Ubuntu :: XBMC 9.11 - 2 To 4 Controllers Work From Startup?

Aug 19, 2010

I have downloaded and compiled the xboxdriver from Grumbels git hub. Running 9.10 minimal with xbmc 9.11. I can run the driver manually and actually run multiple instances of the driver for multiple controllers. I cannot however get more than one instance of the driver to start up at boot. I have the freshly compiled driver and daemon that came with source files in /usr/local/bin.

I can run the driver via 'sudo /usr/local/bin/xboxdrv --wid0', I can even get a second wireless controller working with 'sudo /usr/local/bin/xboxdrv --wid1'

When I add the driver to /etc/rc.local it runs fine on startup. The problem is I want more than one instance running. When I add the exact same line right under it except change the wid0 to wid1 it will not automaticly run the second driver. I also can get zero activity from the daemon. I have tried adding it to the rc.local, or /etc/init.d/local (I think someone mentioned it somewhere) with no luck.

I am not quite sure what I am doing wrong. My ultimate goal is to have 2 minimum to 4 maximum controllers work from startup. I want to add emulators to a xbmc htpc and just dont want to have to worry about manually starting drivers. I have forgone using xpad due to its somewhat limited support for wireless xbox360 controllers.

View 5 Replies


ADVERTISEMENT

Ubuntu :: Does SSD Trim Work On Non Intel Controllers?

Mar 5, 2011

In windows the only controllers that really work with TRIM is the onboard Intel ones, Jmicron, Marvell, Nvidia and AMD's don't pass the command to the drives if you use their own drivers. (And from what Ive read, the Micron sata6 controllers don't work with TRIM even using the default Microsoft drivers). In Linux do more then just Intel drives work with TRIM? I have a Nvidia 790i Ultra motherboard, the SATA controller is an Nvidia one which has 2 settings, ATA and Raid (if the drives aren't added to an array it runs them in AHCI) and has an additional Jmicron sata port.

If I enabled TRIM in the OS, would it work on either of those controllers? Also if anyone knows this, in Windows if you set an Intel controller to raid, you wont get TRIM on SSD's that are on the controller (but not in an array) with the default Microsoft driver like you would if it was set to AHCI, you only get it with the Intel RST drivers. Would a SSD on an Intel controller set to raid but not in an array get the TRIM command passed to it in Ubuntu?

View 1 Replies View Related

Debian Hardware :: Which RAID Controllers Work With 5?

Jun 2, 2010

Which RAID controllers work with Debian 5? Is there a list somewhere?

View 2 Replies View Related

Ubuntu Multimedia :: XBMC Crashing On Startup?

May 14, 2010

i'm using lucid and have ATI Radeon HD 4650 1GB graphics card. I installed ATI's drivers and XBMC used to work perfectly, but now after i disabled them and activated them again i have this problem:

Quote:

igor@igor-desktop:~$ xbmc
/usr/share/themes/MurrinaLoveGray/gtk-2.0/gtkrc:50: Murrine configuration option "scrollbar_color" is no longer supported and will be ignored.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server "�."
after 137 requests (136 known processed) with 0 events remaining.

When i start it,i see very strange image,like hundreds of rectangles with parts of images from games,applications,even parts of my Windows desktop (which is on another partition). And after 2-3 seconds,it exits.

View 1 Replies View Related

Ubuntu Multimedia :: MCE Remote To Work With XBMC?

Jun 23, 2010

I am really having a tough time getting my MCE remote to work with XBMC. I have got to the point where sometimes it work but then it gets VERY sluggish and my system crashes.

Code:
#This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.

[Code]...

View 2 Replies View Related

Ubuntu :: Power Button Does Not Work In XBMC?

Sep 1, 2011

The power button does not work when i'm running XBMC.t works when I'm in the XFCE desktop! I push the button and the computer shut's down. What's the problem? Why does it not work in XBMC?

View 4 Replies View Related

Ubuntu :: Video Driver - Accidentally Installed NVidia Hardware Acceleration - XBMC Does Not Work

Nov 14, 2010

While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.

Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?

View 5 Replies View Related

Hardware :: Set Order Of HDD Controllers?

