I accidentally did a 'chmod +x foo' when i meant to do a 'chmod a+r foo'.
-rw-r--r-- 1 casper trad 53 Jul 17 22:41 filegore
-rw-r--r-- 1 casper trad 13 Jul 17 22:41 filelemme
-rw-r--r-- 1 casper trad 24 Jul 17 22:41 nix
[code]....
How to use CHMOD in linux? When I try to delete a file/folder, permission is denied. What exact params must I give for chmod here? This is what I need to do. Execute a command ./build.mips , but I get permission denied error.
kirti@sgf:/disk/go$./build.mips
-bash: ./build.mips: Permission denied
how to get permission by chmod
View 8 Replies View RelatedI had created a file under a directory & set the permissions through chmod command but when I create another file under this directory, I get the default permissions. Is this due to umask or can I set the file permissions through chmod under a directory.
View 5 Replies View RelatedIf I am not the file' owner or root, can I use chmod to change the file permission?
Assume I have group/write access to the file, e.g. 775
I'm used to setting up SGID on a directory
chmod -R g+s example and then
chmdo -R 750 example
And have the directory and all sub-directories preserve the set-group-ID. On CentOS SGID gets overridden by the second command.The OS is CentOS release 5.6 (Final)In theory, and like it says on this page, "if commands like chmod routinely cleared these bits on directories, the mechanisms would be less convenient..." and it's exactly whats happening. chmod -R 750 is effectivelly removing the SGID.How can I make g+s permanent?
How can I give execute permission to chmod command from run level 3.Because in GUI mode we have the execute option in the properties of file. E.g. I gave following command
chmod -x chomod
After that I want to give the execute permission (x) to chmod command again but how from command prompt?
So I gave the following permission using sudo su to some directories:
sudo a+x -R ~/<SOME FOLDER>/*
sudo a+w -R ~/<SOME FOLDER>/*
After doing this, I can access write and read all directories but my terminal shows these folders highlighted and I really dont like this. Is there any way they can look like before (with no highlights)?
Is it possible to change only directories access permissions recursively with some linux command. I need to set x (access) permissions on directories but not execute on files. [URL]
chmod - change file access permissions
-R, --recursive
change files and directories recursively
can chmod make any file executable?
View 4 Replies View Relatedthat works to disallow non-owners from renaming the file, but what I wouldlike to do is disallow EVERYONE ( including the owner of the file ) fromediting, moving, or changing the filename once it is created. the only personwho should be able to make those changes is a special user.
View 13 Replies View RelatedI am using chmod(), function to set permissions for my files/directories.How can I set -R flag for it???
View 4 Replies View RelatedI have created directories in root. I am looking for the chmod command to allow all users read and write permissions to a specific directory. I have done chmod 775 for a file but I need this for a directory. This includes permissions on all files and sub directories.
View 3 Replies View RelatedI work in a shared computing environment and the default setting is r-x for group and others; it's upto the users to change this. I can chmod and change the permissions for all the files. However any new files created all have the default permissions. Is there anyway to change that so that I don't have to chmod everytime or run chmod as a cronjob?
View 1 Replies View RelatedI've got some trouble while trying to install some applications on my linux system. It is said that the files in my /var/www/html/xxx directory, where I put them, is not writeable. The command chmod 777 xxx has been tried to make it work, but the error remains when I opened the applications again.
To be specific, I want to install phpFreeChat on my system, so I put those files in the /var/www/html/freechat directory, cd there and typed chmod 777 data/private, chmod 777 data/public on bash. Here's the result of list -al data:
drwxr-xr-x. 4 root root 4096 Jun 17 15:07 .
drwxr-xr-x. 13 root root 4096 Jun 17 15:22 ..
drwxrwxrwx. 2 root root 4096 Jun 17 15:07 private
drwxrwxrwx. 3 root root 4096 Jun 17 15:07 public
These all seemed all right to me, until I typed http://localhost/freechat in my browser. Here's the result:
phpFreeChat cannot be initialized,
please correct these errors:
/var/www/html/freechat/src/../data/private
is not writeable
[code]....
