I have an odd behavior where the Unity shell looks incorrect when switching windows with 3D cover-flow like behavior. I created a video to demonstrate:
[URL]
When I run unity_support_test, all appears well:
$ /usr/lib/nux/unity_support_test -p
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 3200 Graphics
[code]....
I constantly work on several workspaces, and whenever I open an internet browser or anything, I'd like a new instance of the program to open. The default behavior takes me to the workspace that currently has an open browser, and this page is usually already very crowded. Can I override this default behavior on Unity?
View 3 Replies View RelatedI installed Ubuntu two ways, both by partitioning the hard drive and installing Ubuntu in its own partition, and also where the "run within Windows" option was available. I then upgraded both to Ubuntu 11.04. When I start Ubuntu in the "own partition" installation, Unity runs without complaint. When I start Ubuntu in the "run within Windows" installation, Unity baulks, giving an error message that I don't have some (unspecified) of the hardware it needs to run, and I am kicked back to the classic Ubuntu control screen setup. Obviously the two ways to install Ubuntu don't result in it having the same behavior. Alternately, since the version installed to "run within Windows" seems to do no such thing, and also gobbled up almost all the free space in my Windows-7 partition without prior warning, any clue how to uninstall that version cleanly?
View 1 Replies View RelatedI found a link that shows how to switch 11.04 to Gnome [URL]. However, the same trick is not apparently available for going back to Unity. What would be the step(s) to revert back to Unity?
View 5 Replies View RelatedHow do I switch from Unity to Gnome ? I have downloaded Gnome but cannot figure out how to make the switch. Unity is terrible and if I cannot switch back to Gnome I will have to switch Distros.
View 2 Replies View RelatedI got several WM/DE installed in my Ubuntu 11.04 Trying to switching them in login menu some works and some doesn't. when it doesn't work, it just comes back to login screen with black screen appearing for short time, almost flashing. LXDE did not work before, when I only had default DE comes with ubuntu and LXDE additionally installed. But now it seems it works after installing some other WM. WM doesn't work currently;
IceWM, JWM.
currently i run both KDE and Ubuntu Unity 11.04 on my machine. I have encountered a little problem when switching desktop environments. With KDE, i prefer to use KWin as my windows manager (since i find it highly polished), and with Unity, compiz (not by choice). The problem is that if i don't switch the windows manager to compiz before switching over to unity, all hell breaks loose. Same with switching over from Unity to KDE.
The only solution i have found is to switch to Classic Ubuntu. and use the compiz fusion icon to select the windows manager in order to avoid any problems.
when i log onto the either KDE or Unity, how can i load the correct desktop environment in case it crashes (which it has)?
Note: this has also become a concern to me because of 11.10 removing the classic gnome. If the proper window manger can be loaded before entering the preferred desktop environment KDE, Gnome3 or Unity,
I have been using docky lately (its a great app!) and I am just wondering if there is some way I can make it show all windows in an expose-like format if multiple windows are open, just like the Unity launcher.
Is there any way I can achieve this without switching to Unity?
When switching users or logging out and then back in, the unity desktop will be shifted to the right, so that the clock, power button, etc. is off-screen. This does not happen every time, but seems to be about 50% of the time.It looks to be shifted about the width of the toolbar on the left, so that there is a blank column the width of the toolbar, then the toolbar. So, maybe some screen position data is not being reset at log out
View 1 Replies View RelatedThese are 2 cool shortcuts in Windows 7:
[Windows+Left] - Dock window to the left side
[Windows+Right] - Dock window to the right side
When you press Windows + left arrow the active window occupies 50% of the screen (on the left), and when you press Windows + right arrow the active window occupies 50% of the screen on the right. I have tried to set this up with gnome on Ubuntu but have't managed it so far. I am sure this can be setup in gnome. How can it be done? In summary this splits two windows on the screen so one window occupies 50% of screen on left and the other on the right, how can this be setup and executed pronto on ubuntu?
I predominantly use Ubuntu at home, which means I am used to "highlight 'copies' and center click 'pastes'" (I believe this is true for all X-windows-sever machines, but I don't know). Unfortunately, that is not the behavior on the machines I use at work (I have a Mac and Win 7.). Is there an application which would let me imitate this mouse behavior for either of those OS's?
View 1 Replies View RelatedI am used to using US International as my keyboard layout. However, the implementation appears to differ greatly between Windows and Linux (Gnome, in my case - may well be a GTK issue since GTK behaves the same on Windows).The layout uses dead keys, for example for keys such as ', ", ^, &c. allowing easy entry of characters with diacritics. On Windows pressing a dead key and then a key that has no pair associated results in the dead key's character (when paired with space) and the character from the second key. Example: Pressing ", a yields "ä", however, pressings yields "'s", as there is no pairing for ' and s.
