if it's possible (or how to) upgrade the kernel using apt-get? ...particularly from 2.6.35.4 to 2.6.38-8.I'm using an upgraded Ubuntu 11.04 installation
View 5 Replies
I have been running Ubuntu 9.10 for a while now. Today, I ran updates on my computer and also requested the upgrade to 10.04. Unfortunately, a few hours into it my computer hung. I had no choice but to reboot. When I did so the computer started a 10.04 screen and then went to a 'command line' for me to login. I am able to login, however, all i have is the 'command line'. What can i do now? Can I restart the upgrade from the 'command line'?
View 3 Replies View RelatedI clicked on the upgrade to LTS 10.04 option on my Asus 901 EEE PC and after completion it will only boot straight to command line...I would like to get back to the UNR Gui.
View 2 Replies View RelatedI had problems with python stuff and so update manager did not work. Also many other problems, PiTiVi was installed but did not start eg... After many trials of this and that I removed python-gtk2 and so also ubuntu desktop. But was unable to get it back. Now I cannot even shut down. While it is not possible to install desktop or anything else, would it be possible to fix this by upgrading the whole system to 10.04 (10.10?)? Would it fix python installation. How could I do it. Some info tells to change sources.list and run apt-get upgrade, but some tell not to do so.
t@t:~$ update-manager
Traceback (most recent call last):
File "/usr/bin/update-manager", line 26, in <module>
[code]....
Keep getting alert notification box, with close button. But get no response from keyboard or mouse. So I can't get past it. It seems that you do not have the hardware required to run Unity. Please choose Ubuntu Classic at the login screen and you will be using the traditional environment. (Late model Dell, probably less than 2 years old.) But since I can't use the mouse to activate the close button, or use the keyboard (alt + x, or enter), I can't get past that point. Is there some control sequence I can use during boot startup and get to single user mode and modify something?
View 8 Replies View RelatedI've been unable to do a fresh install of XBMC Live 9.11 to my hard drive. Everytime it fails at the Install System step. But I am able to get XBMC Live 9.04.1 to install successfully. How do I upgrade XBMC Live 9.04.1 to 9.11? I understand that Ctrl+Alt+F2 brings up the command line, but what are the next set of commands to run?
View 1 Replies View Relatedhow do you download an update or an upgrade (or whatever it's called) on a command line. for chromium internet browser. opened the computer and couldn't watch videos. i tried all the downloads available on adobe's website and all of them are on my "downloads" folder and when i click on any i just get stuff i don't understand and i simply find it easier to download through terminal.
View 9 Replies View RelatedI compiled the 2.6.31.6 kernel and <insert drumroll> it boots!(my first kernel roll, I'm kind of shocked actually) That's the good news. The bad news is that my NVIDIA drivers are gone in the wind. That's not entirely true as I can still boot into the old kernel and startx. Is there a way to download the driver using the command line for reinstall?
View 4 Replies View RelatedI've upgraded a server on our LAN from fully functioning Wheezy to Jessie. All seems fine except remote administering using Putty from my windows workstation when issuing reboot from command line, it goes down and reboots but stops at login prompt asking for username and password and does not come back on the LAN network. This server does not normally have a monitor or keyboard so my ability to remote admin this server in effect is disabled.
If I log on, it will come back on the LAN network. I've checked the logs but can't see any errors. Is it in the configuration of Jessie somewhere or perhaps a Grub issue. I have 5 other production Wheezy servers that I intend to update to Jessie once I understand how to deal with this problem.
I upgraded in Ubuntu from 2.6.28-13 to 2.6.30 and now I get no line-drawing characters in applications like alsamixer; instead they are replaced by 127-bit chars like 'lqqk'. As a coder, I'd really like to understand what happened - what changed (file in /etc?) affecting terminal capabilities, and what does the kernel have to do with it .
PS: the distro is Jaunty and I used the debs at http://kernel.ubuntu.com/~kernel-mainline/:
Code:
linux-headers-2.6.30-020630_2.6.30-020630_all.deb
linux-headers-2.6.30-020630-generic_2.6.30-020630_i386.deb
linux-image-2.6.30-020630-generic_2.6.30-020630_i386.deb
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedMy company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?
View 1 Replies View RelatedI recently upgraded the kernel in 9.10 to fix a problem of no sound on my laptop but this killed wireless However I could still boot into the previous kernel to use wireless (albeit without sound). I found a fix for this problem on the forums: [URL]... but It didn't work so well in my case. Specifically after executing the command
[Code]...
If anyone knows how to undo the rmmod dell_laptop command or has some insight into what I might be able to do let me know
I have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...
View 3 Replies View RelatedI'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
Code: cmd='date | wc'
$cmd If this script is executed, an error is generated. The reason written was that "The execution fails because the pipe is not expanded and is passed to date as an argument".What is meant by expansion of pipe. When we execute date | wc on the command line, it goes fine.then | is not treated as an argument. Why?
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
I tried
Code:
chown -R owner:group *
which does not work on the invisible directories (why?). When I used ".*" as wildcard it changed all (visible) files including the parent directory (the one I was currently working in which is the "dot") . I can change the invisible directories owner and group using dophin but how is it done from the command line?
I am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I'm trying to convert this awk command from command line into an awk script, but just cannot get it to work:
This is what i have after my BEGIN
Am i missing something here? this just prints out the count for everyline, not counting lines on 5th field that match 'A'
how do you write the ASCII character #27 in the vim command line?
View 6 Replies View RelatedUsing netbook asus 1005ha with lucid beta 1 with most of updates on learning to use the CLI and headaches cd command does not seem to reconise directories here is a sample
Code:
yeh i know read the f#####g manual i am but any help would be greatly accepted tried sudo with same commands same problem did have a problem on my debian system that was to do with paths this is not the same on a different footnote anyone thinking of upgrading to lucid sit tight on 9.10 there are still to many issues that need ironing out for a system that is your main system.
The server runs# uname -r2.6.18-128.4.1.el5However, today I executed yum update kernel*due to security advisory. I was just about to reboot the system when I realized that it runs VMWare Server Instance that will most likely fail to restart after kernel upgrade (I had a hard time fixing it after previous kernel update). Now I want to keep 2.6.18-128.4.1.el5 after reboot.I see that new kernel is scheduled for booting:
# cat /etc/grub.conf
default=0
timeout=20
[code]....
If i use yum update option it upgrades to latest kernel but i only want to upgrade to kernel-2.6.31.6.
View 8 Replies View RelatedIs it already in the latest Ubuntu kernel or, if not, should I employ it or it's wonderful alternative or just wait for it get into the kernel?
View 9 Replies View RelatedI am currently using Ubuntu 10.04. How would I install the 200 line kernel patch? The one that is supposed to make your computer so much faster.
View 4 Replies View RelatedHow can we do everything, or as much as we can do, from the command line? In particular, I am trying to get rid of the top panel in Ubuntu. Because,
1) It takes unnecessary valuable space.
2) Even if I use a huge monitor, it introduces distraction to me while working.
I created a shortcut so that with a single keyboard key I can open a terminal. For example, if I want to restart the computer, I use: "sudo shutdown -r now". Or I can even create a shorter alias. So I do not need the logout menu. But my problem is, some programs put an icon on the top panel when they are working. So, what is the best way of using command line, and getting rid of the top menu.
