Ubuntu :: Command Prompt Appears Instead Of Gui?
May 16, 2010When i boot to ubuntu 10.04 lts. command prompt appears instead of gui interface is this a bug. I had made a new installation of ubuntu 10.04 lts 64 bit.
View 1 Replies
ADVERTISEMENT
Ubuntu Installation :: Grub Cmd Prompt Appears On Boot?
May 11, 2010Two days ago I decided to migrate from Fedora to Ubuntu 10.04. On the Ubuntu install I chose to format the entire disk as I do not want a dual boot system. I have three disks and have set the bios to boot from dvd, then main disk, then 2nd disk, then any other bootable drive and coming from a working Fedora I know I have my "slaves" and "Master" pin positions on the disks set correctly.
When I try to boot the fresh install of Ubuntu I do not see any menu options, no boot image nothing, I get taken immediately to a grub command window and I dont know how to fix things from there. I have tried to fix things by booting into the "try before you 'buy'" thing on the installation cd and I can see that Ubuntu has been installed on the main disk, but all in all Im stuck.
Red Hat :: Command Line Prompt But Not The Correct Bash Prompt?
Feb 2, 2011I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt).I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller.
View 6 Replies View RelatedUbuntu :: Grub Prompt Appears After Update-grub?
May 6, 2011After certain system-wide changes, like kernels updates, I obtain grub prompt on restart. However, if I put the hard drive into another computer (b), it boots up fine. Since, however, I use the present computer (a) regularly, I only use b to purge and reinstall grub using the chroot method. However, doing so every time is time consuming; and I cannot change anything in the defaults and run update-grub without obtaining a grub prompt on restart. How do I fix this?
View 9 Replies View RelatedUbuntu :: Setup Command Not Found In 10.04 Command Prompt?
May 6, 2010In Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies View RelatedUbuntu :: GRUB Command Line Appears On Start Up. YIKES?
Feb 14, 2010I just booted into Linux and the Update Manager prompted me to restart. After the restart the GRUB interface I expect to see is no longer there and now it is just a command line that says press tab for more options.I have not got a clue with shell language as I have had no time to learn it as of yet. Do I need to uninstall and reinstall Linux or is there a command that can be typed that boots up the operating system.Even better is there something I can do that can return me to seeing the interface like I was used to.
View 3 Replies View RelatedUbuntu :: When Turn On The Computer, The GRUB Menu Appears, Press Enter, Then A Little Flashing Underscore Appears On The Screen?
Dec 21, 2010I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
View 1 Replies View RelatedUbuntu :: Creating A New Command Prompt?
Feb 6, 2010Is it possible to create a new command prompt in Ubuntu? I have a assignment and I don't fully understand it. I have to make c files and then open them in the command prompt. Would this happen in a new command prompt or I'd have to use the already existing one? Is this even possible?
View 4 Replies View RelatedUbuntu :: Get To The Gui From The Command Line Prompt?
Jun 5, 2010Is there a way to get to the gui from the command line prompt? I am using Ubuntu 8.04, my computer us telling me there is an error and will only boot to the cli not gui.
View 1 Replies View RelatedUbuntu :: 10.10 Boots Only To The Command Prompt?
Oct 13, 2010I just upgraded my desktop to 10.10. All seemed to go fine. The computer then prompted for a reboot, and on rebooting it boots to the shell prompt.
View 6 Replies View RelatedUbuntu :: How To Edit In A Command Prompt
Dec 18, 2010i somehow managed to mess up my install of 10.10 I used the alternate AMD 64 install so now when I login it is only a text prompt. This leads me to believe that I am running in Ubuntu Server. I read this article:
[URL] but my network is not setup!! So I tried to do this: [URL] but when I get to:
Code:
sudo vi /etc/network/interfaces
I dont realy know how to edit the file.I basicaly see
Code:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
Ubuntu :: Damaged Hard Drive And Interrupted Update - Message Appears When Run Command Is Added Then Freezes
Apr 10, 2010A section of the hard drive on my laptop is damaged but the laptop has genearlly been running fine as it seems to very rarely touch that section (once every few months). However, when installing some updates the computer has hit that section which means it becomes unresponsive and makes a nasty clunking sound every 10s or so. Because of this I've had to abort the update but now whenever I try to run 'dpkg --configure -a' to sort out the problem caused by the interrupted update I get the same freezing up and clunking. The message that appears when I run the command is adding extension /usr/lib/openoffice/basis3.0/program/mailmerge.py... and then it freezes.
View 2 Replies View RelatedUbuntu :: Command Line Prompt Available On The Desktop?
Mar 27, 2010is it possible to have a command line prompt available on the desktop, operating sort of like conky?
View 5 Replies View RelatedUbuntu :: When Login Via Ssh To A Server Only A $ At The Command Prompt
Aug 13, 2010I'm getting some weird behavior when I log in via ssh to a ubuntu server. When I log in, there is only a $ at the command prompt, no user name. The arrows don't work, they just put the arrow characters in the prompt. Everything else seems to be ok. Also, when I say logged in as User, I meant a new user I just created.
View 2 Replies View RelatedUbuntu Installation :: Only Get Command Prompt After Upgrade?
Oct 17, 2010After upgrade to 10.10, I only get the command prompt. Fortunately, all my XP Pro machines are running, and I am using one of them to access this Forum. I suspect that nVidia graphics driver did not load correctly. running startx at the command line gives numerous lines of text apparently understandable xorg gurus. It looks like nvidia_drv.so did not load and module "nvidia" did not load [loader failed, 7] and next line says no drivers loaded.
View 4 Replies View RelatedUbuntu :: Open Terminal From Command Prompt?
Oct 29, 2010I want to open another terminal from typing a command to one terminal.
can anyone tell me a command for this..
