I want to use pump as the dchp client instead of others, how can I do that?I uninstalled connection-manager, and dchp-client3, and installed pump. But on reboot, my network is not up.How can I avoid all this every time I boot the box?
View 1 RepliesGUys im trying to setup a linux router w/in our network here in school, and i was using a fc13 as my linux router, i already setup iptables for linux masquerading.. i have a 20 winxp client connected to the said router with an ip of 192.168.0.1, on each client i manually configured all of the clients ip address.. i was wondering if i could use a dhcp server to ease the manual configuration.., i already installed a dhcp server. Note im a newbie, thus dhcp server will also provide dns resolution to winxp clients??,, on some thread that i read if the client is linux.. you will just need to add nameserver to the /etc/resolv.conf for each linux clients.. the clients that im using here is winxp, i was wondering if i could setup the server to distribute dns & also a dynamic ip to all the clients..w/c 1 is better?? DCHP server or dnsmasq??
View 1 Replies View RelatedI am trying to set up a static IP for the pi.
Code: Select allcat /etc/network/interfaces
this should bring up something like iface eth0 inet dhcp
I know a fair amount about setting up a simple network but I'm curious about setting up a more complex topology...For example...A "box" has two NIC's acting as a bridge, normally this would involve two distinct networks (ie. 192.213... and 192.214...) is it possible that this physical set up can create a single network (192.213... 192.213...) resolving IP's from either a DCHP on the "box" or a DCHP server somewhere else on "one side of the box"likewise with differing physical network types, a "box" with a NIC and a TCP/IP over usb setup connected to another device with TCP/IP over usb (OTG/Gadget) so that all the IP's are on one logical network.
View 1 Replies View RelatedI am new to Opensuse, I am trying to create my Opensuse server to be the DCHP server but as I check there is no dhcp on the Yast>Network services.
View 4 Replies View Relatedim using dhcp server v3.0.6.Configuration file error encountered -- exiting.What i will do this problem, because some are connected to internet but some cannot connect to internet.?
View 2 Replies View RelatedI have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies View Relatedtrying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
I am writing a TCP server in C, and the server listens to incoming client connections and accepts them. It then creates a thread to handle the client. The clients are expected to only receive data from my server and not send any data. So if I use a select() call with a recv(), I believe that the recv() will just block forever since there will not be any data coming from the client. If I use a non-blocking recv(), then this will just return a 0 which tells me nothing because the client is not expected to send any data. I am not sure if I have misunderstood some socket concepts, but I need a solution to detect when the client has disconnected so that I can close the socket and stop sending data to the client. As I understand it, simple ACKs etc are not captured by the recv(), and only data sent by the client will cause recv() to return a non-zero value, so I am not sure how to know when the client has disconnected.
View 7 Replies View RelatedIs there a good terminal services client available I can connect to my Windows boxes from Fedora12? I am willing to pay for a commercial license if there is a good one
View 7 Replies View RelatedI have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies View RelatedI configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies View RelatedI use Ubuntu as my primary OS on my desktop PC, and have another HDD in that PC with Win7 on it for games and such. I recently needed a laptop so I ordered myself a new MBP. Id love to be able to use Ubuntu One on all my systems, is there any chance of a client anytime soon?
View 7 Replies View RelatedI'm currently working for a company that requires me to have an IAX-compatible VoIP client. So far, the only one that works, and the one that was suggested to me, is Zoiper.
[URL]
I can download Zoiper classic (which runs literally as an executable) or Zoiper communicator which has a .deb, but both of them are unreliable for everyday use.
I can run Zoiper in Windows XP no problem, but I'm a programmer and I work much faster with my native workflow in Ubuntu.
I tried installing IAX libraries in Synaptic and tried to see if Empathy, Pidgin or Ekiga would pick it up, but no luck.
I have downloaded the file "icaclient_11.100_i386.patched.deb" from the Citrix website and installed it on my Ubuntu laptop. Everything seems to work fine. I can login to the secured website and even can click on the application.
After a while I get this error message: "You have not chosen to trust Thawte Server CA, the issuer of the server's security certificate (SSL error 61)"
I deinstalled the ICA Client (Citrix Receiver) and re-installed it again, but nothing seems to help. I keep receiving this "Thawte Server CA" error!
I have checked everything in FireFox (Thawte is there) and also tried to load the certificate, but FF tells me the certificate is already known to it.
So, why am I getting the error that I didnt choose to trust Thawte Server CA?
I got a Ubuntu 10.04 system setup with a printer.
A. I can print to this printer. Check.
B. I can print to this printer from a Windows client.
C. I cannot for the life of me figure out how to get a mac OS X 10.6.5 clientto work.
The closest I got was setting up Cups from the apple client, and printing a test page from the CUPS webpage. Nothing else.I have tried just about everything, forwards and backwards.I get almost always the same result.My printer pauses when I try to print to the server -- I hit resume, it pauses. It just doesn't complete a single job.
Is Pidgin the only multi-client IM Client or is it the most popular? Are there any others?
