I incorrectly changed the command under Folder Properties to open all folders with the wrong program rather than the Ubuntu default program. I now can't open the folder properties screen using the right mouse button. How do I get back to the properties screen so I can change this back to the default open folder command?
View 7 Repliesjust want to report "Right Mouse Click Freeze" on Ubuntu 10.10. When I click on anything with my right mouse button to open options menu it freezes and does not open menu. Sometimes when I shake my mouse left/right a bit it opens that menu, but this does not work always. It seems like xserver issue, but I'm not sure since I'm not expert in linux yet. It's very annoying issue that I would like to resolve asap.
My System Specs:
Intel Core 2 Quad Q6600 @ 2.40GHz
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400)
Western Digital 250 GB Hard Drive
Ubuntu 10.10 64-bit (Kernel Linux 2.6.35-22)
(Used Desktop Install CD)
1) Any process (including boot, shutdown, download, open programs, etc) is freeze (don't have any progress) until I move the mouse or hit any button, so for install and use my ubuntu I have to keep moving my mouse and as you imagine is VERY TIRED.2) I get some general freeze on random times, neither the mouse, keyboard or process move, I notice that if I unplug power it unfreze, and I can work for some time.This 2 problems annoy me a lot, and I suspect is a problem related to my Netbook Model, I read about someone that has the same problem but no solution there.
This is what I did:I Try Ubuntu loading from my USB memory (1GB), run very good but with the 2 problems, but I thought it can be resolved installing.I installed along side with W7, couldn't boot Ubuntu, so I configured GRUB2 and it could enter now, but if I don't press **** after selecting Ubuntu it give me the BusyBox, and then the same 2 problems.I get rid of my W7 and did a Full Install on my 160GB HDD, hoping it can work fine, but no.I install all updates and no effect on that.
While searching the net I found how to complete disable the functionality of the middle mouse button but I need this button for many other uses.I want to disable only it's paste action.
View 2 Replies View RelatedI know how to make another button act as the middle button but how can I map several mouse buttons to the middle button? xmodmap complains if I repeat button numbers in the pointer option.
View 2 Replies View RelatedI just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
View 1 Replies View RelatedCNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20.
The only avalible resolution is 1600x900.
/etc/debian_version 8.1
GNOME Terminal 3.14.1
xnee 3.19
I am having issues with the gpu drivers and the touchpad, both of which seem to be traced back to xorg.conf.I can set the proper resolution using nvidia-settings, but it resets to 800x600 on restart no matter what I do. I have used the gui to save, I have tried nvidia-xconfig, and I have tried to just editing the xorg myself, but it always goes back.I am having even worse problems with the trackpad. I downloaded and installed the synaptics package, but nothing I do changes the trackpad settings. Mouse properties has no trackpad info in it.How do you properly configure resolution and trackpad settings on rhel?
View 1 Replies View RelatedI have some problems with my Ubuntu 11.04 x64 Maybe it's the video card because moving the windows goes very slow Wine is also doing very strange because when I try to open a game the screen blacks out and can't move my mouse and then it crashes. I have the drivers installed of my ATI Radeon HD5650 ( fglrx)
PC/Ubuntu Info:
Code:
I'm having trouble finding the correct modifiers to the stat command to print out the file/folder properties in human readable format. I would like to run a command on a given file or folder and have the file size in kb, mb, or gb size as opposed to byte size in addition to other pertinent information.
View 2 Replies View RelatedAfter upgrading to 11.04, I noticed something strange, being that when I want to drag a file or folder from one Nautilus folder window to another which is not visible, I can no longer hold the item over said folder's taskbar button and wait for it to appear. It just shows the + for copy, and when I let go (which I have no choice but to eventually do), it creates a launcher to that item (I assume it's doing that, and not actually copying there, but the + has me unsure).
I've looked in Nautilus's preferences to see if this is some new behaviour that I can revert back to, but could find nothing there.
I'm of course using the Classic desktop with bottom panel being the taskbar. If you know how I can rectify this, please let me know, as the times I would want to create a file or folder launcher without the usual hassle would be rare, but I am constantly dragging stuff from one folder to another, and it would be a real pain to have to line up source and destination folders each time.
