Ubuntu :: Key Mapping For Shift-mouse Button Click?
Jun 21, 2010
I have successfully mapped the plus-minus key on the keyboard to emulate the Wheel/Middle Mouse Button click with this shell script run at startup:
Code:
#!/bin/sh
xmodmap -e "keycode 49 = Pointer_Button2"
xkbset m
This is so I can rotate the view in Blender without clicking the wheel, because the wheel also zooms, and it's too easy to zoom inadvertently. The remaining problem is panning, a Shift-MMB combination. Now I'm lost - how can I map a key (or better still, a Shift-key combo) to the Shift-MMB click?
I would like to assign right-mouse-click behaviour to a hardware button. I can associate a keypress, or a combination of keypresses with an "xdotool click 3" command via the Gnome keyboard shortcuts.
I have the scancode of the hardware button so can use
setkeycodes scancode keycode
to mimic any key of my keyboard. However, I don't want the hardware button to mimic a single key of my keyboard that is already in use, since then the keyboard key will also activate xdotool.
So I think I need:
- either a way to associate that particular scancode with an (outlandish) keypress combo rather than a single keypress;
- or a keycode which is not currently in use, to bind to the scancode. Are there any like that and how would I find out? In the Gnome Keyboard Shortcuts list there is stuff like "XF86AudioMedia" which I'm not using -- but does that correspond to a numerical keycode value which setkeycodes understands?
I want to be able to auto scroll by clicking my middle mouse button. In Firefox you can do this in the about:config easily, but with Google Chrome, I don't know what to do.
There is no Chrome option to allow this, so I guess I'd have to configure some stuff. Does anyone know how to do this? I really prefer Chrome over Firefox, and would like to go back to it, but can't without auto scroll.
After a forced reinstall, I find myself missing the desktop folder which I can live without. However, I reallty need right mouse button functions. How can I restore them?
just want to report "Right Mouse Click Freeze" on Ubuntu 10.10. When I click on anything with my right mouse button to open options menu it freezes and does not open menu. Sometimes when I shake my mouse left/right a bit it opens that menu, but this does not work always. It seems like xserver issue, but I'm not sure since I'm not expert in linux yet. It's very annoying issue that I would like to resolve asap.
My System Specs: Intel Core 2 Quad Q6600 @ 2.40GHz CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 800 (PC2 6400) Western Digital 250 GB Hard Drive Ubuntu 10.10 64-bit (Kernel Linux 2.6.35-22) (Used Desktop Install CD)
I have fedora 10 installed on vmware, running on win7. today when I try to start up fedora, after logging in, I faced this error: Oops! sealert hit an error! ..... there is no space left on device..... could not attach t desktop process... when I click "ok" button I just can see a black page and a mouse cursur circling forever..I really need to work with my fedora beacause i dont have any backup of my files ... btw, I allocated 8g hard disk to my machine on vmware. I don't have any idea how to boot and login from a console not a gui
I try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
on desktop, my mouse works normal. i can open programs normally, BUT, when i try to click inside some window, pointer turns into closed hand, that symbols dragging. i can move the window that way, but can't click anything except when holding shift, alt or ctrl.it's probably my fault, but i don't remember pressing anything different than usually. oh, and, it started in the middle of the session, i tried to reboot several times, tried recovery too, after that updated but no help there.i was looking for solution on google but can't find anything for days, i cant think of anything but reinstallation
About a week ago I installed some updates. What they were I don't remember. After I did that my mouse started acting up. Now about half the time when I single click it registers as a double click. Also when I click and drag to select text anywhere it'll randomly do another click screwing up that process.
So far I think the problem is when I press the left mouse button it registers the left click and then when I release, it randomly registers another left click.
The mouse itself works fine if I take it to another PC that's using windows.
OS: Ubuntu 9.10 64bit Mouse: Microsoft Intellimouse 3.0
While searching the net I found how to complete disable the functionality of the middle mouse button but I need this button for many other uses.I want to disable only it's paste action.
I know how to make another button act as the middle button but how can I map several mouse buttons to the middle button? xmodmap complains if I repeat button numbers in the pointer option.
when i click my mouse on something, it sometimes registers as two clicks. it doesn't happen all the time, but frequently enough to be annoying. for example, when i click a videos video to pause it, it often opens into fullscreen (which you normally click twice to do). also, in the url bar of chromium, i can't select the entire url by clicking. i now need to use ctrl+a. that's also because when i try to select the url, the highlight randomly disappears.
if i have multiple windows open, my click on the first "x" of the top-most window also closes the next window. i'm on linux mint 10. it's not really important, but it drives me crazy sometimes when my mouse doesn't work the way i want it to.
Code: linux-uitj:/home/anisha # uname -a && cat /etc/*release Linux linux-uitj 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux openSUSE 11.2 (x86_64) VERSION = 11.2
If I normally click the Trash icon either in Kmail or in Evolution more than one mail gets deleted in a sequential order! I have to press the click button extremely light to avoid this problem. I have confirmed this problem is not only with the Email clients but even with most other normal applications too. I have changed my mouse twice but the problem persists. Both were USB mice. Below I have provided log information :
Code: linux-uitj:/home/anisha # dmesg | grep usb [ 0.138267] usbcore: registered new interface driver usbfs [ 0.138267] usbcore: registered new interface driver hub [ 0.138267] usbcore: registered new device driver usb [ 0.396952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.396956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.396958] usb usb1: Product: EHCI Host Controller [Code]....
