I'm using rhel5 and i've installed oracle 10g in it. I've followed all the steps and i configured it successfully. In applications i'm not getting the sql symbol in graphical.I dont know how to run oracle in command prompt
View 3 RepliesI've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt).I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller.
View 6 Replies View RelatedIn Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies View RelatedHow can I corrupt oracle data block manually using dd command from Linux?
View 2 Replies View RelatedI'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedHow to install oracle? I have been tried many times but seems can't resolve the DISPLAY issues.
All installer requirements met.
Use the following command to view the current DISPLAY environment variable setting:
I am new to linux. I have mounted debian on vmware. Now I would like to get the updates on linux on the desktop all I can see it computer, my home, and trash icons. How can I get the updates. How can I go to command prompt.
View 9 Replies View RelatedIs it possible to create a new command prompt in Ubuntu? I have a assignment and I don't fully understand it. I have to make c files and then open them in the command prompt. Would this happen in a new command prompt or I'd have to use the already existing one? Is this even possible?
View 4 Replies View RelatedWhen i boot to ubuntu 10.04 lts. command prompt appears instead of gui interface is this a bug. I had made a new installation of ubuntu 10.04 lts 64 bit.
View 1 Replies View RelatedIs there a way to get to the gui from the command line prompt? I am using Ubuntu 8.04, my computer us telling me there is an error and will only boot to the cli not gui.
View 1 Replies View RelatedI just upgraded my desktop to 10.10. All seemed to go fine. The computer then prompted for a reboot, and on rebooting it boots to the shell prompt.
View 6 Replies View Relatedi somehow managed to mess up my install of 10.10 I used the alternate AMD 64 install so now when I login it is only a text prompt. This leads me to believe that I am running in Ubuntu Server. I read this article:
[URL] but my network is not setup!! So I tried to do this: [URL] but when I get to:
Code:
sudo vi /etc/network/interfaces
I dont realy know how to edit the file.I basicaly see
Code:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
After contracting malware on Vista i decided to switch over to Linux and chose to start of with Ubuntu because of the graphical interface. that being said, you have no doubt inferred that i have no coding experience. basically i was hoping to find some nice tutorials and sites for Ubuntu. Also, i did downloaded the suggested programs and patches but im still experiencing problems with Adobe,flash, and and opening .exe files. for the latter, when i click on .exe files it is equivalent of using explorer on windows so i was wondering how to use the command prompt to open them. supposedly linux is susceptible to malware so if you could please suggest a anti -malware program.
View 14 Replies View RelatedSee, I am trying to run multiple website from, different IP. I have only one lan card. I have more IPS. I want to add many ips on same lan card from commnad prompt.
View 6 Replies View RelatedOkay I am curious if anyone knows how to get this screen? I remember having it a while ago before I had to go to windows, and now that I am going back to Linux I would LOVE to have this screen back! I enclosed a screen shot picture. I think its way better than just a blinking cursor.
View 14 Replies View RelatedIve just done a fresh install of F13, after an install of AMD Cat 10.7 screwed up my system.Although everything works, ive just noticed that when I open a terminal, instead of my username prompt, I now have "bash-4.1$".Firstly is this a problem? and if so how can I get my normal prompt back?
View 4 Replies View RelatedI was deleting some space off my C Drive and I believe I may of accidentally deleted Fedora, or some of it! I have a dual boot with Fedora and Windows XP so when I started my desktop up it would load into fedora by default or I could press a key to load XP! (It rhymes!) Now, however, it instantly loads up into "Grub"
And that's it! Run, Or Exit, or anything really, doesn't work! Except Reboot! So I'm a little stuck. It's an old PC and the Windows XP disc is long gone, if I ever had one! I had this thought that perhaps if I reinstall Fedora from a CD it many bring back the old command prompt and let me get back into XP again? Or, is that crazy talk??
how to get to the command prompt during start up of KDE. Which button(s) do I have to press?
View 9 Replies View RelatedComputer: Toshiba Satellite A505D laptop
OS: Suse 11.2, installed from Linux Pro Magazine disc -- was running fine after formatted install (dumped Vista), been running it for a month.
Situation: Saturday, I went to an installfest for help getting my Pantech UM-175 USB aircard to work with my new laptop. One of the guys there got it running, and then we downloaded all of the updates. Following download, I shut down the laptop and hit the road. I got home last night, booted the computer a little while ago, and it came up to a command prompt rather than KDE. I was able to log in on the command prompt.
Cold and warm reboots gave the same results, as did Failsafe boot. I am assuming that something in the updates cut off KDE from starting. We did several cold boots at the installfest and it was working fine after the modem install, but BEFORE downloading the updates.
1) How do I manually launch KDE?
2) How do I get KDE to autoload again?
3) Is there anyone in the Reno, Nevada area who is a Suse guru, or are there install fests near Reno?
I'm looking for a way to get my IP address using the command prompt in Linux. I know when you type "ifconfig" you can get your local IP address (i.e. 192.168.0.103), but I'm looking for my IP address that I get from my ISP. How can I get this from Linux without having to visit some website?
View 3 Replies View RelatedI would like to change the formatting on my BASH prompt from this:
anon@machinename.domain.poo:~/some/very/annoying/long/path$
to something like this:
anon@machinename.domain.poo:~/some/very/annoying/long/path
$
The idea is that I would be able to type a reasonably long command on one line without it wrapping to the next line so quickly.
is it possible to have a command line prompt available on the desktop, operating sort of like conky?
View 5 Replies View RelatedI'm getting some weird behavior when I log in via ssh to a ubuntu server. When I log in, there is only a $ at the command prompt, no user name. The arrows don't work, they just put the arrow characters in the prompt. Everything else seems to be ok. Also, when I say logged in as User, I meant a new user I just created.
View 2 Replies View RelatedAfter upgrade to 10.10, I only get the command prompt. Fortunately, all my XP Pro machines are running, and I am using one of them to access this Forum. I suspect that nVidia graphics driver did not load correctly. running startx at the command line gives numerous lines of text apparently understandable xorg gurus. It looks like nvidia_drv.so did not load and module "nvidia" did not load [loader failed, 7] and next line says no drivers loaded.
View 4 Replies View RelatedI want to open another terminal from typing a command to one terminal.
can anyone tell me a command for this..
I have a pretty fresh install on Ubuntu 10.10 Server, with the LAMP bundle installed. Anyway, I just restarted the computer after changing the /etc/network/interfaces script to connect via dhcp. Now when I boot into the server, there is no command prompt and seems to hang there forever, with one blinking cursor in the top left hand corner of the screen. It will not respond to any input besides ctrl-alt-delete. I was able to press control-alt-delete and the computer automatically restarted itself, but it returns to the same state after each reboot. I booted from the grub menu into recovery mode and made sure the /etc/network/interfaces script was correct, and it is. Also I don't think an error in this file should cause the computer to not boot into the command prompt.
View 5 Replies View RelatedI want to send a message from IP to Another IP through command prompt. how can i do this.s
View 3 Replies View RelatedI am working with Linux red hat project for my school projects. I am in command prompt and I see different colored letters. I have words in green and words in blue. I think the blue words are directories and the green ones are files is this true.
View 1 Replies View RelatedIve always had luck doing any kind of updates to my system. I let it auto install the security updates lastnight. Today when I rebooted the machine it just hangs. I would like to attempt to boot only to a command prompt so that I can atleast use vi to edit files and fix the system. Do I have to edit grub to do this or is there keys I can press during boot up?
View 5 Replies View Related