Ubuntu :: Add Custom Emblems In 9.10?
Jan 28, 2010
I wanted to add some custom emblems so I could label my folders more effectively and after a little bit of work, I figured out how to do it and I thought I should share that info with the group. The first thing to note is that the emblems are stored in the folder /usr/share/icons/gnome/32x32/emblems. The first problem you are going to run into is that you don't have permission to add files to this folder. The way I got around this was by changing the owner of the folder to myself. I am using a computer for recording, so my user name is "band." Change that to your user name.
Code: sudo chown band "/usr/share/icons/gnome/32x32/emblems" After you do that, you can paste your icons (I would use the .png format) into the folder. Next, you have to resize your icons so they are 32x32. You can do this by right clicking on the image then Open With > Gimp Image Editor. When Gimp starts up, go to Image > Scale Image. Change the width to 32. If your image is square, it will automaticly change the hight to 32. If it isn't then you can either force it to be 32 by unchecking the chain icon between the width and height, or you can resize the layer so it fits within 32x32. Then File > Save. If it is not a .png file, I would use Save As and save it as a .png by replacing the current format (.jpg, ect.) to .png. The Gimp will automaticly change the settings so it save it to the right format. I know for some of you these steps were obvious, but I thought I should help people out who aren't too familiar with the terminal or with the Gimp.
View 3 Replies
ADVERTISEMENT
Feb 16, 2011
I have recently installed Faenza icon theme and just began to notice the inconsistency of icon emblems being displayed by compiz.Attached image shows the emblems of Chromium, Nautilus and Comix are that of the default icons, while Empathy andCompizConfigSettingsManager displayed the custom icon correctly. The dock displays all apps' icons correctly though.The issue does not occur exclusively to Application Switcher (Alt+Tab), it also occurs with Scale (Super+W), Shift Switcher (Super+Tab).
View 8 Replies
View Related
May 1, 2011
I just upgraded to Natty, and while U1 is working, it no longer changes the files & folders emblems according to the status of the item (not synchronized, doing synch, synchronized). I'm searching for hours and found nothing on that.
View 1 Replies
View Related
Jul 16, 2011
In my orig. post I did not state that I was now using gnome in Ubuntu 10.10.I have "light sensitive eyes" and I have to be able to change the back ground colors from white to dark in such programs as Nautilus and editors. This is the main reason I've used KDE for years, it's very easy to change in KDE. I have read the help from:(http://library.gnome.org/users/user-...mblems.html.en) and every thing I can find "here" on changing the background colors to no good. Heres whats happening:I open Nautilus>Edit>Backgrounds and EmblemsI select Patterns>Drag a pattern title to an object to change itBut it don't work. I've tried the same thing with "Colors" and itdon't work.I have dragged using right mouse button, middle button, and left button and they don't work
View 6 Replies
View Related
Oct 17, 2010
Well I was curious to try Nautilus Elementary from its PPA. The install was fine, but the search function was broken. After having issues removing the PPA and my package manager having errors I have old Nautilus back, but without its old Backgrounds and Emblems in the Edit menu. I tried doing remove completely of Nautilus and its related packages but I don't have the old nautilus back as I need it.
I don't want to have to reinstall everything just for one application, as it means configuring settings and installing the rest of my apps all over again.
View 1 Replies
View Related
Sep 15, 2010
I've recently acquire a new HDD and I've decided to use it for multimedia files.
So I've edited my fstab so it mounts this disk at startup.
What's more important, I've bind the folders in that disk (i.e. media/theDisk/Music) to a folder in my home directory (i.e. /home/me/Music) so I can have all the folder mounted at home (Mount the disk in /home/user is not possible because Nautilus start to whim about not being able to set some files in .nautilus or something, I believe its because it does not know which disk to save to or something like that)
So everything works fine, except for folder icons. When I open the home directory, all folders in the disk are shown with the Desktop default icon. Even if I change them (whether from home or from the mounted disk) the next time I open the home directory they are shown with the Desktop icon. Emblems are lost too.
View 4 Replies
View Related
Jan 30, 2011
my folder emblems just stay grey. I don't know what it is I did that caused it but when I try to change the theme the folder emblems just stay the same (grey and simple) but it looks different on my panel.
View 1 Replies
View Related
Aug 26, 2010
I already posted a link in the ubuntuusers.de Forum (german) [URL].. But I haven't found a solution yet. The problem is, that I wanna set an Emblem in Nautilus via a Script that is called by cron. The problem happens in that line
Code:
/usr/bin/gvfs-set-attribute -t stringv /path/to/file metadata::emblems minus14
thats the error: Error setting attribute: Setting attribute metadata::emblems not supported
I already tried to call the script via /etc/crontab and /var/spool/cron/crontabs/meles, i tired it with
Code:
/path/to/script
[Code]...
View 2 Replies
View Related
May 8, 2011
I've been an ubuntu user for a while, and just started trying out fc15. In nautilus, there used to be an "emblems" side panel, as well as an emblems tab in the file properties window. (emblems being the little overlays you could assign to files or folders, like a tick or a cross or a smiley fdace or whatever). Is there some package I need to install to get this functionality back? Has it never been present in fedora, or is it a change in gnome3 / fc15?