Ubuntu Servers :: Not Giving Command Prompt
Feb 28, 2011I have a pretty fresh install on Ubuntu 10.10 Server, with the LAMP bundle installed. Anyway, I just restarted the computer after changing the /etc/network/interfaces script to connect via dhcp. Now when I boot into the server, there is no command prompt and seems to hang there forever, with one blinking cursor in the top left hand corner of the screen. It will not respond to any input besides ctrl-alt-delete. I was able to press control-alt-delete and the computer automatically restarted itself, but it returns to the same state after each reboot. I booted from the grub menu into recovery mode and made sure the /etc/network/interfaces script was correct, and it is. Also I don't think an error in this file should cause the computer to not boot into the command prompt.
View 5 Replies View RelatedUbuntu :: Running A Command In The Alt+F2 Prompt Possible In Bash Scripts?
Jan 5, 2010Is running a command in the Alt+F2 prompt possible in a bash script?I need this for a launcher for gnome-shell.For it I have written a little script to check if the process gnome-shell is alive and act accordingly.The script works fine, I just don't know how to write "debugexit" to the Alt+F2 prompt, as that is the only decent way I have found to shut gnome-shell down and going back to gdm desktop smoothly.
View 1 Replies View RelatedUbuntu :: Different Results When Running In Command Prompt And Via Script?
May 26, 2010i wonder if it is usual that the results of running commands via the command line is different from running them in a script file. my problem is that, i've to run 'modprobe -r e100' and 'modprobe e100' before suspend my machine via pmi in order to resume it properly. i wrote a script containg EXACTLY the same commands as i typed in the terminal/console but the result was not the same. the machine cannot be resumed as expected if i run the script file.
View 2 Replies View RelatedUbuntu Servers :: 'screen' Command Produces No Prompt
Sep 8, 2010I am using Ubuntu 9.04 Server. I use screen alot for persistant sessions and suddenly I have a problem. When I type Code: screen -R -DD as usual, I get into screen but there is no command prompt. There is a cursor and I can type commands which work, eg ls. However I don't know which directory I am in, so it makes using it rather hard.
View 9 Replies View RelatedUbuntu :: Unable To Install GUI - Restarted Into Command Prompt
Dec 1, 2010Installed OS, it told me I should install nVidia drivers. I told it to go ahead, it told me to restart - I did. I restart into a command prompt... No GUI. Turn off PC, on again, still - same thing. Asks me to login, but no GUI.
View 4 Replies View RelatedUbuntu :: Find Drives To Mount From Command Prompt?
Mar 18, 2010So, I plugged in two hard drives to my server. I started with two, an IDE and an SATA. Then I plugged in another SATA and an external SATA using a PCI controller card.
I currently only have command prompt (Putty) access. How can I set the drives up to be usable. They were on another server that died.
Ubuntu :: Command Prompt On Startup After Installing Freevo?
Jun 6, 2010I've just done a clean install of Ubuntu 10.04 and installed Freevo on it from the Medibuntu repositories. After rebooting I get a shell window with no frame in the top-left corner of the screen with the Ubuntu loading screen still taking up the rest of the screen. Typing 'startx' gave a error that there is already a display running on the port.
View 2 Replies View RelatedDebian :: How To Go To Command Prompt And Update
Jun 12, 2011I am new to linux. I have mounted debian on vmware. Now I would like to get the updates on linux on the desktop all I can see it computer, my home, and trash icons. How can I get the updates. How can I go to command prompt.
View 9 Replies View RelatedGeneral :: How To Use Command Prompt To Open Them
Sep 6, 2010After contracting malware on Vista i decided to switch over to Linux and chose to start of with Ubuntu because of the graphical interface. that being said, you have no doubt inferred that i have no coding experience. basically i was hoping to find some nice tutorials and sites for Ubuntu. Also, i did downloaded the suggested programs and patches but im still experiencing problems with Adobe,flash, and and opening .exe files. for the latter, when i click on .exe files it is equivalent of using explorer on windows so i was wondering how to use the command prompt to open them. supposedly linux is susceptible to malware so if you could please suggest a anti -malware program.
View 14 Replies View RelatedServer :: Add Another IP On The Same LAN Interface Using Command Prompt?
Apr 30, 2009See, I am trying to run multiple website from, different IP. I have only one lan card. I have more IPS. I want to add many ips on same lan card from commnad prompt.
View 6 Replies View RelatedSoftware :: Command Prompt Screen
Nov 14, 2010Okay I am curious if anyone knows how to get this screen? I remember having it a while ago before I had to go to windows, and now that I am going back to Linux I would LOVE to have this screen back! I enclosed a screen shot picture. I think its way better than just a blinking cursor.
View 14 Replies View RelatedSoftware :: Run Oracle In Command Prompt?
Apr 27, 2010I'm using rhel5 and i've installed oracle 10g in it. I've followed all the steps and i configured it successfully. In applications i'm not getting the sql symbol in graphical.I dont know how to run oracle in command prompt
View 3 Replies View RelatedUbuntu :: Get Boot To Command Prompt Option At Login Screen?
May 14, 2010I know there is a way to do this... What do I need to install to give me this option from the login screen?
View 2 Replies View RelatedUbuntu :: Low Latency And Realtime Kernels Boot To A Command Prompt?
Oct 12, 2010I just installed Maverick Studio on a new hard drive, and am using an NVIDIA GeForce 7300 LE GPU. If I boot into the 2.6.35-22-generic kernel, everything runs fine, but if I try to boot into either the 2.6.35-20-Low Latency, or 2.6.33-29-Realtime kernels (installed from Synaptic), the computer boots straight to a command prompt instead of the desktop. Does anybody know what causes this? I need to be able to use one of these kernels for doing music production.
View 1 Replies View Related