I have installed SDL_gfx, configured, compiled and installed perfectly fine, then I ran ldconfig, and yet I get an error from the install scrip of Lincity, complaining that I'm missing SDL_gfx -- I've read all the READMEs and INSTALLs for each, yet I can't see what I've missed.What do I need to do to make Lincity configure properly prior to compiling?
View 7 RepliesWhen I do #./pdfedit.SlackBuil I get the information in the terminal:
[Code]...
Whether we want to checking PDFedit prepare-core-dev package ... yes Whether we want to checking build PDFedit gui ... yes configure: error: QTDIR environment variable must Be Set
A snapshot of my existing partion configuration can be viewed at: [URL] I intend for the space including /dev/sda1,dev/sda2 and /dev/sda3 to be used by slack 13.0. The OS at /dev/sda6 and /dev/sda7 will be "retired" once I get slack up, running and configuration for my work. In the past I have preformatted partitions, that is, from the existing OS, I have formatted partitions for use by the next OS, using gparted. In the case of ubuntu, that has worked well. And frankly, I'm pretty rusty with fdisk....
1)Is there any advantage - or disadvantage - in my doing this for my pending slackware installation? Will slack recognize the "clean" partition and opt to skip formatting?
2)I presume that slack will recognize the existing swap partition. Am I correct?
3)My scheme would be to provide separate partions for /, /home/ and /usr or /usr/local.
4)Any recommendations on filesystems?
A C program which compiled well in Dev CPP compiler is not compiling in Linux-Fedora.It shows the following error message/tmp/ccy02C6e.o.eh_frame+0x12):undefined reference to '__gxx_personality_v0'collect2:ld returned 1 exit status
View 2 Replies View RelatedNow to business. I need to statically build openssh-5.8p1 and the compile fails. some box information: CentOS release 5.5 (Final) arch i686
first thing's first. Quote:yum groupinstall "Development Tools" "Development Libraries"
I have this problem constantly and it tells me to install such and so a prog, but I do locate [prog] and it shows up in 80 places so it's obviously installed. I just have no clue how to attach the two or to set up anything in the ./config set up so it leaves me completely stuck. So what's the trick when it's already in there? Also..it says I just joined? in 2008.
View 5 Replies View RelatedI bought a new laptop HP Pavillion dv3-4170ee that has Core i5 2.53ghz dual core with hyper threading, intel hd graphics and Ati Radeon HD 5470 512 mb dedicated. It came with windows 7 64bit. It also has 6 gb ram(2gb in first slot + 4 gb in the second one).I installed slackware 13.37 64 bit. It installed just fine. installed lilo onto mbr. When it boots up it shows the slackware screen. I am able to boot into windows just fine. When I select Linux it boots into linux bios data check successful. lots of stuff goes on the screen the normal linux boot stuff. and then it goes to the next screen and stays blank
Nothing happens and even the hard disk light is not blinking.By the way the HDD is Western Digital.
How do I compile oci8 and php 5.3.6 in centos 5.5, I want to make use of oracle-xe 10g
View 1 Replies View RelatedI've gone through some online tutorial on how to create a MAKE file and actually I don't have a complete understanding of it specifically, linking the particular compiling program to a library and also creating a share/dynamic library.
View 4 Replies View RelatedI am trying to compile systemc. Configuration is done OK and Makefiles are created. As soon as the "make" command i issue, recursively reaches the "utils" directory, errors are produced -declaration and include errors.
The files referenced by the errors DO exist and i hava managed to give g++ "-I ${LD_INCLUDE_PATH}, ie the variable, where all header dirs are listed. Libraries and compilers for gcc3.3 and g++3.3, i believe, are installed OK. code...
I just installed Ubuntu this afternoon, and it has been working perfectly until i tried to install the flash plugin. My laptop froze and i had to unplug it to restart. Since then, whenever i try to log on, an error message appears saying that Gnome Communications (? i think thats what it said) center didn't configure properly and to contact the computer administrator.
View 2 Replies View RelatedI am using a reverse proxy on Debian Lenny and using apache2.
I have a site
Code:
And a site
Code:
Two files in
Code:
Code:
But the problem is [url]and [url]are both pointing to [url] I am unable to find why.I do not want to touch apache2.conf so want to go by having a VirtualHost site1.[url]
I am running Debian 6 & picked up a wireless nic for my desktop since I want to locate it in an area that would be a challenge to wire. I downloaded the driver and ran make and got the strange error below. I tried doing some web research but could not find anything. I also booted up the machine w/ a Ubuntu Live disk to ensure the card was good and found no issues ( I also have the same nic in my kids machine running Ubuntu 10.10. )
[code]...