View 1 Replies
View Related
Dec 28, 2009
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
View 1 Replies
View Related
Oct 26, 2010
I am currently in the process of moving around 20TB of data from one server to another. Security is not a concern, since the data are freely available to anyone on our network anyway. There are a couple of things that I'm trying to decide on:
(1) protocol choice
Of all the choices I have--nfs, ftp, scp, rsync, samba--has anyone done any benchmarking to show which would be the fastest/most robust transfer protocol? I know nfs has slow write speeds for synchronous transfers. Asynchronous would be faster, but less robust. I'm leaning toward rsync since it performs md5sums to confirm the file transfers. (Remember if there's a 1 in a billion chance that a byte will get corrupted, then I'll have 20,000 corrupt bytes in the transfer.)
(2) Nautilus emblems
We use emblems in Nautilus to categorize files. The old and the new server have the same directory structure.Is there any way to copy the Nautilus emblems from the old server to the new server. What I want is that if a user had marked a particular file with a star on the old server, then that file would be marked with a star on the new server when he/she logs in.
View 1 Replies
View Related
May 21, 2010
I want to create a custom ubuntu ISO (This ISO will contain all the packages with the latest updates released till date).
View 9 Replies
View Related
Jun 11, 2011
I have several DE, actually 5, and I want everyone to have custom start up. for example -wicd (daemon) and wicd-gtk to start up when I log in to 'awesome' ,'xfce4'and 'ratpoison'and the standart ones for gnome and kde.(btw, it's all happening in Arch linux, but I guess it's not a big deal)
View 4 Replies
View Related
Feb 9, 2010
I'm purchasing a new laptop and considering the Dell XPS 14, customized.
Specifically, its customized to the sheet I've attached as PDF. The parts I'd assume are most important for Linux hardware compatibility, are:Processor: 2010 Intel CoreTM i5-430M 2.26GHz (2.53GHz Turbo Mode, 3M cache) Video Card: Intel HD Graphics. Wireless NIC: Intel Centrino Advanced-N 6200
Does anyone have any warnings about any of this hardware? I'd like to make sure I'm not going to run into any more issues (as I have personally, in the past) with drivers being crappy because the manufacturer refuses to open up to the Kernel Dev. community.
if you're looking at the PDF, then obviously ignore all the software garbage that Dell throws in (eg. MS Windows 7, Adobe, McAfee).
View 5 Replies
View Related
Mar 6, 2010
I am in the tasks section of the following tutorial [URL] I did the list package thing to see what packages there are. However now I cannot leave the list in order to run the purge command. How can I get back to the previous section so I can remove packages from the custom live cd. I want to make sure I am editing the live cd and not the current install. I am going to make two images. One cd that will still have a gui but I plan to build as a recovery tool. The other one is a dvd and will be for installing everything I want on any machine. I am doing the tutorial with Karmic. Also I have cursors, themes and icons I installed from gnome look. I then went to customize and created my own personal mix I like. I would like to make this a standalone theme and come as the default theme on the live cd and dvd. I have no clue what I am doing, however wish to learn to build my own custom live cd. Also I would like to know how to ad repositories to the live cd and how to add programs pre installed that are not usually included.
View 2 Replies
View Related
Mar 12, 2010
What I am going to tell you has worked for the Alternative Ubuntu ISO but I would like to see if I can do this for the Server Ubuntu ISO. I need to pass along some ideas as no one else seems to have tried it this way on this forum (other have been using preseeds but I don't think this way).[URL]Copy files from the mounted ISO to my HDD: cp -rf /mnt/ubuntu/* /opt/ubuntu-server/Once the files were on my HDD, I started to edit files that would help using a special preseed I wanted to configureI changed directories to /opt/ubuntu-server/preseed/ and created a file called test.seedI edited the test.seed file with the example found here:[URL]Saved it and changed directories to /opt/ubuntu-server/isolinux/Started the edit the text.cfg (holds the labels for installing ubuntu)Here is what I appended to the end of the file:
---
label test-install
menu label ^Install Test Ubuntu
[code]....
View 3 Replies
View Related
Apr 2, 2010
I wasn't using my laptop for at least a few hours, but when I looked at it, it had seemed to crash. I am hoping to figure out what caused this, and to prevent it from happening again. I believe it has something to do with drm or b43 as that is what I could decipher from the screen. I have checked some logs and found nothing irregular. I do not want this to happen again. I am running kernel 2.6.33.1 with no patches and a custom config tailored to my processor. The reason I am running 2.6.33.1 is because of support for my Wifi.
View 5 Replies
View Related
May 9, 2010
For a long time I've used a custom xsession that loads Mythtv without any sort of desktop environment. Every time I upgrade I've just backed up and restored my xsessions entry. I did the same when switching to 10.4 only to find that the custom xsession entry causes gdm to login WITHOUT a password.When I select the custom xsession in GDM I get logged in immediately without a password or confirmation. The expected behavior is that I'd select the xsession and not get logged in until after entering my password. I've done some trial and error with this issue and it seems that it boils down to a single line in the custom xsession file.
