Ubuntu :: Broken Package Manager - Samba Stopped Working
Aug 7, 2011
Whenever I try to install something with apt-get, I get a list of errors. Most of the time, the package I want to install gets installed anyway. However, this time samba stopped working, and I discovered that it was no longer on my system. I'm not sure how this happened - I haven't tried to remove it. So, I tried to reinstall it with 'apt-get install samba'. This time, the package did not install, and I got a long output from the terminal:
[Code]...
View 9 Replies
ADVERTISEMENT
Sep 1, 2011
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies
View Related
Mar 25, 2011
I'm sorry if this topic has already come up, but My package manager is broken, and when I press repair, it says it can't repair because the package manager is broken. I'm pretty sure the code is
Code:
sudo apt-get install -f
View 4 Replies
View Related
May 4, 2011
doing a new install of ubuntu 10.04.2 on a computer
without the boxes to check in the other software tab, i cannot install needed software, my simply shows BLANK no matter what i do:
and yes, i already checked all boxes in the Ubuntu Software thread including restricted.
This is what appears on my screen in synaptic package manager, BLANK?
This SHOULD appear by default, without doing anything, even in a freshly installed system, these boxes should appear by default:
View 1 Replies
View Related
Apr 29, 2011
After Upgrade to natty everything went well except my package manager is now broken and I keep going around in circles; Update manager gives me a list of six updates that are downloaded but not installed. When I try to install, It returns;
[Code]...
View 2 Replies
View Related
Dec 8, 2010
I just installed brother DCP-350c drivers from here
When I finished I tried to install a scanner driver from brother.
My package manager is broken.
The page mentioned something about that here(just a scroll down)
I tried what they said but the manager is still broken.
It gives me this error report code...
View 3 Replies
View Related
Sep 30, 2010
It started with Update Manager constantly recycling and not updating. When it starts it shows 295 files and 308MB waiting to download. When I click on 'Install Updates' it appears to go through the process, and then presents me with the same 'waiting to install' window again - and again, and again - in fact as many times as I care to click the 'Install Updates' button. No error messages appear. The 'Settings' button produces the same apparent process as the 'Install Updates' button, but doesn't present me with any other screen.
I've tried all the solutions I could find on these forums and nothing works. The sudo suggestions for Terminal usually produce error codes. adjusting a line in the 'hosts' file. When I tried this I was presented with the obstacle of not having access to the read-only file, and no matter how much I searched I couldn't find how to gain access . While investigating all these possible solutions, I was directed in turn to the Software Sources and Synaptic Package Manager applications, but when I attempted to start them, 'Starting Administrative Application' appeared briefly on the taskbar - and then disappeared!
View 7 Replies
View Related
Oct 18, 2010
I was SSHd into my laptop which is right next to me, then it lost battery power and turned off. When I switch it on, I can't FTP, SSH into it and the Network Drive (Samba) won't work.
View 1 Replies
View Related
Jun 17, 2011
Been searching for hours and looked at several other threads but still can't figure this out. We have 4 folders being shared from a Ubuntu 10.4.2 LTS Server using Samba. A couple days ago two computers in the office lost access to these shares. The other computers in the office are fine. So far as I know nothing has changed on the server. I can putty into the server still but I can't map a drive or open a window through run (\server_nameetc).
I've also tried disabled iptables on the server and windows firewall on the the windows xp machines. Still no luck. What am I doing wrong? Like I said, so far as I know there have been no changes to the server whatsoever. One day it was working and the next it just stops.
View 3 Replies
View Related
Nov 9, 2010
I forced the install of graph-tool package [URL]. Now it is of course tagged as broken, so update manager wont do anything. But I want to accept it, I know it is not really broken. (In fact, graph-tool_xxx.deb asks for libcgal4. squeeze only has libcgal5, so I am betting this is not an issue, as far as graph-tool is concerned.)
View 2 Replies
View Related
Jun 21, 2010
The problem seems to appear with the following packages:openoffice.org-commonopenoffice.org-coreant it said before that the broken package is python-uno.I uninstalled openoffice completely and now when I try to install it again from synaptic, it goes:
Code:
E: /var/cache/apt/archives/openoffice.org-core_1%3a3.2.0-7ubuntu4.1_i386.deb: short read in buffer_copy (backend dpkg-deb during `./usr/lib/openoffice/basis3.2/program/libfrmli.so')
[code]....
View 6 Replies
View Related
Aug 16, 2010
I recently upgraded to 11.3 and must say am highly disappointed. Between the multitude of problems, and sudden lack of long standing tools ( Sax2, system repair, loss of functionality in software installer), this to me has been a major step backward.
