Ubuntu 10 is great. Love it. Am still running with dual boot as am a bit of a games addict. However want to give Ubuntu more room as will be my work area. Can I make the Linux partition bigger with the disk utility that comes with Ubuntu 10.10?Played around with Linux in the early '90's.Sure has changed.Easy installation, device recognition better than Win 7 and great working environment.
View 3 RepliesWhen I installed Ubuntu I set it up to dual-boot with windows and didnt put much thought into the partition sizes, and now I want to make the ubuntu partition bigger. I shrunk the windows partition from gparted fine and then booted up off my ubuntu 10.04 disk to make the ubuntu partition bigger, but it won't let me do so from gparted. Attached is a picture of how my hard drive's currently set up.
View 8 Replies View RelatedI have a laptop that came with Windows Vista (64-bit) installed. I created a new partition and installed XP (also 64-bit) alongside it.Last night I shrunk my XP partition and created another new partition and installed Linux (CentOS 64-bit) on it. I made an error in judgment and didn't allocate enough space, so I need about 10 more gigs for the Linux partition. It boots up and runs, but I need about 10 more gigs of storage for the files I want to keep on the partition (and yes, they have to be on the partition, I definitely need to know how to do this, not a workaround)I went into Vista and shrunk the XP partition by 10 gigs, so now I have 10 gigs of free, non-partitioned space.
As it stands, when I start up the computer I get the GRUB boot loader. I can boot my Linux install or choose "Other" and be taken to the Vista boot loader. From there I can choose XP or Vista to boot.So, my question is... what is the best way to append the 10 gigs of free space to the Linux partition? Is this something I should do inside of Linux? I have the option to do it in Vista, but the partition shows up as "healthy" but without a file system type.I just don't want to screw up the boot loader, partitions or anything else.This isn't my area of expertise, so if anyone could give me a good suggestion or solid answer
I have a dual boot system 9.10 and XP. The hard drive is 234. For some reason during the install I only allocated 128 to windows and 16 to ubuntu. Or at least, gparted tells me I have 127.99 NTFS and 104 unallocated (=231G ??).
System monitor tells me I have the following:
/dev/loop0 is ext4 = 16 G total
/dec/sda1 is host = 128 G total
this is 134G total
From windows, the partitioner tells me the same. I have 104 of unallocated disk space and 128 of NTFS. I assume the 16G allocated to ubuntu is inside the 128G?. How do I get that additional 104 into ubuntu without screwing up the MFT of windows. Or can I? Is it as simple as telling gparted to format the space? or will that mess windows up?
I plan on installing Ubuntu 10.04 and it will be my first Ubuntu install. I plan on dual booting with windows 7 and I would like advice on partition sizes. I have a 250 GiB drive and my planned partitions are as follows.
Sda1 (PQSERVICE) 12GiB This was pre-installed should I delete it
Sda 2 (System Reserved) 100MiB This was also pre-installed should I delete it
I know one of the above is the windows recovery partition but I don't know which one
Sda 3 (Gateway) 25 GiB This will contain windows will 25 GiB be enough
Extended partition
Logical 1 10 GiB / the main Ubuntu partition 10 GiB should be enough
Logical 2 1 GiB /home this will just hold settings so 1 GiB will be enough right?
Both above partitions are ext3
Logical 3 3 GiB swap partition I have 1 gig ram upgradeable to two
Logical 4 180 Gib shared NTFS partition
I am new to Ubuntu and would like to know if you think this is proper. I have already defragmented the hard drive and will make the partitions in Gparted on Ubuntu live test from usb drive.
I am new to linux and have installed fedora 12 on my system. The partition sizing which I had done is :
- 17 gb
home- 8 gb
mp -1gb
usr -2gb
Boot -200mb
swap - 4gb (I have 2 gb RAM)
all partitions of ext4 format.
I would like to know that whenever I am going to install any new software or packages then it will be installed in which folder or partition? I have only 170 mb space free in user and have not installed any thing yet. Do I need to resize it. If yes, then how can I do so?
I have a dual boot system with XP and CentOS 5.3, I want to access the NTFS partitions of XP from CentOS but how?
View 1 Replies View RelatedToday I was messing around with my partitions, and I decided to shrink my main partition that had Windows on it, so that I would could have one big storage partition and then a Windows 7 one and a Ubuntu one. Well, it didn't really work so I decided just to wait for Lucid to come out and start with a fresh install. So I went into EASEUS Partition Manager and resized my main Windows 7 partition back to its normal size. It had to reboot and did its stuff, and then when I restarted my computer, grub was showing the grub rescue> thing. So I went into the Windows 7 recovery disk, and tried all the BootRec.exe options. None of those worked. So I decided to go to the extreme and just delete Ubuntu completely.