Now, there is a language called English which makes frequent use of exactly those two characters and since it works on Windows to just type them as usual it's muscle memory for me now. Which brings me to my problem:On Linux (and GTK on Windows), there is a pairing for ' and s (among many others), resulting in Å› (which, in turn, leads to me frequently typing "itÅ›"). So typing "it's" requires me to type ', , s at the end.There are a few other combinations I'm used to that don't work. Among those is that for non-existant pairs simply nothing is the result. Typing "I'd" results in "I". Hitting one of those keys twice results in a non-spacing diacritic which breaks my habit of typing strings by first typing both quotation marks (which now result in a non-spacing acute accent or macron).
Long story short: None of the supplied US International layouts appears to function the same as in Windows - are there any that do work identically? Or any chance to configure it that way? While it may be nice to type an s with acute accent or non-spacing diacritics, those aren't exactly common needs for me.
I'm switching over to Ubuntu 10.04.1 from Windows 7. I mostly use my computer for surfing the web and doing school assignments, but I'm sick of getting viruses and such on Windows 7.
View 6 Replies View RelatedI want to switch back to windows vista for a while and how do i do this will a windows vista home premium upgrade disk work?
View 1 Replies View RelatedI'm using 11.04 with Gnome 3 and it seems I can't change windows by using alt+tab. Is this a bug or a feature?
View 4 Replies View RelatedI was running 11.04 as my main OS untill I installed Win Xp Pro. 50 GiB Ubuntu and 100 GiB Win Xp Pro. Now when ever I boot my computer (Acer Extensa 5620) it AUTOMATICALLY goes into the Win Xp Pro OS. So I have no idea how to access all of my Ubuntu files and programs etc. This is a really big problem as I have yet to hook up Win Xp Pro to the internet. It is an older OS and it has made things very difficult. So I really need to be able to switch OS partitions.
View 4 Replies View RelatedI have Googled a bunch for this and have found that it may not be possible, but I would love to find out I am wrong since this is the issue keeping me from switching from Windows full time. My school uses an Exchange server hosted by Microsoft and accessible, from Outlook 2007 through Outlook.com via http proxy. We have laptops with MS office 2007 installed and can use the Outlook connector to connect to this server.Is it possible to use an email client in Linux to connect to this server and retain the use of mail and calendar.
View 9 Replies View RelatedI want to know if I can switching and closing windows from the top panel in Ubuntu Desktop edition ?
View 2 Replies View RelatedI am switching from Windows Server 2003 to Ubuntu 11.04.
These are two different machines, the Windows Server has 2 2TB Hard drives in it, that are setup as a RAID 1. The data on the drives is irreplaceable. I've scoured the internet for about two weeks, trying to find the best solution. It seems like everyone else had a slightly different setup, or the was no solution.
The Ubuntu Server has a 40GB SSD in it. I just installed a 2TB Hard drive (same make and model of the two in the Windows Server) and made the filesystem for it ext3.
First thing I did was just throw the 2 2TB Hard Drives in the new server, and tried to set them up as a software RAID. After it prompt me to erase the drives, I strayed away from that idea.
My end goal is having Ubuntu machine completely replace the Windows machine, so I'll need to setup Samba (which I'm sure I can figure that part out).
How can I get all the data off the 2TB Hard Drives that are using NTFS onto a RAID in the Ubuntu machine with an ext3 filesystem?
I've switched from Ubuntu Hardy to Xubuntu using the terminal. The only problem is I can't find my WinXP partition any more. In Ubuntu I used to mount it by going to 'Places' menu and clicking the folder icon. It's now gone. I can't see the icon in Xubuntu.Been reading other threads trying to find out what to do, but I'm relatively new to Linux. I can't find the folder under /media either. Also, I don't know what types my partitions are. Is this important? I figured I could access my Win folder in Xubuntu the way I would in Ubuntu.
View 4 Replies View RelatedI have a computer with the release candidate of Windows 7 (which is now expired) that I'm intending to switch over to CentOS. Is there anything I should do(besides backing up files) before I try to install CentOS?