I dont know why but I cant open the appearance properties anymore.The error was 'BadAlloc (insufficient resources for operation)'.(Details: serial 693 error_code 11 request_code 53 minor_code 0)(Note to programmers: normally, X errors are reported asynchronously;that is, you will receive the error a while after causing it.To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)
View 2 Replies View RelatedI am trying to sort image files I've assembled for document production, and I need to be able to see the height and width of the images without having to open them one by one. Is there a way to view an image's physical size in the folder window?
View 1 Replies View RelatedI opened gstreamer-properties from the terminal. Following some directions from another thread, I changed the output to "custom" and filled in a box with a bunch of code that I didn't know anything about. I pressed "test" and it didn't work. Out of frustration, I deleted the text I had written in the box and closed gstreamer-properties. Now it won't open back up. When I try to open it from the terminal I get:
gstreamer-properties-Message: Skipping unavailable plugin 'artsdsink'
gstreamer-properties-Message: Skipping unavailable plugin 'esdsink'
Segmentation fault
That's it. It won't open and when I try to open it directly from its source folder, nothing happens at all. How can I open it back up so I can continue to fiddle with it and (hopefully) fix this blue-tint problem.
I have a newly installed Kubuntu 10.04 running here, works fine except for one thing.
I have a kind of "fileserver" and it has a samba share that I have mounted in the home folder of my desktop computer ("/home/xxx/fileserver", the server is running an older version of Ubuntu, can't exactly remember what it is but the filesystem is ext2, if that's of any importance).
I have large files on the server, mostly video. When I use Dolphin (or Konqueror, doesn't make any difference) and right click one of these large files and choose Properties, it takes a LONG time to load the properties window. As if it copies the file to local hd before opening properties, or something.
The reason why I posted here and not in the networking section is, that I had the exact same setup with my previous installation which was Kubuntu 8.04, and also at least three different Ubuntu's before that. Never had this problem before, so I think my server and networking thingies are okay.
I'm evaluating OpenSUSE and have installed 11.3 with Gnome (from the latest liveCD) and have it all running fine in a VM at the moment. We are looking at using it for an iSCSI/NFS/Samba server and have it allrunning and it is all configurable from Yast. However I can't seem to get Nautilus to play ball and allow sharing of Samba/NFS shares under folder properties (I'm fairly positive I've done this fine in Ubuntu). All I ever get is Usershare/Gnome sharing (which I believe is Webdav).
I must say I am so impressed with OpenSUSE, the partition manager is just a dream to use and everything works really well it would just be really nice to be able to share NFS/Samaba shares from the file manager. There doesn't seem to be any other file managers in the repositories so I'm a bit stuck now.
Gnome Forum have told me that changing the appearance of gdm I run: sudo -u gdm dbus-launch gnome-appearance-properties but I get this error: (Gnome-properties-Appearance: 18 047): Gtk-WARNING **: can not open display:
View 3 Replies View Relatedi got a razer diamondback 3G and button 1,2,3+weel up/down works.. but the button 4 (previous) not.
instead the button 5 (next) do previous, and button 4 don't work.
i tried modify xorg.conf but do nothing..
I use xterm with a particular font size and type. But every time I start xterm I have to give them in arguments
Code:
xterm -fa terminus -fs 12
Is there some configuration file where I can out the above parameters and xterm will pick them itself. But I don't want these properties to be set globally. Every user should be able to set it for himself. I have searched all the hidden folders and rc files in my home folder, but didn't find anyone related to xterm. What should I do? Similarly every time I start screen, I have to issue
Quote:
:caption always
:caption string %w
Can I make it automatic by editing some configuration file? Is there any way through which every xterm I start will have a screen session already open in it?
wondering if any other ppc users have had the issue whereby, after the first unsuccessful power down (or sometimes the second or third) of a fresh ubuntu 9.10 install, mouse button 3, which is normally mapped to F12, becomes function (fn) + F12.? This is really annoying as you now have to use two hands to activate the little drop down menu. So i tried remapping mouse button three to that strange little key beside the left arrow on an ibook keyboard that looks like a picnic table and which, under os x, renames stuff.