I have an external USB hard drive (sdb1) mounted at /media/Iomega HDD. When I try to do a chmod to a directory on this drive, chmod doesn't give me an error, but it doesn't change the privs - even when I'm root. Why is this?
Code:
root@d-desktop:/media/Iomega HDD# ls -lart
total 2176732
drwx------ 1 dan dan 456 2010-08-01 16:24 Unison
root@d-desktop:/media/Iomega HDD# chmod -v a+rwx Unison
mode of 'Unison' changed to 0777 (rwxrwxrwx)
root@d-desktop:/media/Iomega HDD# ls -larth
total 2.1G
drwx------ 1 dan dan 456 2010-08-01 16:24 Unison
root@d-desktop:/media/Iomega HDD# /usr/lib/klibc/bin/fstype /dev/sdb1
FSTYPE=unknown
FSSIZE=0
root@d-desktop:/media/Iomega HDD
In Linux, how do i prevent users from executing chown, chgrp or chmod?
View 2 Replies View RelatedI would like not check first, and if not ok, then to write the permssisions. Means no use to write endessly on disk if not needed. How to check and fix the permissions to avoid writing (chmod o-rwx /home/*) ?
View 3 Replies View RelatedI run a small site and today I've discovered that my site is down. I found that cPanel has flagged the account suspended even though I haven't got any quotas on the account. I don't know what went wrong. I've tried to unsuspend the account in WHM but a certain part of the function failed.
Quote:
safe_userchgid: chown: /home/crocbits/public_html: Operation not permitted at /scripts/cPScript/SafetyBits.pm line 93.
After searching the internet someone mentioned that the problem might lie in the permissions of the public_html folder. I had a look at the permissions and the folder had no permissions d----- When I try to chmod the folder I get this error:
Quote:
chmod: changing permissions of `public_html': Operation not permitted
I have no idea what to do next. All the files in the directory are locked too. I tried to move them but this command isn't allowed either. I ran these commands under the 'root' user in SSH.
I have a Qnap 219p NAS to which I have connected a USB external harddrive. I can access the external harddrive from my windows box using the network share, but at first i couldn't access the folders. The permissions set in the NAS GUI for the external drive is correct and are identical to the permissions set to the 2 internal drives.
I ssh'ed to the nas and used 'chmod -R 770 /share/external/sds1' - this granted me access to the folders, and some files. I can open all files in the root, but if I go just 2 folders 'deeper', i can't open the files in this folder, and in the folders after that.
In ssh, if i navigate to the folder wher I cannot open the files and use 'ls -l', i can see that the permissions (770) hasn't been applied to these files. How can I get chmod to apply the 770 permission to all files, folders, subfolders and files in subfolders etc., without having to chmod every folder one by one?
I did command:
sudo -s
chmod 770 .
chmod 770 ..
And now I cannot login on my test server notebook. Please do not ask why I use server software on my notebook. Cause I like it and I use it only for typing text en learning linux commands. So I have a notebook with ubuntu server 8.04.2.
First question is:
Why have linux after command ls -l -a this output?
drwxr-xr-x 21 root root 4096 2009-11-04 20:45 .
drwxr-xr-x 21 root root 4096 2009-11-04 20:45 ..
And how must it to set and use? What is it's function? How can I repair my server notebook? Must I unmount my harddisk with a sqrewdriver and connect it to/on an other linux machine? If its needed, I can do that.
i was trying to make a script to redo a chmod on a folder every 15min. by using crontab (*/15 * * * * /(link to script.sh)
now i didn't know much about the use of the scrips so i just write in the command i would in terminal chmod -R 664 /data/
i try to run the script in terminal and now i can't see the files in that folder. but acording to the folder properties, i am still using the disc space where the data use to be, so the data in the folder doesn't seem to be deleted.
the main focus i want is how to get the data back. scripting and others can come later.
how can i get to see my data again?
I've hit a wall here; I'm attempting to find some way by which to view files and cd into directories on a device mounted read-only. So I need the permissions to read, write, execute (and the same with directories), but chmodding is out of the question because I don't want to alter the drive one iota.