I have problem with compiling server... I finish ./configure without any problem, and now, when I write make, I see that: Quote: Makefile:360: *** missing separator. Stop. I read something, and know, that error shows when there are problem with spaces. And I should use there a tab. On line 360 I have:
Code: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/account.Po@am__quote@ I try to change this one space inside to tab, but that doesnt work for me... Terminal always show error in the same line.
I am using CentOS 5.5 and have installed PowerDNS with MySQL backend. I have Apache and PHP installed and I'm using PowerAdmin to create the master zone.I have tried to configure the zone to resolve my domain name and I have had no success.I've googled and read tutorials and have tried suggested methods, but it's still not working.This is a new adventure for me and I would like to be able to host a site from my home for experimental purposes. I am a mature (read OLD) student enrolled in Networking and have done some units in Web Design (though I'm not very good at it).
View 7 Replies View RelatedI have a need to recompile mesa. The --enable-32-bit option falls over every header and basic 32 bit lib, and won't compile. But if I try to install 32 bit packages, I could slap a 32 bit binary straight on top of my 64 bit one. What's the accepted way of doing this? I can't seem to find a package in Slackware 13.0
View 9 Replies View Relatedi try to compile freej on slackware 13.1 the problem is with ffmpeg >= 0.6 i have this error
Quote:
In file included from /usr/include/libavutil/avutil.h:81,
from /usr/include/ffmpeg/avcodec.h:30,
from ../src/include/video_layer.h:22,
from ../src/include/impl_layers.h:48,
[code]....
I've installed glibc and downloaded 2.6.33.3 tar ball from kernel.org.
I created a symlink /usr/src/linux -> /drive/linux-2.6.33.3
But there's something missing because when I run
make mrproper
make config
I get errors about not finding headers:
asm/socket.h
It seems like I am missing some other symlink, I've tried creating other links, like /usr/include/asm -> /drive/linux-2.6.33.3/arch/x86/asm
I'm running 13.1 64bit with alienbob's multilib extension and want to add openmotif. I used Eric's Slackbuild from [URL] applying it to openmotif-2.3.3 and succeeded in compiling the 64bit-version.Next I tried to compile in 32bit-mode, following alienbob instructions:
move lib64 to lib in openmotif.Slackbuild
export ARCH=x86_64
. /etc/profile.d/32dev.sh
./openmotif.Slackbuild
linking stops with error-message
Quote:
/usr/lib64/gcc/x86_64-slackware-linux/4.4.4/../../../../lib/crt1.o: In function `_start':
/glibc-tmp-88b9835d8519e3638ef4d116a6932cb2/glibc-2.11.1/csu/../sysdeps/i386/elf/start.S:115: undefined reference to `main'
collect2: ld returned 1 exit status
Specifically, where does /usr/lib64/gcc/ come from?
Having trouble compiling the regular par2cmdline-0.4, I stumbled upon [URL] modified version of par2cmdline-0.4 with tbb which allows for concurrent processing of files. I have tried compiling this with no luck on my system and was wondering if anyone has had any luck. The ./configure goes through fine, and tbb is detected and used however it craps out just moments after issuing the make command. I have tried both tbb 2.2 and 3.0, but to no avail.
View 6 Replies View RelatedCode:
putty-0.60/unix$ make -f Makefile.gtk
cc -O2 -Wall -Werror -g -I.././ -I../charset/ -I../windows/ -I../unix/ -I../mac/ -I../macosx/ `gtk-config --cflags` -D _FILE_OFFSET_BITS=64 -c ../be_all_s.c
cc -O2 -Wall -Werror -g -I.././ -I../charset/ -I../windows/ -I../unix/ -I../mac/ -I../macosx/ `gtk-config --cflags` -D _FILE_OFFSET_BITS=64 -c ../cmdline.c
[code]....
When I compile evince from its source code, I am able to run ./configure properly, but when I run make the following output is displayed.
Code:
make all-recursive
make[1]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0'
Making all in cut-n-paste
make[2]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste'
Making all in zoom-control
make[3]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste/zoom-control' .....
make[3]: *** [libevview.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
I am not able to ascertain the source of this error, even though I seem to have the file in question-libevdocument.la. What do I do now to remove this error?
