Ubuntu :: Running A Command In The Alt+F2 Prompt Possible In Bash Scripts?
Jan 5, 2010
Is running a command in the Alt+F2 prompt possible in a bash script?I need this for a launcher for gnome-shell.For it I have written a little script to check if the process gnome-shell is alive and act accordingly.The script works fine, I just don't know how to write "debugexit" to the Alt+F2 prompt, as that is the only decent way I have found to shut gnome-shell down and going back to gdm desktop smoothly.
I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt).I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller.
i wonder if it is usual that the results of running commands via the command line is different from running them in a script file. my problem is that, i've to run 'modprobe -r e100' and 'modprobe e100' before suspend my machine via pmi in order to resume it properly. i wrote a script containg EXACTLY the same commands as i typed in the terminal/console but the result was not the same. the machine cannot be resumed as expected if i run the script file.
I am using on Windows Vista, Filezilla server. I have it set up to be accessed via outside IPs and when I use a client on the IP I have it connects normally using Filezilla client. On the same machine I have Ubuntu running in a virtual box and when using filezilla client in there it works fine. Now I want to try the command prompt. So I do the ftp xxx.xxx.xx.xxI enter the name and password and i get the ftp command prompt, but the commands are not working properly. when trying "ls" or "cd" these commands do not work. "cd" tells me that the current directory is "/" root, but this does not make sense in the windows operating system. Now the filezilla client is taking the user in the application window directly to the root folder of the permitted filespace granted to that user. How can the same be done from the command prompt, if there is a way? It is as if the command prompt takes me to the root which does not exist or even have correct permissions to move in. Is there any way to be taken to the correct directory directly, or move there especially when the slashes are the wrong way around etc?
writing bash scripts (wrote my first one this Sunday) and I'm trying to zip a group of files. It has to be in zip format so alternatives like tar won't work here. I have my script in a folder which has a bunch of Sub-directories in the format "Lab 3" "Lab 5" "Lab 6" etcWhat I'd like to be able to do is take all of the files (just the contents not the folder itself) in the "Lab 3" Folder and put them in Lab3.zip. I'm really close but no matter what I try I keep getting the folders put into the zip file instead of the Folders contents
In windows command prompt, F8 key can cycle through your previously entered commands i.e say you enter "ping google.com" and then "pushd <dir>". Next when you type p and then press F8 brings pushd and next F8 brings ping command. You can then hit enter to execute the corresponding command i.e ping in this case.Is there anything similar in Ubuntu Terminal running bash? Very handy to get back previously entered commands.
Is there a way to use exec, but if exec fails to go on with the script?
Example:
Code: #!/usr/bin/env bash exec startx echo "Starting of X failed"
If startx fails, the echo will be seen on the screen. I tried all kind of stuff, but guess it ain't of much use to post it here. I searched the web, but searching for "exec and bash" in one sentence does give results which are not what i am looking for.
In Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
I have one account on an Ubuntu server with the correct PS1 variable and I want to make one of my other accounts on the same server have the same PS1 variable, so that my prompt on this new account (when I ssh into the machine) is the same as the original account.
Is there a way that I can pass this PS1 variable between accounts so the prompt is the same?
I have tried printing it out, copying the output, and then reassigning it to PS1 on the new account, but it just doesn't work.
I'm trying to change the Xfce Terminal Emulator prompt from bash-4.1$ to something like what kconsole has. If i issue a /bin/bash -l in the terminal, then I get the prompt and the colors that I want, but I'd like this to automagically happen when I click the Terminal icon in the Xfce panel.This is for Slackware 13.37 (32bit) and Terminal 0.4.6
I changed the default SUSE prompt setting by modifying the shell variable PS1 to display the following information:
u : the username of the current user h : the hostname up to the first '.' w : the current working directory, with $HOME abbreviated with a tilde
I used export command to setup a new shell prompt:
export PS1="[u@h: w]$ " To add colors to the shell prompt and make a regular user prompt blue I used the following command syntax:export PS1="e[0;34m[u@h: w]$ e[m "
Currently the terminal prompt looks like this:[karlis@karlis-desktop current_folder]$How can I minimize the prompt, so that it only shows $ or # without extra info in square brackets?I checked the preferences for the default Gnome-Terminal and Terminator - there are no settings for this. It is pretty hard to use terminal when working in directories with long names.