View 9 Replies View RelatedI'm using [URL] to help set up my server for windows file sharing. I accedently pressed unix file sharing and now i can switch it to windows file sharing.it would be fine to uninstall the Unix file sharing and replace it with the windows counterpart.I have Ubuntu desktop 10.04 (because i keep getting an error with the kernel with the server editions)
View 1 Replies View RelatedI've been looking for an option to turn off for this, but haven't found any, and Google hasn't been helpful.When I switch windows with alt-tab, or a window requests focus, compiz warps my mouse cursor to that window. How do I make it stop?
View 1 Replies View RelatedIm using xfce desktop environment in debian. I find that I can not see the desktop when using Ctrl+Alt+Tab to switch window focus. I modified /usr/share/xfce-mcs-plugins/shortcuts/defaults.xml and added Ctrl+Alt+Tab shortcut to trigger a terminal command "wmctrl -k on", then i could see the desktop, but failed to switch window focus. Also, I failed to solve this problem by editing /usr/share/themes/Default/xfwm4/keythemerc Could anybody tell me a solution that you should be able to see the desktop when switching window focus, just like in win7?
View 8 Replies View RelatedI'm currently running a Vista machine, but would like to switch over to Linux, Ubuntu in particular. My question is can I switch over to Ubuntu, keep my Windows partition and use VirtualBox to access the pre-existing Windows partition? Or does VirtualBox require me to create a new install for Guest operating systems?
If not, are there any other free alternatives to accomplish this?
In Fedora 11 I cannot switch keyboard layouts between English-Russian-Ukrainian when using window managers other than Gnome/Metacity/Openbox. However, I can see my custom "us,ru,ua" layout in GDM. My "/etc/hal/fdi/policy/10-keymap.fdi" file is as follows:
Code:
<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>
<!-- If we're using Linux, we use evdev by default (falling back to keyboard otherwise). -->
<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name" string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">us,ru,ua</merge>
<!-- <merge key="input.xkb.variant" type="string">,,winkeys</merge> -->
<merge key="input.xkb.options" type="string">grp:ctrl_shift_toggle,grp_led:scroll</merge>
</match>
</device>
</deviceinfo>
The file "/etc/sysconfig/keyboard" is
Code:
KEYBOARDTYPE="pc"
KEYTABLE="ru-cs"
LAYOUT="us,ru,ua"
MODEL="pc105+inet"
OPTIONS="grp:ctrl_shift_toggle,grp_led:scroll"
VARIANT=""
Does this problem persist in Fedora 12?
I am using Linux and Windows 7 on the same machine and my on-board NIC is functional under both. However, the weirdest thing happens when I browse the internet under Linux and then return to Windows; my NIC stops being recognized! This happens under Windows but also in Linux when I return! This problem is then easily fixed by resetting the CMOS, but inevitably occurs again. Why does this happen? Update The CMOS reset works but is not necessary for me. Shutting down and unplugging the power cord works as well.
View 1 Replies View RelatedUsing Windows 7's superbar, I can select/launch the 2nd application group by <Win>+<2>. We have DockbarX in GNOME, which is nice (grouping the windows like Windows 7), but it doesn't enable the <Win>+<2> style keybaord shortcuts.This is not restricted to making Linux like Windows. But I just find the <Win>+<2> style shortcut very useful. Are there similar ways in Linux to quickly switch between specific apps without pressing <Alt>+<Tab> many many times?
View 1 Replies View RelatedI'm a long time user of CentOS 5 w/KDE 3.5. I have always had this problem to various degrees no matter what installation of CentOS 5 I'm currently on. This same hardware does not exhibit the same symptoms with another OS.The problem is I regularly have many konsole instances open. I alt-tab between them frequently. Inevitably a random alt-tab will freeze the keyboard and the mouse won't be able to click anything although I can move the mouse cursor around. I can't type anything. It seems to have some sort of timeout and it always come back to responsiveness.
I alleviated this problem (I think) by switching keyboards, installing the nvidia driver instead of the nv driver, shutting down all non-essential services.I have seen these symptoms on every system I have installed CentOS 5 where KDE 3.5 was also installed. Very different hardware setups each time.Has anyone else run into similar symptoms?I'm surprised that it's just CentOS 5 w/KDE 3.5 that exhibits this behaviour on the same hardware where other operating systems (gentoo, suse, etc.) did not exhibit these symptoms.
I just switched from Windows to Linux. I've been using EditPlus for many years mainly because of it's ability to save locally, and then send the file via FTP, with easy keyboard shortcuts (ctrl-s to save, ctrl-alt-s to ftp).
I also need syntax highlighting and basic code editing features. Is there anything for Linux that can do this? I don't want to run EditPlus via Wine
I need to save locally and remotely simultaneously, or at least with a few keystrokes. I already know of plenty of ways to edit remote files.