May 5, 2010

How can i set the order of controllers which Debian loads? One of my problems is that it is initializing my PCI-e controllers first and my OS drive is being named /dev/sde. Also is it possible to list which port of which controller a HDD is plugged into?

Code:
:~# lspci
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
00:04.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]

[Code].....

View 1 Replies View Related

Hardware :: Choosing Between Two SATA PCI Controllers?

Jan 10, 2011

I would like to buy PCI to SATA II controller for my machine. I'd like to use them on Debian Lenny stable (2.6.26-2 kernel). So I'm choosing between noname (Logilink ?) card with Sil3124 chip and HighPoint 1720 card. Functionality basically is the same for both cards or at least it is enough for my needs. I will run mdadm anyway. So the question is should I really pay 3 times more for HighPoint ? Is there any reason for that or Sil3124 will do the same ? What about compatibility ? As I know both cards are supported on thet kernel.

View 6 Replies View Related

Server :: Configure Samba For Multiple AD Domain Controllers?

Mar 2, 2011

How do I configure samba such that AD authentication still works when a DC is down? Do I need multiple kdc, admin_server, and kpasswd_server entries in krb5.conf?

View 3 Replies View Related

Software :: Grub With Multiple Hard Drive Controllers?

Jul 3, 2009

I am trying to configure grub to be able to boot from any of the four hard-drives that I have, three of which are plugged into an nVidia RAID controller and the other is plugged into a JMicron controller. Grub seems to only see the loan one and not the other three.Is there a way to get Grub to see the disks attached to another controller?

View 4 Replies View Related

CentOS 5 Server :: Kickstart - Scsi Controllers - Partitioning ?

Feb 27, 2011

I am looking for a way to partition 2 disks automatically with are both connected to 2 different scsi controllers.

I want one disk on one controller to be partitioned with boot and lvm and the other one with a different partition layout.

I there a way in kickstart to do this, like for instance specify the drive module?

View 1 Replies View Related

Ubuntu Multimedia :: Control Parameters In Calf Plugin Synthesizers(Monosynth And Organ) Via MIDI Controllers?

May 7, 2010

Can I control parameters in the Calf Plugin synthesizers(Monosynth and Organ) via MIDI controllers? And if so, how?

Also, if not, please tell me about software synths that i can fully control(i know Zynadd already

I've searched the web and all but nothing turned up.

View 6 Replies View Related

Ubuntu :: Getting Awn To Work On Startup?

Dec 28, 2010

recently upgraded to lucid lynx from karmic in which I used AWN with no problems.However, I now can't get it to work on start up, even though it is listed as one of the startup applications and the box for activate on start up is checked in the AWN manager. I have compiz installed and AWN works fine when I run it once the computer is turned on. It may be because compiz isn't properly listed as a startup application as I don't know the correct command, however other compiz actions work on start up!

Another minor point is that before I had the settings so that the dock was always hidden unless the cursor was over the area. I have played around with the preferences but can't find the right setting to make that happen! I've tried setting the behaviour as Intellihide which seems the most likely to me, but it just acts the same as window dodge... So maybe it's just not working properly?

View 4 Replies View Related

Ubuntu :: Internet Won't Work Without Restarting It After Startup

May 16, 2010

After upgrading to 10.04 I've had to run /etc/init.d networking restart to get my internet connection to work after startup on my desktop computer. Any ideas on how to find out what's wrong and how to fix it? I didn't uprage my laptop yet and it still works just fine so I'm thinking this is related to the upgrade. Softwarewise the only relevant networking related difference between my desktop and laptop is the ubuntu version and that I have openvpn set up on the desktop for work related stuff.

View 2 Replies View Related

Ubuntu :: Mount Hd In The Startup But Id Didn't Work

Jul 20, 2010

i did it to mount my hd in the startup but id didnt work, so i want to undo it, and if somebody can tell how to make my hd to be mounted since the startup

[Code]...

View 5 Replies View Related

Ubuntu :: Startup Script Doesn't Work?

Jul 24, 2010

I try to run a bash script when the machine boots up. I followed the exactly the same procedure as stated in [URL] I tried to use update-rc.d and rc.local. The both ways still dont make the bash script automatically run when it boots up in Ubuntu 9.04. The script can be successfully executed when I log in as root and run it manually.

View 5 Replies View Related

General :: Script Run At Startup Does Not Work Under Ubuntu 10.04 LTS

Apr 29, 2011

I've got a script than ran fine under Ubuntu 7.10 but I'm having a problem with it under Ubuntu 10.04 LTS. The script runs fine when executed via sudo. The script is in /etc/init.d, it's executable, I registered it with update-rc.d, and (according to ps) it's running. It just doesn't work.

Here's the script:
#!/bin/bash
cd /home/xxxx
while [ true ]; do
kermit -q <pc.kcs
sleep 5
done

kermit is installed and runs properly, the directory /home/xxxx exists, the file pc.kcs exists (remember: the script runs when executed via sudo).

View 6 Replies View Related

Ubuntu :: Xmodmap Script Does Not Work As A Startup App / Solution For It?

Aug 19, 2010

In previous versions of ubuntu I used to reshuffle the ALT, SHIFT, and TAB keys using xmodmap.

Specifically, I had a file called ~/.xmodmap-mejia which reshuffled the keyboard, and I called that file from the startup applications (I had added it to system>preferences>Startup Applications).

However, in Ubuntu 10.4 it does not work. If I call the script after the computer has loaded, it works perfectly, but it does not have any effect as a startup application. It is as though changes effected by the script that calls ~/.xmodmap-mejia gets overwritten later on by the default keyboard binding.

As things stand right now, I have to run the script manually every time I turn on my laptop. Which, of course, is very annoying.

Any ideas of how to fix this?

View 5 Replies View Related

Ubuntu :: Autostart - Can't Get Startup Script For My Hlds Server To Work

Jan 3, 2011

I'm usuing clean installation of Ubuntu Server 10.10 with hlds on it. I can't get startup script for my hlds server to work, so i must lauch it always "by hands"...

I have done these steps:

Quote:

with content:

Quote:

Then given permission for it and added for autoload on startup

Quote:

When i lauch it as usual

Quote:

or

Quote:

Server launches and work normally, but it never launches on startup... Just wrotes BEFOREFALL and AFTERFALL55 into /var/log/syslog and that's all... Also tried using rc.local, but it never works too... In what can be the trouble? I think i checked all possible variants already...

View 3 Replies View Related

Red Hat / Fedora :: Ipmitool Doesnt Work During Startup On RHEL 4.5?

Aug 31, 2010

trying to use ipmitool during startup to detect certain hardware and run some configuration. This worked fine for me on RHEL 5.4 but only after smartd had started. For some reason I cant get it to work any time before I get a login prompt on RHEL 4.5

View 2 Replies View Related

General :: Startup Disk Creator Doesn't Work?

Nov 23, 2010

when i click on the "startup disk creator" in control centre it dosen do anything?

View 2 Replies View Related

Ubuntu :: Integrated Card Reader Doesn't Work And Causes Mouse To Hang At Startup

Nov 24, 2010

Everything worked fine in Kubuntu 10.04 (64-bit). On the upgrade to 10.10 (64-bit) it takes about a minute until I can move the mouse after startup and the integrated memory card reader doesn't work (but the green LED which used to only come on when there was a card in there is now always on). This has been discussed twice before: here (closed and solved by unplugging cardreader which I do not want to do) and here (unsolved but closed as maverick no longer in beta) dmesg (note the errer -110) follows. Let me know if I can/should include any other logs/info!

Code:
[ 13.575002] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.790470] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.903728] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.280020] usb 1-5: device descriptor read/64, error -110
[ 17.375755] sky2 0000:02:00.0: eth0: enabling interface
[ 17.376174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.377028] type=1400 audit(1290608578.996:5): apparmor="STATUS" operation="profile_load"
[Code]......

View 2 Replies View Related

OpenSUSE :: Chmsee Fails To Startup And Kchmviewer Doesnt Work Either?

Jul 1, 2011

This is the first time I'm trying out chmsee on 11.4 (I've tried on previous version - never had any issues with it).The problem is chmsee fails to start. It gives error as shown below:


Code:
** (chmsee:11798): WARNING **: GECKO_UTILS >>> Couldn't find a compatible GRE!
** ERROR **: Initialize html render engine failed!

[code]....

View 2 Replies View Related

General :: Enter Some Keyboard Keys At Startup And Assuming That Won't Work?