I deleted the entire partition with GParted and then resized the main partition all the way. Then I booted into a Ubuntu live usb and re-installed Ubuntu. I thought it would just reinstall Grub and I would be able to get to both Ubuntu and Windows 7. It did install Grub, but now I can only boot into Ubuntu. It's really weird, because I can boot into windows, it just says starting windows and does the loading thing. And then EASEUS Partition Manager comes and says that all resize operations were complete successfully(because I hadn't booted into windows since I resized stuff with it) and then the screen just stays black for a long time. I don't know what to do. If I wait long enough, my computer just reboots...
I am about to get a new laptop here soon and I was planning a dual boot like I have on my current laptop (Win7 and Ubuntu), but I have something special in mind. I looked around the forum to see if there was anything like what I had or if it was even possible but I didn't see anything quite like this.I was wondering if this was even possible, and if so, would anyone be able to tell me what filesystem I should use for my windows swap partition?
View 6 Replies View RelatedAfter running Lucid since it's release I decided to wipe out my Karmic partition yesterday in order to utilize that space better elsewhere. So I booted up with the Karmic LiveCD, using the option just to check out Ubuntu. Then I opened up Gparted, unswapped (unmounted) the swap partition, made sure nothing else was mounted, and proceeded to delete my Karmic partition which then provided me with about 40 GB of unused space.
Since I wanted to re-assign 10 of those GB to my primary Ubuntu software partition where I keep all of my personal data, I went ahead and resized that one to make it 10 GB larger. First I had to move the empty space over which took several hours, but that wasn't a problem. Resizing the partition wasn't a problem either. Then I wanted to re-assign the remaining 30 GB to my Ubuntu boot partition which contains strictly my Ubuntu system ... and that's where the problem is.
The remaining unused space on the hard disk is located directly next to my Ubuntu boot partition. No matter what I do while using Gparted via the LiveCD, it doesn't seem to be possible for me to enlarge that boot partition. Does anyone know how I can do this either via Gparted, the Disk Utility from Lucid, or even via the terminal?
First of all, the boot device is an 16GB SD card. I install Citrix XenServer on it but I make the partition too small (XenServer makes a lot of logs file). I resize the partition but now it give "Illegal OpCode" and red screen everytime it boot.I already create the image of the whole SD card using dd and already try these process three times = restore the image, test that it can boot properly, then resize the partition using gparted, then it can't boot.
I already post this question in XenServer forum (with screenshot) but nobody answer there.The hardware itself is HP Proliant ML350 G6 with internal SD slot.
I have decided that my partition table does not meet my needs Barrymore, and I want to shrink the "/" partition by 80GB, and then create another file system on that space. I did some research on-line, and I'm not sure which way is the easiest and more secure way to perform the change with out putting the "/" file system on risk.
View 1 Replies View RelatedA while back I ran into the situation of running out of space on /boot. When I last installed Suse I just went with the recommended LVM layout, which proposes a very small /boot partition. When you run out of space you are now faced with resizing the LVM, which Gparted unfortunately does not support.In Googling around I did not find a concise guide, so I collected the information I needed and and then wrote a guide on the steps I used to resolve this issue and it is available at Resizing Default LVM Partitions and Moving /boot - Mine the Harvest
I found using EVMS from a live CD to be quite simple and was able to create a new /boot partition and reconfigure grub to use it in very short order. I was quite impressed with how easy to use EVMS was and the options it provides. (I think that the default LVM layout the Suse installer proposes is overly conservative on the size of the /boot partition. Why not allocate a few hundred megs, especially considering the size of drives today? Perhaps Suse will soon move to using grub2 and eliminating /boot altogether, but for now the very small allocation of space can be a bit of a pitfall for users -- especially when they are not familiar with resizing LVMs and reconfiguring grub. Of course moving to grub2 also introduces its own complexities too.)
I used gparted in PartedMagic to resize my /home partition from 360GB to 160GB, and create a new FAT32 partition out of the remaining 200GB.My /home directory only had about 9GB worth of files in it and as far as I can tell there was no reason for any of them to be anywhere near the portion which was deleted. So the resizing and creating the new partition seemed to go fine. Then I rebooted and it got stuck while booting into Debian.
I tried checking my BIOS for an IOMMU option but there doesn't seem to be one at all. I also only have 4GB of RAM so I don't know why it thinks I have 4.75GB.
I recently used a GParted CD to resize my partition with Vista installed on it in order to make room for another partition in which I installed Linux onto. I, unfortunately, did not back up my data. My Vista partition now does not show up in Grub and when I set it to just boot to the Vista install it will never boot and is stuck in a loop.