After writing a new prompt for Bash, I noticed that one character of my commands were being lost when it wrapped to the new line. Here is an image of the example (I typed 1234567890 over and over):
I'm trying to change the bash prompt and based on the man pages $ should show a $ which changes to a # for a SU. However, this doesn't happen on my machine, it's $ for both user and SU.The line in .bashrc is:export PS1="u@h:w$"
Everytime I log into the linux server at my workplace (I use putty), I don't get the bash prompt right away. I need to execute the command 'bash' to get it. Anyway to make this automatic? e.g.
Just tried to install a minimal F13 from the first CD. Picked minimal as the choice and it still asked for CD #1 and #2. I'll have to doublecheck if that can be averted by manually unchecking everything. However, a bit more disturbing--though that's annoying enough--was the fact that I, on a VM at least, couldn't get to a bash prompt during the anaconda installation. Is that normal now? Can anyone confirm or correct that on an actual hardware install, vs. a VM?
One used to be able to, with F5, or maybe F1, IIRC, get to, during a Fedora installation, a shell prompt, the way the vast majority of distributions do. I'm wondering if this is just an oddity due to the VM and possibly Fkeys not working properly, or something else that they've taken away from from Anaconda.
I am getting more and more comfortable working with the shell, thus I would like to change its prompt color to my liking, as it will be easier for me to distinguish commands vs. outputs.
I've read a couple of instructions of how to change the .bashrc file and am familiar with what the codes in PS1 mean. Except, this file can be intimidating to newbie eyes.
Where exactly on the file is it that I need to make the change?
Here is what I am trying to do. I would like my prompt to like exactly like the prompt I use in Backtrack - which consist in two different colors, one for the host and another for the pwd. Here is what the Backtrack .bashrc file looks like:
# /etc/profile: This file contains system-wide defaults used by # all Bourne (and related) shells. # Set the values for some environment variables: export MINICOM="-c on" export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man:/usr/local/share/man:/usr/bin/man:/usr/share/man export HOSTNAME="`cat /etc/HOSTNAME`"
[Code]....
I also read that in order to have the same results when I log in as root, I will have to copy the modified .bashrc file into /root
I've written custom prompts for several boxes but this one has an error I just can't identify and need a second set of eyes to help solve it.
I've set the following as my prompt: PS1="[e[30;42m]u@h[e[0m][e[30;47m] #][e[0m][e[32;1;40m]w>[e[0m] " (hostname/un obscured & image enlarged slightly to make it easier to read.)
Everything looks fine initially as you can see here:url
1- It sets the username@host in back on green text. 2- It then changes to an off-white an prints the command number for the terminal. 3- Next, changes to a green on black font and prints the working directory. 4- Finally is prints a ">" character and a space.
The problem occurs when I try to "up arrow" to reuse and/or edit a prior command. It prints the prior command fine, but if I arrow over to edit the command sometimes the first character can not be deleted from displaying as you can see in the following composite screen-shot
url
Here I did a simple ps and piped it through grep. After getting the output, I up-arrow to repeat the command. As you can see by the second section the cursor only goes back to the "s" in ps. The "p" can not be deleted. Hitting enter just displays a new line, so the "p" was just a ghost being displayed and not really there.
I create a bash script that writes another bash file. But in the generated bash file I want to write a bash command in the file and not executing it.Here's my bash file:
Code: #!/bin/bash cat > ~/generateGridmix2data.sh << END
I am working on different versions of Ubuntu & I looking for a script that will prompt the user to enter the host name & user name that he wanted for that system at initial boot up.
I have a script almost working except for 1 thing. What I'm trying to do is read a file that has the files that need to be FTP'd using a bash script. I have everything working except the reading of the file. It works outside of the ftp script I've wrote but once I put it in the FTP script it doesn't.
Here's the Script:
#Here's where the problem is that I know of
I've been playing w/ the exclamation points to see if that could be the problem, but so far no luck.