Now I have found out Samba as well has stopped working, sort of. I can still copy from windows share to my Suse box, however copying from Suse to the windows share now results in an error, the details for which just say invalid argument. Also note there are no logs in /var/logs/samba so I don't really have a clue whats happening.
View 5 Replies
View Related
Sep 13, 2010
I run Samba version 3.4.7 as a Domain server for our company, and recently we reorganized our IP-addresses. And the Samba server also got a new IP-address. (192.168.1.60 -> 192.168.1.22). However, now new computers can not join the domain, and old ones can not connect to it correctly (they get a temp profile).
Windows XP gets a temp profile when connecting, and when trying to join a domain I get this error "A domain controller for the domain HAWAR3 could not be contacted. Ensure that the domain name is typed correctly. If the name is correct click Details for troubleshooting".
When trying to connect Windows2008R2 (already a member) it says:
"There are currently no logon servers available to service the logon request."
My guess is that is is some problem with WINS or something.
View 2 Replies
View Related
May 20, 2011
I have installed Samba 1.2.63-0Ubuntu4 (system-config-samba) on Ubuntu 10.04, and it has been working without any issues for a few months now, but now the username/password authentication does not work anymore and I can't figure out why
I have tried changing username/password(thinking maybe i forgot the correct credentials) and the new username/pass does not work either.
I have also tried "sudo service smbd restart" in terminal to restart samba but this does not work either
I can still see visible shares when browsing server via "network neighborhood" on XP,,, and can access the shares that do NOT require authentication
username/password are made up of standard characters as well
View 2 Replies
View Related
Oct 14, 2010
Update manager has stopped working under Maverick. Is it best to format disk and reload the system anew or does anybody know of a fix?
View 2 Replies
View Related
Jul 26, 2011
My network manager application went missing a few days ago. I enabled it by right clicking on the taskbar above and opting for "show". It reappeared and worked fine. After I rebooted, however, it was there ok, but it doesn't respond to clicking at all. It has stopped working.
View 1 Replies
View Related
Nov 25, 2010
Right so yesterday my internet worked fine. Today - no connection at all. The light for my cable on the router doesn't even show up. I originally had indicator-network installed, so when the internet first stopped working, I tried a few other options such as tethering to my phone via usb and bluetooth (which I have successfully used in the past). However, these didn't work, and I figured that as connman is still in beta, maybe that was why. So I reinstalled network-manager and network-manager-gnome via a usb stick, uninstalled indicator-network, and rebooted the computer. Still no internet.
When I click on the applet, it says "No network devices are available". This is odd, as I definitely have a network device... it is part of the motherboard. So I thought I'd do the SMARTlan test or whatever it's called. It's part of my BIOS, so I ran that and it returned results that I (kinda) expected: when the cable wasn't plugged in, it returned one set of results. When it was only plugged into my computer (and not the router), it returned another set of results. And when it was plugged into both my computer and the router, it returned a third set of results. So that leads me to believe the cable itself is fine.
And when I move the cable to a different port on the router, nothing changes. The corresponding light still doesn't come on. Network-manager, telling there are no network devices. The BIOS can see the ethernet port and the cable. And the router is functioning perfectly for my parents' computer and my ps3. And I have checked the cable to my computer for physical damage - it follows the same path as the one to my ps3, and on top of that, nothing physical can possibly have happened to it in the last day. This happened once before, except I don't think the network devices were lost.
View 2 Replies
View Related
Jan 5, 2010
I'm running Kubuntu 9.10 (Karmic), and my System Monitor (a.k.a. Task Manager) has stopped working. I had been using the graphical version of the app because it was easier and faster for me to deal with. I know that there is a command line solution for this, but I also know it involves having to know the task number of the program I want to kill (I've got a game that I love to play, but only closes cleanly about 10% of the time). I've posted a couple of screen shots to show the errors... The first one is the error message itself (I have to hit 'OK' on this twice to clear it), and the second one is the resulting empty window of the System Monitor
View 5 Replies
View Related
May 18, 2010
I did a clean install of Ubuntu 10.04 on a Toshiba Satellite, Intel graphics card, a few days ago, and had no trouble accessing the CompizConfig Settings Manager. I changed a number of settings, and everything seemed to be working just fine. But two days ago, I noticed that the compiz effects (rotating desktop cube, minimize effect etc.) were gone; and when I now try to access the Settings Manager, I see a "Starting CompizConfig..." appear in the panel and linger for about five seconds; then it's gone. No settings manager, no error message.
