Ubuntu :: 9.10 Custom Kernel V.2.6.33 Crash?
Apr 2, 2010
I wasn't using my laptop for at least a few hours, but when I looked at it, it had seemed to crash. I am hoping to figure out what caused this, and to prevent it from happening again. I believe it has something to do with drm or b43 as that is what I could decipher from the screen. I have checked some logs and found nothing irregular. I do not want this to happen again. I am running kernel 2.6.33.1 with no patches and a custom config tailored to my processor. The reason I am running 2.6.33.1 is because of support for my Wifi.
View 5 Replies
ADVERTISEMENT
Jan 24, 2010
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies
View Related
Oct 31, 2009
I'm running CentOS 5.3 and would like to know what the "best" or "proper" method is to build a custom kernel using the generic kernel sources from kernel.org. Most of the references I've found talk about modifying the current CentOS kernel using the RPM way. I really want to have the latest kernel due to some important security issues that haven't been addressed in the current CentOS 5.3 kernel.
View 6 Replies
View Related
Aug 31, 2010
I write the network driver. Transmission of packets in user space I do through netlink socket`s. In user space there is a handling of packets and their transmission on other device (however, it isn't important).
Problem in that any time, packets through the driver in system, and is reverse, are transferred normally. But then there comes the moment when the kernel crash. If to look in syslog it seems to me that comes deadlock. Also I think that it is related with netlink socket`s.
I can't find the information on that anywhere how correctly to use netlink socket`s in kernel space. Can at you will any a reason into the account of synchronization of sockets and the driver in kernel space?
I can give the driver code if it is necessary.
View 2 Replies
View Related
Aug 1, 2010
I would like to try and optimize my kernel a bit. Since I am doing this on a fresh install, I don't really care if the os gets bricked in the process, and I am sure I can bring it back if I can boot into a recovery console from the old kernel. So, I followed thispost. I patched it and copied and edited a config file from /boot/, saved it as .config, I tried it several times with both removing and not removing /debian and /debian.master directories from the source, yet I always get the same error when I run "make oldconfig".
Code:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*** Error during writing of the kernel configuration.
make[1]: *** [oldconfig] Error 1
[Code]...
View 1 Replies
View Related
May 28, 2010
I've about 5.5GB of free space....whenever I try to compile the kernel my system runs out of space...says zero bytes remaining maybe I din't configure it that well I cant exactly figure out which drivers/modules I need in order to obtain a working kernel.
View 8 Replies
View Related
Dec 22, 2010
All I want is a lxde based desktop to play with and tweak. The problem is that I am using rather esoteric hardware. An xcore86 device on chip to be precise. I have a custom kernel in deb format, and I managed to install UNR 9.10 and then install the custom kernel. Strip out as much obvious gnome stuff and install an lxde desktop. Now this is a quite good solution but still leaves me with a lot of junk that I am not sure I need. 2 ideas occurred to me. Install lubuntu and then install the custom kernel(this failed to work because lubuntu's kernel refused to play nicely with the xcore) or do a minimal install and work my way up adding the things that I wanted. (Again this ground to a halt when the screen went blank)
I looked at unetbootin to try and put in a custom kernel but to a novice like myself it did not work very well.Can anyone help, either a list of everything that can be removed safely from a UNR install to leave me with a minimal install, or a way to insert a custom kernel into a lubuntu iso?
View 1 Replies
View Related
Oct 14, 2010
a stock fedora 11 install on my embedded board results in the primary CompactFlash card being driven by the SCSI driver and is called SDA..running my custom kernel which i have slimmed down and yanked out the SCSI stuff because I dont need it, results in my CompactFlash card being called HDA of course driven by the ATA driver.which should I be using? both work just fine.. the CompactFlash card is on board and according to Soekris is actually run from an IDE controller, as there is no SCSI on board..
so im assuming the less amount of system overhead is to run it as IDE?I have no issues running it either way I just want to do whats right.. and what is going to be supported in kernels down the line, as im considering a bump from my current 2.6.30 kernel upwards for my project.