View 4 Replies
View Related
Jun 11, 2010
Just installed latest ubuntu,
I want the "system monitor" to pop up on ctrl+alt+delete, I'm still damaged from long time on windows ^^
Anyways this is what i have done:
1. system > keyboard shortcuts
2. made another shortcut for "log out" (is ctrl-alt-delete default)
3. then "add" name=Ctrl-Alt-Delete and command=gnome-system-monitor
Now my new custom shortcut is disabled. How can i enable this?
View 2 Replies
View Related
Jun 11, 2010
I'm sure this is possible to do, but how do I create a Ubuntu install cd that uses my current config. Ideally I would like to be able to install exactly what I have on my system now, without user files. Wine, Ccsm, amarok, audacity, themes the whole nine yards. I tried using a program called Ubuntu Customization Kit, but it wouldnt let me mount the normal ubuntu install .iso file. This would avoid the hour and a half post-install config every time I screw Ubuntu up as well as stripping off many of the programs I don't need...
View 3 Replies
View Related
Jun 17, 2010
Preload notes the applications I open frequently and preloads them for faster app. startup.
But is there any way in which I can add my own files to preload
View 2 Replies
View Related
Jun 18, 2010
I recently correctly installed a cursor theme in ubuntu 10.04. When I move the pointer around in a window the theme appears but when I move the pointer around on the desktop i changes to the default theme.
I think it's something with compiz because when I shut it down the theme appears on the desktop...
View 4 Replies
View Related
Aug 1, 2010
I would like to try and optimize my kernel a bit. Since I am doing this on a fresh install, I don't really care if the os gets bricked in the process, and I am sure I can bring it back if I can boot into a recovery console from the old kernel. So, I followed thispost. I patched it and copied and edited a config file from /boot/, saved it as .config, I tried it several times with both removing and not removing /debian and /debian.master directories from the source, yet I always get the same error when I run "make oldconfig".
Code:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*** Error during writing of the kernel configuration.
make[1]: *** [oldconfig] Error 1
[Code]...
View 1 Replies
View Related
Aug 31, 2010
I want to create a custom live cd of off peppermint os one. I want to add specific software, and delete some packages i don't really need. How can I do this Reconstructor is not what i want, because i am forced to use Ubuntu or Debian,
remastersys doesnt work for me since I see no option in using peppermint one as a live cd.
View 6 Replies
View Related
Sep 10, 2010
I want to create a LiveCD that you can boot and where instead of the normal Ubuntu installer (ubiquity) my own installer is starting.
I tried to do that with FAI, but I have many problems with it. Do you know a good way to do it? Is there an Interface for the Ubuntu installer/Source Code? Any other tools, ideas or thoughts?
View 1 Replies
View Related
Nov 18, 2010
So, when I play Java games, Sun Java will use default cursor set instead of custom cursor set that i have selected. So, where is the problem? I can see the difference if I start that java game to window, and move my mouse from not-window to window :/
Very annoying, because i would need that custom cursor for that game
View 2 Replies
View Related
Feb 17, 2011
the archive manager in ubuntu uses default settings for archiving files into .7zip
s. but much more compression can be achieved setting the cmpression level
higher from command line. Is there a way I can set that settings as default in Archive manager?
View 5 Replies
View Related
Apr 27, 2011
how to make a live cd how can I put it on a usb stick. [URL] Also in the article you install skype etc. but where did they get the path to donload skype etc. I might want to add more software.
View 9 Replies
View Related
Jul 4, 2011
I'm working to setup an small PC as a kiosk, I was able to create an USB pen drive with ubuntu 10.10 with a persistent area and I made all the changes I need, everything works but if the PC loss power in most of the cases the file system is corrupted. Now I'm trying to generate a non persistent USB drive, but I'm having some problems. I was able to install remastersys and create an ISO image of my system (dist) but when I tried to create the USB drive using different Programs, in all cases I get the boot menu but it never complete the login, it just try to keep booting. The only messages I saw when I create the iso image is a bunch on chown operation fail from remastsys, I'm not sure if it is part of the problem. how to create an USB read only from a persistent one ?
View 2 Replies
View Related
Jul 16, 2011
I am using Natty in Classic Gnome mode with a custom icon set, Awoken. It is doing fine, but an upgrade was released a few days ago and the installation fails:
Code:
Preparing to replace awoken-icon-theme 2.0~ppa1~natty2 (using .../awoken-icon-theme_2.1~ppa1~natty1_all.deb) ...
Unpacking replacement awoken-icon-theme ...
[Code]....
There is a page for awoken-icon-theme package on Launchpad, but I cannot find a way to submit a bug on it. If I try "ubuntu-bug awoken-icon-theme", it is rejected because it is not an Ubuntu package. I understand that. Should I try to contact the developer directly?
How can I resolve this error and get the upgrade installed?
View 3 Replies
View Related