I guess what I could do--what I was thinking of initially--was to dupe the whole drive and then mess with permissions. This wouldn't affect the original (actually I'm working on a duplicate of the original, but I'm treating it as if it were the original) but I was hoping for something that would maintain data integrity. This is a forensic application and not altering the data is very important.
I am desperately trying to recover two folders from a Freecom FSG 3 NAS. As far as I am aware it is running Linux 2.6 based on Snapgear. After working through the hardwares' recovery procedure a number of times, the state of the device appears to get worse and worse. So I have attempted to rescue the files by using a program called Putty to access the device over SSH.When I access the device using Putty I login as admin. The folders I need to recover are located in the home folder. Listing the contents of the directory I get...
/home $ ls -la
ls: ./.twonkymedia: Permission denied
ls: ./Sarah: Permission denied
[code]....
I accidentally chmodded my entire /etc/ folder to 755 privileges.
It's not completely critical because my system is a home server.
My biggest problem is that MySQL is pitching a start-up message saying that I have 'unprotected key file', clamav is stating that it won't start until it has owner permissions...
I did chmod 600 /etc/passwd just in case.
"How do I see all the start-up complaints in a text file?"
I wan to install a .bin file after I logged in as a super user also changing mod of the file doesn't work as proved through file properties I tried also chown but in vain here is a picture of the terminal:Quote:
[aratux@localhost downloads]$ su
Password:
[root@localhost downloads]# AdobeAIRInstaller.bin
[code]....
Well I did something really stupid:sudo chmod 700 -R /Why? because it's late and I'm tired and somehow thought it was only on my current dir...Is this somehow fixable? I don't get my usual loginscreen so I guess through an tty?
View 9 Replies View RelatedWhen I try to issue "su -", I get "su: Authentication failure", and I'm 100% sure password I enter is ok.
I think it started to happen after I issued
chmod +s /usr/bin/screen
chmod 755 /usr/bin/screen
which I believe is unrelated to this problem, and,
chmod -s /bin/su (-s by mistake)
chmod 755 /bin/su
which most probably made the whole mess...
this is not the part of the problem I believe but here's some background why I did that... when trying to make possible for screen sessions to be started automatically on boot under non-root account, I entered something like "su - username -c "/usr/bin/screen -dmS screenname ./executable-file"" in bootmisc.sh, but I was getting "must run suid root for multiuser support", so I tried to fix it, and now I can't login to root account no way.
I've got a Centos server setup as a web server and have no problems doing anything from the command line. Some users need to connect via FTP, and need to be able to chmod files and directories as they please. I've been able to allow the users to connect to the web directory via FTP, but can't work out how to allow them the ability to chmod anything within the folder. The files were originally uploaded by root user, however I want any user connecting via FTP to be able to edit permissions as they please.
View 1 Replies View RelatedI have setup my debian 8 web server.
For some reason I am having some issues with permissions of some images. They don't render because they are not set to 644. Now for some reason when I uploaded these files onto my shared hosting with cPanel the files work fine and permissions are fine. I can see there is a permission issue for the files locally on my Mac (OS X - El Capitan).
When I changes these locally on Mac the permissions go all weird and are prefixed with Custom, rather than mac-user-name: Read & Write, staff: Read, everyone: no access. then changes to custom: read & write etc. So then i tried changing permissions on web server see below and I get permission denied and after all the files are gone, i can't delete the images folder through SFTP or SSH. I changed back the image to 755 and tried deleting and still nothing. Not sure what the problem is. Before I chmod I checked that the images are set to the correct user and group as per the rest of the site.
So I try:
Code: Select alluser_name@debian:/var/www/html/_files$ chmod -R 644 images
and I get this return:
Code: Select allchmod: cannot access ‘images/box-icon.svg’: Permission denied
chmod: cannot access ‘images/ie-icon.svg’: Permission denied
chmod: cannot access ‘images/google-plus-icon.svg’: Permission denied
chmod: cannot access ‘images/mobile-ready-icon.svg’: Permission denied
chmod: cannot access ‘images/404.jpg’: Permission denied
[Code] ....