I just installed Ubuntu 10 as a dual boot with Windows 7. I was using it for a couple of hours (and really liking it) when all of the sudden the Ubuntu Software Center stopped responding and I was unable to click anything.
After logging out of my account I noticed I had proper mouse function. I restarted the system and noticed the same thing happening when I logged into my account.
Basically what has happened is that I have to hold the Shift key down in order to press application buttons, like "OK" and "Cancel".
If I click on a link in firefox nothing happens. I need to hold shift and left click to follow the link, which of course opens the link in a new window.
If I try to right click on the desktop nothing happens unless I hold shift.
I looked through the mouse and keyboard settings and did not notice anything odd.
trying to config compiz shift switcher for use with mouse.i want it to initiate for all workspaces by clicking the mouse wheel i know the following:
button 1 is left click button 2 is right click button 4 is scroll up button 5 is scroll down
so i assumed that either button 3 or 6 might be scroll wheel click apparently not i know that the scroll click works on my mouse in ubuntu anyone know the correct button number, or if it is 3 or 6, what i am doing wrong ?
I just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
CNEE(1) General Commands Manual says this. RECORD OPTIONS --first-last Print only first and last of multiple successive MotionEvent. So I try this. my test window is Calculator 3.14.1 cnee --record --mouse --keyboard --time 5 --store-mouse-position --first-last --stop-key h -o xnee.xns -e xnee_record.log -v;The result is, xnee.xns lists every mouse movement.But I only need to record the mouse location when there is a mouse button event. it seems --first-last does not work. How can I make it work?I use
hardware HP pavillion 20. The only avalible resolution is 1600x900. /etc/debian_version 8.1 GNOME Terminal 3.14.1 xnee 3.19
When I click on the OpenOffice button in my panel, the window comes to the front, but the focus is still on the last window; so clicking on the OpenOffice button again will not minimize it, typing will not key anything into the document, and clicking on the last app's button will minimize that one instead of switching to it. I might also ask the OpenOffice community in case this is an OO issue. I also might need to switch to AbiWord. OO is an annoying application.
I can think of a lot of different situations when being able to "autoclick" would be really useful. By autoclick, I mean that I want to be able to hold down the left-click button and have it rapidly clickity clickity clickity as fast as the processor can handle.
One example is games where I have a semi-automatic weapon and I have to hammer the mouse button with my finger. It would be nicer to reduce the wear and tear on my trackpad.
My eeepc 900 works well in general, i am very happy with it, and mostly with lucid. But I suddenly ,3 days ago, discovered that my left click button doesn't work anymore. Could it be software related?It happened on my 700 surf for a little while, but before I could really get worked up, it had resolved itself. btw my 900 is maybe old but has not till I aquired it seen much use, I doubt it could be from overuse, but then again, you never know..
I'm attempting to install lFedora 10 from a live cd. I already finished the installation process. But when I reboot to finish the post installation information I can't click the forward button to continue because the screen resolution is to low on my LCD. I can't see the forward button to click in the lower right hand corner. I found out if I just hit the enter button I got through the "Welcome" and "License Information" part but when I get to the "Create User" part after I Confirm my password the pressing the enter button doesn't work. And of course I can't see the "Forward" button to click. Is there some way to go in text mode?
1. Where do I post reports of minor bugs?2. I think I found a minor bug...When you first install Ubuntu and log in. If you of the applet thing on the top bar and click the edit button next to 'Locations' the clock preferences will pop-up.Now if you click on the general tab you will see by default that the clock applet thing should show you the time,temperature and weather...Yet if you look and the applet there is no notification of the of the temperature and weather.I tried to see if un-checking them and closing then opening them up again and re-checking would work but that has no effect.I think this is a minor bug in ubuntu and/or gnome and I would like and update and/or for Ubuntu Maverick Meerkat to correct this.
I have a home LAN server with Ubuntu Desktop edition 10.10 and I'm having a problem with remote desktop application. For now I have a monitor on that machine, but in the future it's gonna be only the box, without any periferal devices. When I try to log in via UltraVNC from Windows XP, on Ubuntu server a little window pops up, asking me to allow or refuse this "invader", so I click Allow and I really have full control on that machine. However, when I dont have any devices I wouldnt be able to click this Allow button, but will have to have full control. So, my question is how to autoclick this Allow button? Or when I try to log in the ubuntu machine, it would automatically give me full control?
I've been using this feature since Win3.1 days. Double-click the menu button on the top-left of the window to close it.It doesn't work for me right now in KDE, and I can't find any option to enable it. Googling gave a few hits of people requesting this feature in gnome, but no clear instructions on how to enable it in KDE or whether it's possible. (Though perhaps my Google-fu is just weak...)
