h template0.h~ template0.h.gch
[code]....
I have 3 c++ files, classdef.h (header file with class definition), methods.cpp (class methods) and program.cpp - the program itself. Both .cpp files have
Code:
#include "classdef.h"
in files. How I can link the files together and compile them in one executable program? I am using Geany IDE for coding.
We are working on a project to create a display wall of 8 monitors arranged as 2 high by 4 wide. Each monitor is connected to a single machine and all machines are networked with a master machine with its own, seperate monitor.
Our goal is to get the 8 machines to share a single desktop, with the master machine acting as the server. We have looked at using Xinerama or NMM, but we are unsure about how to get started configuring the multi-machine, multi-head display.
My ubuntu 10.04 has two monitors connected both being treated as individual desktops.But only one desktop is showing the wifi network icon in the notification area.Is it possible to have more than one wifi icon going at one time?
View 1 Replies View RelatedI'm using Ubuntu 10. I want to apply different themes for desktops.. I want to apply windows 7 theme,ubuntu, mac os themes for my multiple desktops
View 1 Replies View Relatedhave a large amount of 7z files in multiple folders which I need to extract.The directory structure is like this:
/main-folder/
multiple subfolders/
1 or more 7z files per subfolder
I would like to get the output of this action in one separate folder, all together in 1 folder.How can I do this?
I often use the rpl command to make changes to multiple html files at once. For example:
rpl -R '<br />' '<br /><br />' mydirectory However, I haven't been able to figure out how to change multiple lines. For example, let's say I want to change all occurrences of :
<br />
<br />
to:
<br />
I've tried
rpl -R '<br />
<br />' '<br />' mydirectory
but that didn't work. how to do this with rpl or some other way?
I'm trying to connect one computer to two others in an ad-hoc infrastructure.
[computer 1] ---- [computer 2] ---- [computer 3]
computer 2 is running Linux and has a single NIC wlan0. I want to it to connect to both computer 1 and computer 3 so each computer can talk to the other. No switch is available so it needs to be an ad-hoc setup.
[Code]...
I am to rename all the files within a directory (which contains multiple subdirectories) recursively without invalid characters.
I tried the coding posted above.
find . -type f -printf '%p
' | while read file; do
oldfile=$(basename "$file")
newfile=$(echo "$oldfile" | sed 's/[^A-Za-z0-9_.]/_/g')
if [ ! "$newfile" == "$oldfile" ]; then
echo mv "$file" "${file%$oldfile}$newfile"
code....
but I get an error on both of them stating "find: bad option -printf find: [-H | -L] path-list predicate-list"
So essentially, I have 3 monitors and i'm attempting to run 2 different window managers/sessions at once split up on the monitors. It is intended to be like this:
Code:
[GNOME/Compiz - Screen0]
- Left Monitor[code]......
I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminals in my Linux workstation.Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea).I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example.
My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. All the tutorials I read (like this one) only tells how to use multiple monitors but doesn't answer my question about keyboard shortcuts.Does Linux (Ubuntu 10.04 Lucid Lynx or Debian 5.0.5 Lenny) support this envisioned setup (Different workspaces in a way that keyboard workspace switching only works in the current monitor) ? If so, how?I haven't tested this setup, that's why I'm asking. In this question the user says it works exactly how I want it to behave, can someone else confirm it?
I have an old pentium 3 computer that has ~7 NICs installed. These NICs are attached to modems and other networking equipment. According to the linux ping page on computerhope.com, it seems that one could send a ping from a certain specified NIC. How would one go about this?
View 6 Replies View RelatedI'm looking at setting up a couple automated systems: Here are a few examples:
* Internal accounting system to download and process emails
* Public web server to visit
I could put each system on its own separate box -- for example, it's generally good practice to separate anything that external users have access to (such as a webserver) from internal processes such as accounting. Now, rather than dishing out the money for two separate servers, could I get away with just installing new instances of VMWare on the same box for each system?
To give you an idea, these are not large scale computationally sensitive systems. The accounting one is simply downloading and tallying emails, and the latter is just a webserver with maybe 5 hits per day on a good day. I could definitely pick up a new box for say $50, but I wanted to know the general practice of using VMWare on the same box versus two separate boxes.
How to search multiple words in multiple lines, inside a directory including sub-directory? Pls. give easy example. I want to search the files (in /xx folder and all subfolders) that have header.h included and used x() function. I tried $grep -r "header.h" | grep -r "x(" /Folder/subfolder/ > search.log
View 7 Replies View RelatedI have a CentOS 5.3 box with three network interfaces in it. Each interface is attached to a separate VLAN and I want traffic to stay on each network segment.What I can�t figure out is why I cannot get each interface to have its own gateway and everything gets sent through the default gateway.The basically takes my possible 3Gb total bandwidth and throws it down a single 1Gb pipe.Then on top of that, if I take down the interface (ifdown) that has the current default gateway,I loose contact to the other two interfaces.When I look at the routes, each one of the interfaces shows the gw as 0.0.0.0 and defers to the default route. So I delete the route and try to add a new route with:
[root@testsan ~]# ip route add 10.1.15.0/24 via 10.1.15.1 dev eth2
but end up with the error:
RTNETLINK answers: Network is unreachable
[root@testsan sysconfig]# cat network
NETWORKING=yes
NETWORKING_IPV6=no[code].....