I tried using this guide to try to get it back. My problem comes about halfway through this guide when I go to repair my Vista installation nothing shows up under installations. I would really like to get my data from the Vista partition. I guess if I'm SOL then at least I'll remember to backup my data next time..
When I run out of space on my Ubuntu partition, which will probably happen with me being the untidy person I am, is there a way to resize the partition in Windows or Ubuntu that will allow the other to boot? As I've heard stories of using Gparted to resize a Windows partition doesn't allow Windows Vista to boot up as it removes a crucial part of the operating system? I have adequate space to give to Ubuntu on my NTFS partition. May I also add that to install Ubuntu I had to use the partitioner that came with the installer, because the Windows Disk Manager wouldn't let me partition the NTFS drive, because it Denied my Access.
View 4 Replies View RelatedI had installed CentOs 5.3 on a Virtual Box machine (v. 3.0.10) and then I needed more free space to upgrade to CentOS 5.4 on partition /. I wanted to substract some space from /home partition in order to add some more free space to /. Thus I used a gparted live cd (v. 0.4.8-1) that it is a debian live cd. I resized the partition as I wished and every operations went successfully, but when I tried to reboot the only message that I see its 'GRUB' and nothing else happen. If I start again with the gparted live cd, everything seens to be fine as the partitions are there but I can't boot the system.
View 3 Replies View Relatedis it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies View RelatedI just recently installed ubuntu 9.10 in my upstairs computer. It is a single boot system.Downstairs I have a dual boot system. I have windows vista and ubuntu 9.10 installed. It worked fine. I wanted to make this a single boot system and uninstall ubuntu 9.10. I cannot get rid of the grub bootloade
View 14 Replies View Relatedif having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedAfter installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I want to partiton my hdd so I can dual boot XP SP3 & Ubuntu 9.10. Currently I just made 1 partition (NTFS) on 1 320GB hdd. And I need to make a partition for ubuntu.tutorials for this? Also I'd rather not have to use 3rd party tools for this.And just a quick question, after I do this, will the files be sharable between the 2 os's. Provided the file type can be used in both.
View 9 Replies View RelatedI have a dual boot win 7 ubuntu 10.10 setup. Didn't update ubuntu for about 6 weeks but then did all updates at once, after that, ubuntu wouldn't boot. Is there anyway I can ubuntu and recover my data?
View 2 Replies View RelatedRan Karmic for a while in a wubi installation with XP. Very unstable, lots of headaches at inopportune times. Now I'd like to try separate partitions so Windows might leave Ubuntu alone and not nibble it away as it did under the wubi installation. Here is my current partition status:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
129 heads, 4 sectors/track, 605778 cylinders
Units = cylinders of 516 * 512 = 264192 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]...
I have a jpeg file on my Windows system that won't delete. However, when I try to boot into safe mode to delete it, I can not get into the menu to select "Safe Mode". F8 just boots me right into Ubuntu.I have Windows 7 and Ubuntu 10.10 on an Acer Aspire 5520.
View 3 Replies View RelatedI've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
When I first installed Ubuntu as a dual-boot (about 18 months ago), I had problems booting to XP, which were eventually solved for me in this thread, which set Windows to boot Ubuntu, rather than the other way round.
I've just had to do a fresh install of Maverick, following a major problem, and I'm back to being unable to boot XP. The error is different from before and I don't want to start guessing at what to do about it and screwing things up still further.
The GRUB menu lists Ubuntu first, then Windows XP. If I choose XP, it takes me to my previous boot menu, with Windows as the first option. However, selecting this gives me
Code:
Windows could not start because the following file is missing or corrupt:
<Windows root>system32
toskml.exe
Please re-install a copy of the above file. Windows and Ubuntu are on separate hard drives. XP was fine until I re-installed Ubuntu.
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I'm trying to understand how I can partition my hard disk to allow for a dual boot (Windows & Ubuntu) as well as allow access to a certain set of files from both Windows & Ubuntu. So far I understand that I'll need:
1 Windows boot partition ~2-4GB
1 Linux boot partition ~2-4GB
1 Linux swap partition ~1-2 GB
But I don't know:How can I keep my non-boot linux files & folders -- /home, /usr, etc. -- separate from the boot files? Do I need another partition? If yes, what size & format -- FAT32, ext3, etc. -- should it be?
If I separate, for instance, the "/home" folder only where do the remaining folders and files reside?
How can I access certain files with both Windows & Ubuntu? Do I need yet another partition, formatted in FAT32?
I would like to install XP to /dev/sda5,sda6 being karmic. (I may have a dying dvd burner as was unable to install it yesterday but..) I got in a dreadful mess with grub after attempting to upgrade to Lucid,I needed to reinstall anyway. Will I be able to dual boot or should I just start from scratch?
View 4 Replies View Related