I ran "gksu gedit /etc/sysctl.d/10-arch-specific.conf" and edited it accordingly: mouse button 3 from keycode 88 to 104. It works, but i still have to press function to activate it and fn + F12 still works simultaneously (though it is no longer defined in the conf file), and my new key doesnt offer the same functionality (eg, it doesnt give spell check options in firefox where fn + F12 does). Arg. Anybody know how to make it so that i can activate mouse button three without having to press function?
I was using lucid since beta 2 without problems, but since few days I can't get a menu when I click on the right mouse button. Doesn't work on the desktop or when for example I want to rename a file using the right mouse button. Is this a bug from gnome or a new properties?
View 1 Replies View RelatedI have a 'Microsoft Comfort Optical Mouse 3000'. In addition to the regular left/right click and scroll wheel it has an extra button on the side. In previous versions of Ubuntu I was able to remap this button to act as double-click using 'xbindkeys'. However, in Lucid this no longer seems to work. X seems to know about all of the buttons on the mouse since 'xinput' lists the device as having 13 buttons and labels button 8 as 'Button Side'. However, 'xev' does not show a button event when I press the button. Instead it shows:
[Code]...
I have been trying out several newcomer browsers (using webkit) as alternatives to Firefox, which seems increasingly slow to me.Midori and Arora both allow the back button of my mouse to work, as does Firefox.However, Epiphany, which would be my first choice, does not, and I can't find any way whatsoever of configuring it to do so.I can't see why such a 'flagship' app should lack such an essential feature.
View 3 Replies View RelatedWhile Login into ubuntu, open firefox for sometime, my left mouse button usually cannot work, while right button is OK and keyboard is also OK. Mouse pointer can be moved,however left click shows no reaction(when i move the mouse pointer to some certain icon, the icon can be highlighted just as usual but left click still shows no reaction).
I doubted this may be firefox's problem, but when I kill firefox-bin and firefox process through the terminal(keyboard is ok and i can use ALT+F2 to enter gnome-terminal), Left mouse button still cannot work. And then I have to Ctrl+Alt+Delete and reboot the system. My ubuntu is 10.10, updated several days ago(this problem has been existed before the update)
Running Ubuntu Studio 10.04 with an MS wireless notebook optical mouse 4000. By default, my thumb button is acting as a "Forward" button, but I want it to be my "Back" button. I have not installed anything like imwheel, nor do I want to, especially because the button support is obviously already there, it just needs to be configured to a new command. My xorg.conf looks like this (at least the parts of it that I think are relevant,
[code]....
I have tried messing with Emulate3Buttons and the ZAxisMappings, but there were no changes. Please tell me if I am in the right place? Or is there another program or something running already that is controlling my mouse.
can nautilus be set up in a way, that it has the same right-click drag & drop behaviour like windows ? i mean, i want to drag & drop using the right mouse button, and then i want a pop-up menue like the one i get using the left mouse button and ALT.
View 3 Replies View RelatedIs there some low-level way of listing which mouse button does what in Gnome? It seems my middle mouse button is mapped to something besides a middle mouse click (button 3). For example, to move or pan in apps like Xmind or blender, you need to click on hold the MMB. The app will work like expected for a split second then stop, making it useless.
This is one of the most frustrating issues I find with Gnome/Linux/etc. There is a million places to set global inputs, but no place to find them. I have been through every control panel, every compiz plugin, xorg, gconf etc, and can't find what the MMB is set too (or any other input for that matter). I know that somewhere MMB on a window title bar will send it to the back, but can't find where that is either
Does anyone know how to configure a multi-button mouse in kubuntu in order to use the back and forward keys?
View 2 Replies View RelatedI'm using the Logitech MX1100 mouse which has a quite a few buttons. (10) I would like to use 2 of them for volume control (as I do for Windows) but have no idea how to in ubuntu 9.10. Is there any way I could map the buttons to control volume? I'm a minor noob so keep it simple.
View 9 Replies View RelatedI have successfully mapped the plus-minus key on the keyboard to emulate the Wheel/Middle Mouse Button click with this shell script run at startup:
Code:
#!/bin/sh
xmodmap -e "keycode 49 = Pointer_Button2"
xkbset m
This is so I can rotate the view in Blender without clicking the wheel, because the wheel also zooms, and it's too easy to zoom inadvertently. The remaining problem is panning, a Shift-MMB combination. Now I'm lost - how can I map a key (or better still, a Shift-key combo) to the Shift-MMB click?