Ubuntu :: Can't Find A Keyboard Combination To Start Terminal
Oct 30, 2010No menu, can't find a keyboard combination to start terminal. Ubuntu 10.10 32 bit. Do I have to re-install?
View 4 RepliesNo menu, can't find a keyboard combination to start terminal. Ubuntu 10.10 32 bit. Do I have to re-install?
View 4 RepliesI would like do add a new keyboard key combination for a function like Alt + F4.
for example shift + control + s.
Up to now, i was successful with exchanging the function Alt + F4.
But I don't like to exchange, because I need Alt + f4 and shift + control + s for the function close window at the same time.
So how can I add a new keyboard combination without to exchange?
I would like to know if it is possible to assign new keyboard shortcut combinations for actions such as:
Action: switch tabs
Actual Shortcut: Control+(Alt)pgUp/pgDown
New Shortcut: Control+Tab (as it is on Windows)
Action: activate combo boxes item lists
Actual Shortcut: Alt+Down or F4
New Shortcut: still don't know yet
I have not found a way of doing this under gnome-keyboard-properties or gconf-editor.
I've recently upgraded a laptop of mine from 10.10 to 11.04 (Natty), and am having a few issues with it. I don't know how many of these are related to using Unity and how many are just due to the upgrade, but one of the main bugbears is keyboard shortcuts. I have always set the F12 key so that it opens a terminal window. I did this through the settings > Keyboard Shortcuts interface, but although I can (apparently) set this in Unity, it doesn't work. The setting is there, listed, but pressing F12 doesn't open a terminal. Neither does it if I set it to any other key.
I can create a new entry, to start xterm with F12, which works fine but this isn't quite the same as a terminal (it appears different on screen.) I also discover that CTRL+ALT+T doesn't open a terminal window either (as is suggested in a very useful list here: [URL] Have I missed something? Or am I being thick? (Quite possible ... )
Is it possible to create custom Unity Launcher that would do the same thing as pressing some keys on the keyboard.
View 9 Replies View RelatedI have this (Norwegian) keyboard layout on a HP Mini 1000 (came with US keyboard). But I can't seem to find the combination to get the ">" (or "<" for that matter) symbol/char. Anyone out there know the combination so I can finally use my netbook for other things than just simple browsing?
View 4 Replies View RelatedComputer is Gateway Netbook with Win7. I want to install Ubuntu ,but when I go to the next window after the keyboard section, I cannot find the right combination for the partition designation. I click install on a 50gb partition I made for the install. The page asks for mount points and says no root file system is defined. I put in EXT2 and a / , page told me I should have a section for a swap file. what is the correct information for these boxes? I am installing Ubuntu to learn the linux sys and I certainly don't know inough about it to come up with these commands yet.
View 4 Replies View RelatedI can't find the start command for Gnome from Terminal.
I tried:
start gnome
startx
start gne
Nothin is matching. In the Documenation is no help from console.
Recently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedRecently I've updated from 13 to 14. However, after updated I've tried to work with my terminal and it seems doesn't works fine. I can read 'starting terminal' but after that it's closed.I've uninstalled and re-installed it through the graphical tools (gnome-terminal) but that doesn't works fine.
View 3 Replies View RelatedI want to monitor my work on the terminal.I know we can use script command.But every time when I start the terminal, I have to type script to start it.I want to automate it. So where should I include this command so that it will start as soon as I start the terminal ?
MY WORK TILL NOW: I have put this "script" command in the .profile.The when I start the terminal, it became an INFINITE LOOP.I am able to "echo".Thats coming only once.....but if I write a "script" command then it is becoming an INFINITE LOOP.
I upgraded to 11.04 today and wanted to reconfigure so that I could have the desktop cube again. Once I started trying to switch my settings for the cube configuration compiz asked whether I wanted to turn off various features and apparently among them was the control bar on the side and top of the screen. Now I log in to Ubuntu and I get my workspace and that's it. No control bars, just the workspace. I need to know a few things:
1) Has anyone else had this problem?
2) How do I get into the terminal from keyboard commands?
3) What terminal commands do I need to bring back at least the main toolbar so I can access programs.
My laptop screen broke (smashed) a while ago and I have been using Windows with an external monitor on it ever since. My main laptop, however, runs Ubuntu 10.04 which I prefer immensely so I installed it on my broken laptop in dual-boot with Windows. Everything was fine at first, it loaded by default into a dual-monitor mode, but that was easily changed to just the single external display.
The problem was when I installed the graphics card driver (a Nvidia one). It seemed to reset the configuration to just using the laptop's broken built-in monitor. From what I can tell, there is nothing wrong with the driver as the OS seems to be running fine (from the small corner of the screen which still works). Unfortunately, neither the FN-F4 key combination (which never worked on Windows either) nor unplugging/reinserting the HDMI cable resets the screen setting to let me use the attached monitor.
So my question is whether there is anything I can do using the full-screen terminal (CTRL-ALT-F1), or a keyboard shortcut, to change monitor or go to dual-monitor mode. I would prefer not to use it to just disable the graphics driver because the laptop is a Samsung r780 and the only reason I really want to use it is its great graphics card which is way better for editing stuff and 3d tasks than the old replacement I'm using at the moment.