View 5 Replies View RelatedWe have a SAP SERVER running on Windows 2003 64 Bit Server We created a client system on a desktop machine in Ubuntu 10.10. This system has got SAP GUI for Java 7.20 Rev 5 The printer is a network printer Canon IR 3300. I have created an output device using SPAD with the following field values
Output device : CANONIR3300
Short nane : CA33
Device type : POST2
[code]...
Problem is when I print any document from this terminal using this output device, the printer prints a garbage page. scan attached of the print.
PS: Other windows xp terminals are printing perfectly using:
Output device : LP01
Short nane : LP01
Device type : SWIN
[code]....
I am using Ubuntu 10.04 32bit & I like how XChat is so far. I would liek to know if there are more programs like XChat that will work on Ubuntu. When I use Windows OS I find my self using mIRC with a script URL... for my layout. I would not mind seeing somthinglike that for a IRC program.Please point me to some of the programs out there. I have used irssi but I hate how I have to use it in the terminal
View 5 Replies View RelatedI would like to know if there's a way of using FileZilla or another FTP client without having a web page. My intention is to have my files on a server and download them form time to time from different computers using FileZilla's portable version. It would also serve as a Back-up copy of 'em. If there's no way of doing that, I can get a subdomain from, that is free and without a file limit?
View 4 Replies View RelatedOne of the updates (Karmic) this morning listed the following:
Update
transmission-common
lightweight BitTorrent client (common files)
Description
Transmission is a simple BitTorrent client. It features a very simple, intuitive interface (gui and command-line) on top on an efficient, cross-platform back-end. This package contains the common files for the different transmission versions.
Changes
Changes for the versions:
1.75-0ubuntu2
1.75-0ubuntu2.2
Version 1.75-0ubuntu2.2:
* SECURITY UPDATE: fix arbitrary file overwrite via crafted torrent file
- debian/patches/CVE-2010-0012.patch: adjust metainfo.c to check for '../'
- CVE-2010-0012
So, I employed the update. Problem is, I do not see this as an installed application. TRANSMISSION is not listed in any submenu under the Applications menu OR Add/Remove.
I bought a QNAP 219P NAS as it was Linux "Compatible" what it lacks is the instructions on how to install under Linux. I've set up the NAS on the network, have given it a server name, and can connect to it through my web browser, everything appears to be OK with it. What I can't do, as I'm new to Linux, is get the PC to mount the drive. I have installed nfs-common and portmapper through synaptic package manager and I run Ubuntu 9.10 64 bit. What is the setup so the NAS can be used by multiple clients (PCs) and is always there on logon.
View 4 Replies View RelatedI am trying to print from our new Mac laptop to our ubuntu server. The ubuntu server works fine as a print server for our XP, Vista and Ubuntu clients.
I tried this procedure... [URL]
The best I can do is make the Mac print pages squished down to 1/4 size. On my ubuntu client I had to change the print resolution from "auto" to 600x600 to make it work. I don't see the same option on the Mac.
Mac OSX 10.6.2
Ubuntu Server 9.10
Printer: Canon S900
Cups driver: Canon S800 Gutenprint v5.2.3
Cups version 1.4.2 on the mac
Cups version 1.3.9 on Ubuntu Server
How do I print from my mac to the ubuntu server?
I'm looking to setup X11 forwarding on my machine and secure it either with a vpn or ssh. A portable x11 client is need for access on the go. I am not sure if I am over complicating the issue but security is a must and some app I can run in windows on a thumb drive is a must.
View 4 Replies View RelatedWhy is the services tab grayed out in the ubuntu one client? Is this an error? should it be syncing files I have in the ubuntu one folder on my hard drive?
View 2 Replies View RelatedI had ubuntu one working yesterday, by working I mean the client started up from preferences> ubuntu one. Today after doing some updates via update manager it won't start. I would like to purge ubuntu one and start over.
View 9 Replies View Relatedxrdp
gnome
ubuntu 9.10
I have xrdp installed running on the PC. how to allow remote Linux PC to connect Ubuntu 9.10?
Do I need to install;
libcurl4-openssl-dev
libpam0g-dev
vnc4server
I am running Ubuntu Server Lucid 64bit on an AMD-based system and Ubuntu Server Lucid x86 on a dual P4 HP Netserver. I have a Trust PW-4120M UPS plugged into the AMD box via a serial cable.I have installed nut on both systems from the repositories (with "apt-get instal nut") and configured the AMD system as follows:
#ups.conf
[trustups]
driver = megatec
[code]....
I've tried every adjustment to the config files I can think of but without success. I'm guessing this is a permissions issue but I've been unable to find any info on this after extensive searching of Google. As far as I can tell (ie. I've not installed one!) there's no firewall operating on either machine.
Have a laptop with Ubuntu 10.4 and a dual boot desktop with Ubuntu 9.10 and 10.4. Using wifi on laptop. Before upgrading to 10.4 the desktop was the server and the laptop the client. Unfortunately when I setup ssh in 10.4 on the desktop I made it the client instead of the server. Reinstalled 10.4 on the desktop but it still remains the client. Booting the desktop into 9.10 the laptop is the client and the desktop is the server. How can I change Ubuntu 10.4 on the desktop to be a server?
View 3 Replies View Related