View 8 Replies
View Related
Jan 16, 2010
I am using ubuntu 8.04 and i am trying to make iso image cd with running kernel. i know that there is documentation in ubuntu website in"how to make live cd" but the thing is this is my custom kernel. i have my own configuration. so i want this kernel to be work in live cd.
View 1 Replies
View Related
Dec 18, 2010
I am thinking about compiling a custom kernel with Kernelcheck. I would like to know if I do compile my kernel will future kernel updates from Canonical replace my custom kernel? Please explain this in simple terms. This would be my first time compiling a kernel.
View 1 Replies
View Related
Jul 14, 2011
What are the best ways to make the kernel using git, and localmodinfo. and optimizing the kernel the best way on a laptop I have, which is a desktop laptop, so it is never really unplugged. Has a core 2 duo 2.53Ghz, 4GB DDR3 RAM, and an ATI HD 3870 GPU.so what things other than the obvious core 2 cpu type when making the kernel. It's on Ubuntu 11.04 64 bit. I also want to create it with the local mod info. and Also create this into a .deb package so it may be saved.
View 3 Replies
View Related
Feb 17, 2010
How do I discover which kernel config parameters are important for my laptop hardware and frequently used applications? I'm not looking for something that is 100(...)% optimized for my hardware. I would prefer to have modules for everything that I don't use at all or often. I would prefer to avoid modules (built-in) for things that I use all the time but then any updates might mean a kernel rebuild. I'm currently running the generic PAE edition of the repository kernel. I think that I'm running the 32-bit flavor at that.
Code: user@host:path$ uname -a Linux mumbles 2.6.31-19-generic-pae #56-Ubuntu SMP Thu Jan 28 02:29:51 UTC 2010 i686 GNU/Linux I know the following from sysinfo
[Code]....
View 7 Replies
View Related
Feb 23, 2010
I been trying all day to compile a kernel i downloaded from http://www.kernel.org/ (2.6.32.8 )Following this help thread viewtopic.php?t=4468.When i invoke make xconfig i'm just kinda lost at that point. Not really sure what to do, so i just save it as is and then compile/install.when i try to boot the kernel, a kernel panic happens saying it can't not mount the root partition.So i am sure i am missing a step with the xconfig part but not sure what.
View 5 Replies
View Related
Jun 18, 2011
This is (I'm sure) a silly question, but when reading the guide for custom kernel [url] it mentions I need to use yumdownloader to pull the source as an RPM.
How exactly do I find mirrors etc for this (and where do I configure it)?
I've already got the source locally along with the patches I want to use, and want to try this the 'fedora' way. I'd normally just use make/make modules etc, but I've never tried it via RPM.
View 4 Replies
View Related
Oct 7, 2010
Had a custom kernel (2.6.35.5) running under Slackware 12.1 and also the same kernel on an Ubuntu 10.04 machine just fine, however after a clean install of Slackware 13.1 this kernel no longer works (This kernel was re-compiled with the same .config file under Slack 13.1) as I keep getting the the following: -Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3) The strange thing is it keeps looking for the root file system in hda1, however the stock 13.1 kernel finds it in /dev/sda1 so the root partition is /dev/sda1 in lilo and the harddisk is known as /dev/sda.
View 3 Replies
View Related
Mar 8, 2010
Running Karmic on my laptop, I get very occasional kernel panics (suspect it has something to do with the Broadcom WiFi because it only seems to happen with heavy network traffic or HDD access), but just my lucky, this time it Panic'd on me during my recent update -> linux-kernel 2.6.31-20. My system still 'works', but I get the following when doing any other updates, now:
Code:
sudo dpkg --configure -a
[sudo] password for tango:
Setting up linux-image-2.6.31-20-generic (2.6.31-20.57) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing linux-image-2.6.31-20-generic (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of linux-image-generic:
linux-image-generic depends on linux-image-2.6.31-20-generic; however:
Package linux-image-2.6.31-20-generic is not configured yet.
dpkg: error processing linux-image-generic (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of linux-generic:
linux-generic depends on linux-image-generic (= 2.6.31.20.33); however:
Package linux-image-generic is not configured yet.
dpkg: error processing linux-generic (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-2.6.31-20-generic
linux-image-generic
linux-generic
Now I cannot seem to get rid of that, and of course, I am stuck in the prior version. Granted everything 'works' - but it bothers me. What's the best way to go about tracking down and hashing out a problem like this?
View 4 Replies
View Related
Mar 26, 2010
I need to install Ubuntu on approximately 50-60 netbooks. None of them have CD drives, and I don't want to have to install them individually, walking around with a USB stick. I figured the fastest way to install on so many machines is to use a combination of apt-cacher (http://www.debuntu.org/how-to-set-up...ith-apt-cacher) and netbooting. I have successfully booted one machine to test, but as soon as the kernel comes up, support for the network interface is gone. Specifically, the "atl1c" module is not included on the netboot initrd image. Also, I would like to try to use preseeding, and I need to get that onto the initrd as well.
So, to summarize my question: How can I create a custom install kernel and initrd? I have a feeling it's related to the "debian-installer" category in the package repository, but I have not found any good documentation about doing this.
View 2 Replies
View Related
Nov 28, 2010
It hangs after mounting my root partition, and switching to framebuffer. And ctrl-alt-del causes a normal shutdown - everything gets told to exit.
This where it hangs:
[URL]
This is my config:
[URL]
lspci output:
[URL]
Based on the mainline defaults. I made sure ext4 is compiled in, SCSI, SATA and PATA support... sda1 is my root partition. sdb1 is a data drive. The drives are SATA.I need to rebuild from source to test some stuff for wayland.
View 5 Replies
View Related
Mar 7, 2011
I made a custom kernel for maverick, 2.6.35-27. And I want to get the latest Intel 5300 wireless card drivers working. The wireless works now, but I want to get these installed anyway. I've been on a custom compilation kick for a while, and just been wanting to do everything compiled myself, just to learn a lot. Including putting linux on my WNDR3700 router using DD-WRT. Still doing a lot of customization on that as well.
View 1 Replies
View Related
Nov 8, 2009
I am trying to update my fedora 8 kernel, is there a way to do that? I build the one of kernel.org but when i want to boot it a get a lot of messages like:
mount: cant find /dev/root
I tried to follow the guide at building a custom kernel for fedora, but thats just for the last supported version of the kernel of fedora 8.
View 3 Replies
View Related
May 16, 2010
i just upgraded myself with all available packages from the kde-testing, and fedora-updates-testing repo's. i am dealing with one problem..... i am running kernel:
Code:
@localhost ~]$ uname -r
2.6.32.10-44.fc11.i686.PAE
however,, there are no kmod-wl packages for that kernel, so i have no wireless at the moment. how do i build / obtain kmod-wl package for my kernel? rebuilding the kmow-wl src packages does occure in build for an older kernel:
the command
Code:
rpmbuild -ba --target=`uname -m` wl-kmod.spec
results in:
Code:
Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/-/rpmbuild/BUILDROOT/wl-kmod-5.60.48.36-1.fc11.4.i386
Wrote: /home/-/rpmbuild/SRPMS/wl-kmod-5.60.48.36-1.fc11.4.src.rpm
Wrote: /home/-/rpmbuild/RPMS/i686/kmod-wl-PAE-5.60.48.36-1.fc11.4.i686.rpm
Wrote: /home/-/rpmbuild/RPMS/i686/kmod-wl-2.6.30.10-105.2.23.fc11.i686.PAE-5.60.48.36-1.fc11.4.i686.rpm
Wrote: /home/-/rpmbuild/RPMS/i686/wl-kmod-debuginfo-5.60.48.36-1.fc11.4.i686.rpm
View 6 Replies
View Related
Jul 4, 2009
When I build the kernel 2.6.30 source, the rpm package is very big and needed or root filesystem 800-900 Mb. I use "make rpm" as described in Configure, Build and Install a Custom Linux Kernel - openSUSE.
View 7 Replies
View Related
May 1, 2011
I'd like to create a custom squeeze kernel. Is it a really bad idea to edit to edit the kernel config file directly instead of using "make config", "make menuconfig" or "make gconfig"? My problem is I missing a search function, for example in "make menuconfig" and cannot find some entries.
View 2 Replies
View Related
Apr 6, 2011
I have a strange and inexplicable problem I've never had before - I can play audio as usual from the terminal on Fedora 14 with my custom 2.6.38 kernel. But, when I log into GNOME, any attempt to use an application that uses audio gives me a "permission denied". The "Sound preferences" shows a dummy output device and no entry in the "hardware" section. Using the distro kernel and a 2.6.33.7-rt kernel from planet ccrma works fine.
Is there anything I'm supposed to build into the kernel that Fedora 14 requires that wasn't a requirement for earlier versions?
View 2 Replies
View Related
Jan 16, 2010
I am using uuntu 8.04 and I am trying to make live cd with running kernel. I know that there is documentation in ubuntu website in "how to make live cd" but the thing is this is my custom kernel. I have my own configuration. So I want this kernel to be work in live cd.
View 6 Replies
View Related
Feb 12, 2011
I have a custom built 2.6.37 kernel where I have most of my devices compiled into the kernel. The only modules are related to nouveau (in case I want to go back to proprietary nvidia) and sound drivers. Everything seems to be running fine. However, in /proc/acpi, I'm missing a number of entries, such as thermal_zone/, dsdt, etc. I do have ac_adapter/, battery/, button/, event, processor/ and wakeup. I've gone through what I think is a very detailed review of my kernel config, and I can't find where I've missed something ACPI related. Here is my kernel config with the ACPI section.
Code:
# Power management and ACPI options
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_NVS=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y .....
View 12 Replies
View Related
Jun 26, 2011
I compiled my own custom kernel for the first time. I tinkered with different options, nothing to difficult. I actually didn't expect it to work the first time.
I had kept the original lilo boot config just in case something was to go wrong. Now when I try to boot the system, I always get a "VFS: cannot mount root system on (8,3)". I googled this and found that my kernel did not support my root filesystem (btrfs). So I made an initrd with btrfs kernel module, but it didn't help. I then got a string of errors about how /dev could not be mounted.
My question is two-fold. First, how come when I configure the system back to when it was first installed, it still won't boot? Im using the same kernel (2.6.37.6-smp). Second, how can I get myself out of this rut without reinstalling?
lilo.conf
Code:
lba32
append=" vt.default_utf8=0"
boot=/dev/sda
vga = normal
# Linux - Slackware
image = /boot/vmlinuz-huge-smp-2.6.37.6-smp
root = /dev/sda3
label = Linux
read-only
BTW, I have been maintenancing the system by chrooting into the device off of my slackware boot disk. Im on slack 13.37
View 3 Replies
View Related
May 27, 2009
I have builded my kernel through wiki manual, BUT, the kernel-headers rpm-package has not been builded. Now i have only two packages: kernel and kernel-devel. Is that ok? (i think, that it is not ok, because when i build the same version of kernel on x86_64 platform, after rpmbuild command i have kernel, kernel-devel and kernel-headers packages) My CentOS version is 5.2; platform i686; kernel, kernel-headers, kernel-devel packages 2.6.18-92.el5.
View 6 Replies
View Related
Mar 3, 2010
I have compiled and created a kernel rpm kernel-2.6.18165.11.1.el5-3.i386.rpm
then created initrd image
I have installed the above via kickstart installation
%post
mount xxx.xxx.x.xx:/var/www/html/os/i386 /mnt/tmp
cd /mnt/tmp
rpm -uvh kernel-2.6.18165.11.1.el5-3.i386.rpm
cp initrd-2.6.18-165.11.1.el5.img /boot
[Code]....
View 2 Replies
View Related
Mar 18, 2010
I am trying to build a custom kernel but I couldn't. Here are the steps to reproduce it:
1. Set Up an RPM Build Environment as its is explained in [URL]
2. Then follow the instructions in [URL]
3. When I try to install the kernel source rpm I get the following error:
[matias@Centos ~]$ rpm -i [URL
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root . . .
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
error: unpacking of archive failed on file /home/matias/rpmbuild/SOURCES/linux-2.6.18.tar.bz2;4ba24901: cpio: read
View 8 Replies
View Related