I'm unsure as to how I can use keyboard shorts to close the current tab or to switch between tabs. Does anyone know them or know any other keyboard-based options for using the terminal in AWN? I can open a new tab by ctrl+shift+t but ctrl+shift+w doesn't work and i've never known how to switch between tabs
View 4 Replies View RelatedTrue terminal is: ctrl + alt + F1-F6, F7 to exit if you don't know what i mean by using true terminal term. My keyboard work everywhere else.
View 3 Replies View RelatedI have Ubuntu Natty installed and I'm using German keyboard layout. If I try to change using CTRL-ALT-F1 into terminal then I have US keyboard instead of German. Howto change keyboard layout in the Terminal?
View 2 Replies View RelatedIt does in jaunty.....
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Have strange problem when I get asked for my password in the terminal, the keyboard stops working, below is a sample of the terminal window.peter@peter-desktop:~$ sudo ufw status[sudo] password for peter:When I press the keyboard nothing happens.
View 2 Replies View RelatedI would like to make a keyboard shortcut to execute the following command:
Code: /usr/bin/xdotool key XF86MonBrightnessDown The command, when run from a terminal, works perfectly. However, when run via a keyboard shortcut, the command fails to execute. how I can execute my command with a keyboard shortcut. I am running Ubuntu 10.10 Netbook Edition with Unity-2d.
I'm using Xubuntu 10.04 Lucid Lynx, and I'm trying to setup a keyboard shortcut for xfce4-terminal. I've read a million threads and articles telling me how to do it (go to settings >> keyboard >> application shortcuts tab and click add), but when I open that interface there is no "add" button, although the interface is a table that impliesn in its appearance that things can be added to it.
View 3 Replies View RelatedHave strange problem when I get asked for my password in the terminal.Using Ubuntu Lucid 10.04. I was typing : sudo ufw status. When the keyboard asked me for my password then when I went to type in my password nothing typed.When I press the keyboard nothing happens. Just started today.
View 1 Replies View RelatedI am working on a Dell Inspiron 9400 with 9.10 installed and (thus far) working quite well. However, when I type in a command into Terminal (I was trying to install Amarok), the terminal asks for my password and the entire keyboard stops working. As in, I can hit any numerical or letter key, and nothing happens in the terminal but the blinking cursor. The specific command was "sudo apt-get install amarok", and then it asks for my password, and I'm not able to make an entry.
I've tried changing to a couple of the different Dell laptop keyboards in System>Preferences, but again, before typing the command into the terminal, everything is working fine (inside AND outside of the terminal). After the password prompt comes up and the keyboard stops working in terminal, all the character keys still work fine still outside of the terminal.
How do you enter your password terminal the keyboard doesn't work when I try
View 2 Replies View RelatedAfter a while away from Linux, I recently installed Ubuntu 10.4 on my home PC. Here is the problem: The terminal STINKS in general. Unfortunately, it appears that nothing has changed in the last 3 years in this particular area. I remember now that the terminal (keyboard mappings, colors) was one of the reasons I went with Fedora for my home PC a few years ago.
Short question: WHY is Ubuntu's so different, and why hasn't it been improved? I have a standard 104-key keyboard, yet when I try to edit with VI, the arrow keys don't map properly. You'd think that user feedback alone would have fixed this over 3 years time. Anyhow, how do I fix it?
The white background, minimal color terminal isn't very good. But I really need help getting the various keys (delete, home, end, arrow keys) to map properly. I went with Ubuntu because it seemed to be more ready "out of the box" and I don't need cutting edge like Fedora offers. I wanted more stability, etc.
I generally use gnome but with latest hulla-boo about graphics tempted me to check kde. where i found following problem to configure:
1) no keyboard shortcut to launch a terminal
2) my laptops dedicated volume control is not working
3) gnome package manager is not there, though i can use yum
I am trying to start a script via a keyboard shortcut.The trouble is, it runs fine when i start it from the terminal, either by opening a terminal and starting it there or by "double-click", but when I use the shortcut it loads, but doesn't work properly. This is probably because it asks for user input, which would be put in the terminal window.Is there a way to start a script in a terminal window by default?
View 2 Replies View RelatedIs there a way to add a keyboard shortcut for a terminal command in OSX. Basically most of the times i open the terminal app in MAC in order to ssh into a certain server foo. What I want to do is add a keyboard shortcut (say ^k) so that on a terminal when I do that, it runs "ssh foo" in the terminal.
View 4 Replies View RelatedHow to turn off linux terminal keyboard sound? I do not have admin access and I use kde3.3 redhat.
View 3 Replies View RelatedIs it possible to configure the shell [in xterm, tty, whatever] to recognize custom shortcuts? That is, can I bind any program to Ctrl+X, Alt+X, etc. shortcuts? I know how to do this with Gnome/KDE/Fluxbox, but I'm interested in doing it on a shell.
View 6 Replies View Relatedi installed linux ubuntu 10.04 successfully.it only works for a few minutes then the mouse and the keyboard start to stop working, they completely freeze then i have to restart the computer.
View 1 Replies View Related