I'm having problems configuring my virtual hosts file properly The site [URL]... opens on http and https The site 10.0.1.3/myapp/ works
I am trying to redirect all traffic from [URL].... to [URL].... while maintaining access to [URL]....
[Code]....
recently I'm working with one of these... LM-PC001
it works via /dev/input/event4, so I'm using devinput driver for lirc, the thing is, it works flawlessy when lirc is not running, (via linux-input-layer) but I do need to make it work with lirc...
I can make work almost everything using this lircd.conf (incomplete here)
Code:
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
[Code]...
First thing, it doesn't show the header (not a problem really) but as you can see the bits that differ the direction on the axis is the latter ones, and lirc is not taking them into account so both buttons result in the same direction...
Is there a way that i can make lirc take them into account?
also irrecord doesn't work because of the "0x40004" header, all comands, are detected as "0x400004"...
and since it uses devinput driver, mode2 says "This program doesn't work for this hardware yet."
I'm compiling the BlueZ packages on Slackware64-13.0 and bluez.Slackbuild failed to run. I added
Code:
mkdir -p $PKG/lib/udev
immediately before
Code:
cp -a scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
and now the script runs.I don't know why the /lib/udev directory isn't created earlier in the build process for me, but now it builds cleanly.
Im trying to recompile glibc from a working slackware-current system using source from a slackware mirror. I'm doing it for testing purpose only. Never done that before, so i'm not sure if i'm doing it right. I get the following error:
Code:
make[2]: Entering directory `/glibc-tmp-a44be92860d34519b0c9a4500878e2e6/glibc-2.11.1/iconvdata'
../Makeconfig:85: ../i486/config.make: No such file or directory
/bin/sh: line 0: cd: ../i486: No such file or directory
The GNU C library has not been configured.
[code].....
I'm trying to compile imlib against libpng 1.4. I am using the slack sources from slackware64 13.1, and a SlackBuild file modified with the extra configure parameter "--with-png=/usr/lib64/libpng.so.14"
The final crashing portion of my output is as follows:
Code:
/bin/sh ../libtool --mode=install /usr/bin/ginstall -c libimlib-jpeg.la /tmp/package-imlib/usr/lib64/libimlib-jpeg.la
libtool: install: warning: relinking `libimlib-jpeg.la'
(cd /tmp/imlib-1.9.15/gdk_imlib; /bin/sh ../libtool --mode=relink gcc -O2 -fPIC -fPIC -o libimlib-jpeg.la -rpath /usr/lib64 -avoid-version -module io-jpeg.lo -ljpeg libgdk_imlib.la -inst-prefix-dir /tmp/package-imlib)
[Code]....
I'm trying to build some boot and kernel images for my WD Mybook world edition, which uses an arm processor on my x86_64 host box. Ultimately i'd like to install slackarm. Lilo doesn't work on arm so you have to compile your own kernel and have the bootloader statically linked to kernel inorder to boot the OS. So i'm using my slackware install to cross compile the boot loaders (u-boot) and kernel image (uImage).
I've successfully compiled the buildroot environment which has generated the arm-linux-* binaries, eg, gcc 3.4.2 for arm.
Code:
These are in a build folder (shortened in text below), which i add to my PATH
Code:
I then move to the directory where i want to build the stage1 boot loader, which is supplied in the GPL code from WD.
Code:
However the build fails with a segfault, which looks to be caused by the incorrect libraries and compiler being used:
Code:
It seems to be using my x86_64 libs and gcc 4.4.4 which is the host compiler not the target.
I've tried setting ARCH=arm but got the same results.
Do i need to export some additional variables or unset some to prevent the host files being used instead of the targets?
I em trying to compile fop-1.0 on Slackware64 13.1. I have ant 1.8.1 Slackware package.
Here is the output of ant build:
Code:
I'm trying to install squidGuard-1.4, I have a minimal install. I have installed squid-3.2.0.5 without any problems, but squidGuard is driving me crazy
I can run the ./configure with no problems but when I run make, or make install I keep getting this error:
Code:
make: *** [y.tab.c] Error 141
And that is is all, no more verbosity or anything else.
Error suggests that YACC is missing but bison is present, also db4 (tried with db44 and db3, same story).
Just in case you can see anything I cannot I've attached the config.log