The day that happened, I had (to the best of my memory) not installed any updates. I had, however, removed a bunch of applications through the Software Center. I had also launched Ubuntu Tweak and changed a couple of settings. The only option it showed, and shows, under 'Compiz Settings' was then (and still is): "Prerequisite Conditions" : "Install Advanced Desktop Effects Settings Manager". The box was checked. I have since unchecked and re-checked it, thereby uninstalling and re-installing the settings manager. But that hasn't changed anything.
[Code]...
View 9 Replies
View Related
May 10, 2011
I'm running 10.10 and cannot seem to figure out why apt-get is not working.
It will generally get to the point where it should be unpacking the replacement, but it just hangs there. I have looked to find a way around that, but right now, I'm still looking at
Code:
Unpacking replacement libperl5.10 ...
I've had to sudo kill -9 dpkg and apt-get and delete the lock in /var/lib/dpkg/ which may have caused more problems... It seems like the problem started when I attempted to upgrade my version of Flash.
View 9 Replies
View Related
Jun 14, 2010
I can't open Package Manager and install or remove anything...this is what it says:
"The error message was:'Error:Opening the cache(E:Encountered a section with no Package:header,Eroblem with MergeList/var/lib/apt/lists repository.akirad.net_dists_akirad-karmic_main_binary-i386_Packages,E:The package lists or status file could not be parsed or opened)'This usually means that your installed packages have unmet depencies.
View 6 Replies
View Related
May 21, 2011
When I try to open SYNAPTIC PACKAGE MANAGER in my ubuntu 11.04 version, it is showing error. Following error is being displayed:
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_natty_main_bina ry-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.
View 1 Replies
View Related
Jan 16, 2010
After installing the 'getdeb' and 'playdeb' debian packages that automate adding those repositories for [URL] my synaptic package manager started acting up giving me this error: ould not download all repository indexes The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. Problem executing scripts APT::Update:re-Invoke '/usr/bin/daptup --pre'Sub-process returned an error code I am a long haul 48 state truck driver and it may be a couple days between replies until I can get to the next Wi-Fi hotspot.
View 3 Replies
View Related
Mar 30, 2010
Worst combination ever.. To fix "no wubildr" I have to use synaptic package manager. To use synaptic package manager I have to access recovery mode, which the "no wubildr" problem is not allowing me to. Is there anything else, than reinstalling ubuntu, I can do?
EDIT: the terminal is not working either.. Segmentation fault:/etc/sudoers is mode 0666, should be 0440. That is why I am unable to use the synaptic package manager.
View 4 Replies
View Related
Apr 15, 2011
i have windows 7 on my laptop and I wanted to install Ubuntu but I had problems with the partitions so I installed Wubi. It looks just the same as ubuntu, but I tried to find some programs in the synaptic package manager (like Kile or aMsn) but the manager is not finding anything I search for.
View 2 Replies
View Related
Jan 29, 2010
I just installed ubuntu 9 and I went to package manager to install aircrack-ng version 1:1.0-1 and it says that it has installed but then when i go to applications/internet/aircrack is not shown.
View 1 Replies
View Related
Jul 31, 2011
I have recently upgraded to Ubuntu 11.04 from Ubuntu 10.10. After the upgrade, I wanted to do a system cleanup using Synaptic Package Manager. After, I have marked a package for removal, the "Apply" button is still shaded, i.e., I am not able to click the "Apply" button. The "Apply" button is still not functional even I am able to download and install packages.
View 2 Replies
View Related
Jul 29, 2009
I'm trying to get a package manager working on my new VPS.
I didn't set it up The machine is running Fedora Core 5, so I came here.
Quote:
First I tried:
Quote:
What am I not doing? Then I tried compiling an older version from a tarball:
Quote:
Unfortunately when I entered "make" I got:
Quote:
So I googled and apparently I'm missing gettext too? So I downloaded that...
Quote:
Which is confusing as I thought I installed GCC a while back. Edit: Guess not.
Quote:
View 6 Replies
View Related
May 21, 2010
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies
View Related
Jun 15, 2009
I ran "yum update" on 03-06-2009 and it updated my samba version from
3.2.8-0.26.fc10.x86_64
to
3.2.11-0.30.fc10.x86_64
My network shares then became read only!After some digging it turns out my system is not working because of Samba bug 6291, the "force user" option is no longer working.
Ideally I would run another "yum update" and that would fix the problem. Apparently the bug has been fixed in Samba 3.4.0pre2 - when can when we expect that to be released and included when I do a "yum update"?
Alternatively how do I get back to version 3.2.8-0.26.fc10.x86_64 ?
View 2 Replies
View Related