I have tried several times, but compiling always fails.I want to compile a litte program called dwg2dxf.I think all the needed programs are installed.First I unpack the tar.gz file on my desktop. Open Terminal, enter directory, then type"./configure"Everything fine, some files are created. config.log doesnt show errors (See config.log file)."make"Some errors occurenters some directories without doing anything, thenmain.cpp:39: fatal error: iostream.h: (translation) Doesnt exist.This is the text from the terminal:
familia@familia-laptop:~/Escritorio/dwg2dxf-2.1$ make
make all-recursive
make[1]: se ingresa al directorio /home/familia/Escritorio/dwg2dxf-2.1
[code]...
so I am wanting to compile my own kernel to see if i can get my laptop to run a lill better. I found the how too's to do the compile, but what I want to know is.. what is the most complete way to find all the hardware and such that is in my laptop so i can build all the support into the kernel that i need and leave out EVERYTHING i dont need.
i figured lspci is a start but there has to be more info somewhere to find the exact needs of the laptop.
I went from mandriva 2009 32-bit to ubuntu 9.10 64-bit and wx begins to act up..
the simple program from the wx hello world tutorial build fine on my old system, but not my new on. I got the packages installed (wx2.8.10-dev, headers and whatnot)
I've looked around a bit and it seems the compiler is not including the files correctly..
Compiler command:
Code:
g++ k.cpp `wx-config --libs` `wx-config --cxxflags` -o morten
Compiler output sample (because most of it is because of first errors):
Code:
k.cpp:9: error: invalid use of incomplete type struct wxFrame
/usr/include/wx-2.8/wx/utils.h:50: error: forward declaration of struct wxFrame
k.cpp:12: error: ISO C++ forbids declaration of wxPoint with no type
k.cpp:12: error: expected , or ... before & token
[Code].....
I have a wifi card that has a generic driver through ubuntu that doesn't give it near the capabilities it has with another driver I found at another website. I compiled this driver myself and installed it, but after an update all effects of that driver seem to be gone.
View 5 Replies View RelatedI am compiling Xchat and when I was 'make install' I get this error and yes I am root.
Code:
make[2]: *** [fe-gtk.o] Error 1
make[2]: Leaving directory `/home/mark/build/xchat-2.8.6/src/fe-gtk'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/home/mark/build/xchat-2.8.6/src'
make: *** [install-recursive] Error 1
I am fairly new to ubuntu. I have to compile some libraries under ubuntu in a directory other than the default directory and then get the shared object libs (.so) libs for building some custome kernels. I created a directory structure as follows:
/home/username/build-target
/home/username/src-<libname> =>here are the source files for the lib. I need to compile
Now I create a directory /home/username/src-openssl and download the source code and untar it under this directory and issue ./configure --prefix=/home/username/build-target --exec-prefix=/home/username/build-target and then make and make install. I was expecting that the shared object libraries created (.so) files should have gone under /home/username/build-target/libs, however I just see only libssl.a and libcrypto.a and not .so files under the build-target/lib directory. For grep also I did the same thing as above however I don't see any lib directory created under build-target directory as I was expecting.
I am trying to compile a simple remote procedure call program. I am getting an error:
/tmp/ccy0M5rT.o: In function 'main':
rpchighlayer.c.text+0x5c): undefined reference to 'rnusers'
collect2: ld returned 1 exit status
Code:
#include <stdio.h>
#include<stdlib.h>
main(argc, argv)
int argc;
char **argv; {
int num;if (argc != 2) {
fprintf(stderr, "usage: rnusers hostname ");
exit(1);
} if ((num = rnusers(argv[1])) < 0)
{fprintf(stderr, "error: rnusers ");
exit(-1);
} printf("%d users on %s
", num, argv[1]);
exit(0); }
I am a beginner and would like to know how do you compile a program in ubuntu 9.10. I would like to compile freeorion but don't know where to start in compiling any sort of program. Any instructions would be most welcome.
View 3 Replies View RelatedIm having problems when compiling abgx360gui. I compiled the abgx360 and it work but I want to compile the gui now, because otherwise it is very difficult to use it.
And when I try to compile it, the following happens.
I would like to try and optimize my kernel a bit. Since I am doing this on a fresh install, I don't really care if the os gets bricked in the process, and I am sure I can bring it back if I can boot into a recovery console from the old kernel. So, I followed thispost. I patched it and copied and edited a config file from /boot/, saved it as .config, I tried it several times with both removing and not removing /debian and /debian.master directories from the source, yet I always get the same error when I run "make oldconfig".
Code:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*** Error during writing of the kernel configuration.
make[1]: *** [oldconfig] Error 1
[Code]...
I am trying to cross compile a package from source for an embedded arm board, however I am not having much luck creating an arm binary.
After running make, this is what I get:
