Using 10.4, got the webmin installed and squid. Got my access control list setup.Within the acccess control list setup, I can not go to sites likemethodistmd.org or mollimd.org for whatever reason. But I can go to votekirkland as well as google. Why would webmin and/or squid only work with certain sites within the the defined access control list?
View 9 RepliesWebmin running two websites from one server, i've made a second virtual server for my second site including its own document root with it's own index.html file ,but for some odd reason they both run the same site. And i use a Static ip address.
Sites:
[URL]
I have a proxy server (squid-3) that I would like to setup Dansguardian to do additional web filtering.
The system:
Ubuntu 10.10 - all updates as of today
Dansguardian - 2.10.1.1-2ubuntu0.1 (latest update)
Squid3 - latest update (not squid 2.7)
Webmin - 1.530 (all updates)
Webmin dansguardian module - 0.7.1
Ok - I have all of the above installed. When I go to the DG module page in Webmin, I get the following:
Warning - the version of DansGuardian you have is not supported by this Webmin module version
Webmin Module Version 0.7.1 supports DG version 2.10 (& 2.9)
Currently installed DG version
This obviously makes no sense, since I am running DG version 2.10.1...
PS. I have squid installed, but not configured (still tinkering) - could this be the problem? That squid needs to be running for DG to work?
i want to configure my squid sever in ubuntu with webmin.first my machine spec i have xeon with two prosesors 3gb RAM 3 scsi hard drives each 72gb .two ether net card ,one is attached with adsl modem and the second is conected with MY LAN . now what i want is to configure my server to acess only those user whos ip bind with mac. and act transparent proxy sever with user bandwidth control.thats it
View 1 Replies View RelatedI blocked facebook and ..... but if any one change the http with https its open with him how can i mange https like http.
View 9 Replies View RelatedI installed webmin on Debian apt-get install webmin. After installation following message came.
Code:
Setting up webmin (1.510-2) ...
Webmin install complete. You can now login to https://IP:10000/
as root with your root password, or as any user who can use sudo to run commands as root. So I infer that the installation was successful.
But when I do
Code:
http://IP:10000
I get following error
Code:
Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error.
I just installed Webmin on this CentOS 5.5 client and would like to know if it's possible to remotely administer the Squid server. The one I'm using for webmin is different from the one where Squid proxy is running.
How do you set it up and where in Webmin?
I just setup a linux machine that act as a gateway along with squid running in transparent mode. Now I have one asterisk server which is behind that gateway I mean on my local subnet which pass through my linux gateway. Voip server having 4mb up n 4 mb down limit. Clients having 512kbps and upload 2mb.
Linux gateway : controlling band width of each clients
Squid acl forNAT issue with voip sites
Now my question is regarding skype calling. Since skype uses port 80, does it mean that it passes its request via proxy or direct and for safe side I've changed skype incoming port to 443 which squid does not see it. How much and width does skype use for calling in that case. Some one told me that it using squid to pass its request which I don't agree.
I need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?acl blocksites url_regex yahoohttp_access deny blocksitesI have also tried saving some url & filter content in a file and edited configuration as follows,acl blocksites url_regex "/etc/squid/squid-block.acl"http_access deny blocksitesThe squid-block.acl file contents are.cricinfo.commp3
View 2 Replies View Relatedi have been looking up ways to block websites in linux but most all of the free ones only block the sites the software makers want to (or you can't block just the sites you enter without blocking the sites that it wants to)i need to know how to block only websites i enter with squid using webmin
View 3 Replies View RelatedI need to block some of my sites with SQUID Proxy. I added following lines to my SQUID configuration file but still the site remains unblocked.How to block it?
acl blocksites url_regex yahoo http_access deny blocksites
I have also tried saving some url & filter content in a file and edited configuration as follows,
acl blocksites url_regex "/etc/squid/squid-block.acl" http_access deny blocksites
The squid-block.acl file contents are, .cricinfo.com mp3
Example I have 3 user list and 3 file with block site names
acl group1 src 192.168.0.2 192.168.0.3 192.168.0.4/24
acl group2 src 192.168.0.5 192.168.0.6 192.168.0.7/24
acl group3 src 192.168.0.8 192.168.0.9 192.168.0.10/24
[Code]...
I've moved your post here to its own thread. Please don't resurrect dead threads. --win32sux
i just implemented ur instruction n got success but i have one problem that i want to provide only two or three web sites access to groups in squid.
View 1 Replies View RelatedMy Squid is working. But I do not know how to unblock a proxy for two users on my network. My configuration
Code:
acl work src 192.168.16.0/24
acl sites dstdomain "/etc/squid/sites.acl"
acl files urlpath_regex "/etc/squid/files.acl"
acl boss src 192.168.16.12
[Code]....
How to enable blocked sites and files for boss and it_user?
I have a problem with sites or domain blocking by squid proxy server in rehl 5. I have trying lots of time but i'm not succed.pls help me how to block sites or domain in rhel 5.
View 3 Replies View Relatedi have seven department in my office. i want to restricte web sites for all the departments but not same web sites for all the departments i.e. different sites for different departments.i have no idea about this issue.
View 1 Replies View RelatedI'm having some issues settings up a transparent proxy server, which should allow only regular web browsing (port 80), any other port (including HTTPS (443)) has to be blocked, as well as any other port. Right now, I'm using Debian 6 and Squid3. The server only has one NIC. The topology is like this:
Clients <-> Proxy Server + DHCP Server <-> Internet
With this setup, the network does have internet access and the websites I whitelisted are the only ones accesible via browser, however port block is not working, every port is open, hence why trying to access blacklisted websites through HTTPS is possible. Seems to me Squid3 is doing it's job fine, however IPTABLES for some reason seems to be redirecting all the trafic to port 3128 (Squid3 port). I could be wrong, but I've been unable to do anything related to ports with squid3 (either whitelisting or blacklisting).
For Iptables I used:
Code:
iptables -A PREROUTING -t nat -i eth0 -p tcp -j REDIRECT --dport 80 --to-port 3128
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 3128 -j ACCEPT
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 443 -j DROP
Squid3 config:
Code:
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
acl Safe_ports port 80 # http
acl whitelist dstdomain "/etc/squid3/whitelist"
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny !whitelist
http_access allow localhost
http_access allow all
http_port 3128 intercept
hierarchy_stoplist cgi-bin
I have setup a squid server on Rhel5.4. I would like to know how I can configure my squid server to block anon proxy sites.
View 3 Replies View RelatedI encountered a a dependency issue when trying to install Webmin on Ubuntu Server Edition 10.04 Beta1.
When you try to install webmin, libmd5-perl is not available in any of the lucid repositories:
I resolved the dependency prob by adding the following repository to my /etc/apt/sources.list: deb [url]
Then I did a sudo apt-get update then sudo apt-get install and libmd5-perl installed fine along with webadmin. BTW. I got a GPG error when doing a apt=get update because I did not import the public key for the debian repos I used to get libdm5-perl, which doesn't matter to me as I commented out the repos once I got libmd5-perl installed.
I have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.
Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."
The first thing i did after installing webmin was edit the sources.list
Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it
I also uncommented
deb cdrom:
I then typed this sudo wget [url]
After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Then i tryed to install it and got that error.
I also tryed install it using this tutorial [url]
When i got to the part when i need to type
sudo apt-get install update this is what happened
In the past week or so I've noticed some weird network behaviour. I find accessing some sites such as Amazon, Paypal, and Bigstockphoto really slow. Sometimes the page will not load at all. Other sites are fine. The problem sites are not a problem for others on my LAN at home. When I try to open the problem sites, I can see in Firestarter blocked connections coming from 2.1(8/9).xxx.xxx on various ports such as 36007. This only happens for the problem sites. I attached a typical output from firestarter.
This happens with Firfeox or Chrome. Using Ubuntu 10.10
I dual boot XP and FC14 and have 2 routers. I can connect and ping one of these routers when I'm in FC and I have an IP address I just can't load any websites. When I connect to the other router (my main router) it works fine. When I boot into XP and connect to the problem router I can load pages fine. It's only when I'm on FC14 and connect to the problem router that I can't load pages even though I have an IP and can ping around.
View 1 Replies View RelatedI am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedI tend to not use webmin, but there's just some things I dont want to deal with via command line. I know that having Webmin require an SSH tunnel is possible, but i'm not sure how to approach it.
View 1 Replies View RelatedI am current following this how to guide: [URL] I completed it and I am in the testing phases before I make it a public server...I plan to use webmin as my administrative tool on my 2 web servers...Should I install webmin on my load balancers as well? The reason I ask is I want to know if there is any benifit to put it on the load balacers...Would I get any added features?
View 1 Replies View RelatedHow to login into webmin remotely from a different network?
View 1 Replies View RelatedI'm just getting familiar with my new VPS. I have webmin installed. I'd like to host more than 1 website on my server and I just can't figure out how to add a new domain (addon domain) to my server.
View 1 Replies View RelatedTrying to install webmin on Ubuntu 10.04 I get a problem with libmd5-perl.It says that the package is not available.
View 7 Replies View Related