Apr 19, 2011

this may not be the right place to ask this, but my sister has a macbook and the keyboard does not want to work. i have looked online and i see that the main cause of this problem is in Leopard (correct me if im wrong). So i was wondering if perhaps using linux would solve this problem or if the problem is more hardware related than os related.

Also, how would i go about booting into a linux cd? since u need to enter some keyboard keys at startup and assuming that won't work, is there another way?

View 2 Replies View Related

Ubuntu Installation :: 11.04 With Sony Vaio Fs315m - Sound Card Works Ok But Mic Doesn't Work On Startup

May 2, 2011

I have a sony laptop VGN FS315M, i recently installed Ubuntu 11.04, and i really love the unity interface.

But i have a few issues as well:

1. Vaio FS315M has Nvidia graphics card, ubuntu suggested a video card driver which i installed but didn't work well so i switched to the another one and it worked generally well but that too has problems like if my computer goes to sleep upon closure of lid, it cannot wake up again. it shows only a white screen and only way to get out of it is to restart the computer by manually pressing start button.

2. Sound card works generally ok but mic doesn't work on startup but when i click sound preferences and mic selection from analog microphone to another one and then again to analog microphone, it works but not the first time. Sound output is low compared to windows.

3. Arabic/persian fonts generally are not shown well in firefox?

4. Computer seems to be slow in unity compared to 10.10, may be because of high demand on graphics or the graphics card is not optimized?

5. Skype won't start automatically and there's no option in this skype to do so and also it doesn't save password?

6 . Ubuntu doesn't connect to net connection unless i connect manually, i want it to connect automatically to internet

7. This issue is not related directly to ubuntu. My system is a dual boot system with windows xp as well. Before windows xp, i tried windows 7 beta and then later removed it but it left its bootloader at startup. since my CDROM drive is also out of order so i tweaked BIOS by installing PLOP to install ubuntu. Now i have 3 startup menus if i want to run windows xp, one for ubuntu, then windows 7 with option for earlier version, when i select earlier version then windows xp or PLOP installer. so its a mess. I want PLOP to appear at the beginning (so that i can have boot option from USB available), then ubuntu and if i select windows it should go directly to xp not thru others.

View 1 Replies View Related

Ubuntu :: How To Get Rid Of Xbmc Repository

Jun 3, 2011

When I use the update manager, or use the terminal to search for updates, I get this error message:
W:Failed to fetch [URL] 404 Not Found
, W:Failed to fetch [URL] 404 Not Found
, E:Some index files failed to download. They have been ignored, or old ones used instead.
Now, I know this is a problem with Xbmc (which worked like trash) but I have no clue now to remove it, I've tried to reinstall it, using the purge and auto remove commands, but no such luck.

View 1 Replies View Related

Ubuntu :: Streaming To XBOX 360 With XBMC

Apr 30, 2010

I am running Ubuntu 9.10 with XBMC and am trying to use it to stream media to my XBOX 360. I can connect to it but it shows "No videos found" (same for music and pictures).

I can watch videos/listen to music/view pictures on my desktop so I am fairly sure the library is set up properly. I have samba set up and can view my shared media on my other desktop (running windows XP). I also tried using ushare, which worked but would not play very well.

I have tried all the setting in System-->Network, all to no avail.

View 1 Replies View Related

Ubuntu Multimedia :: 10.04 - Cannot Install XBMC ?

May 2, 2010

I followed the instructions at [url] and added the team-xbmc repository, and updated apt-get

Then I try sudo-apt-get install xbmc xbmc-standalone and see the following:

What can I do to install XBMC on Ubuntu 10.04?

View 9 Replies View Related

Ubuntu :: Can't Get To Desktop After Installing XBMC

Jun 6, 2010

after I boot the system, it would get to XBMC automatically, and when I tried to exit XBMC, it returns to login screen with two choices for Sessions, XBMC and xterm. xterm just gets me a terminal. So I tried to remove xbmc by using command line. Now, whenever I start the system, it takes me to the login screen, and after entering my credentials, the screen will go black for 1 or 2 seconds, then return to the login screen again, in an infinite loops. How do I get my Gnome desktop back? I'm using Ubuntu 10.04 64 bit

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved