General :: Switching Between Windows Would Cause A Network Adapter To Stop Being Recognized?
Feb 15, 2011
I am using Linux and Windows 7 on the same machine and my on-board NIC is functional under both. However, the weirdest thing happens when I browse the internet under Linux and then return to Windows; my NIC stops being recognized! This happens under Windows but also in Linux when I return! This problem is then easily fixed by resetting the CMOS, but inevitably occurs again. Why does this happen? Update The CMOS reset works but is not necessary for me. Shutting down and unplugging the power cord works as well.
View 1 Replies
ADVERTISEMENT
Jan 17, 2011
I am brand new to Linux and Ubuntu. However it was very easy and smooth to install and get updated using my wired ethernet connection. I am now trying to understand how to have my wireless network adapter recognized or driver installed. I will be searching around the forums but it suggested I make an initial post as a new user. I am using an older Dell Inspiron 2200. I believe the chipset in my wireless adapter is indeed Broadcomm, so hopefully that will help direct any responses.
View 2 Replies
View Related
Aug 11, 2011
I Have an HP Pavilion G6. I recently installed openSUSE after having no luck with another linux distribution. I was told openSUSE is more compatible with laptops, so I figured I'd give it a try. I am now facing the same problem I had been facing w/ the other distribution (Ubuntu). My Network Adapter doesn't seem to be recognized by any linux operating systems. It is a Ralink 802.11b/g/n WiFi adapter. When I open the "network" tab, my home wifi is not listed, nor are any around me. In fact, I can't even open the "wireless" tab.
I've installed any recent drivers for my adapter, and I went to extensive lengths to try to solve the issue on my previous linux distribution. I don't know what output to give you from the terminal, nor do I really know any commands to look for anything. On a side note, I had been messing with my touchpad application, trying to set my preferences. I check the boxes for horiz. and vertic. scrolling with two fingers, and apply. They don't work. I check the boxes for using two finger tap to do something, and three finger tap to do something else.
View 9 Replies
View Related
Feb 17, 2010
I installed a ubuntu server edition on a VMware workstation. The problem is , when I added a network adapter (so, total 2 adapters now), the second one was not being shown in ifconfig. On trying ifconfig eth1, I found that the 2nd adapter didn't have an ip address. So, I installed ubuntu desktop edition on another VM, and this time it showed both the network adapters on doing ifconfig, and both had ip addresses. Why doesn't this work with ubuntu server?
View 1 Replies
View Related
Apr 28, 2011
I have a windows computer that has a virus on it. This computer isn't worth much so I don't want to get a virus program to clear it. I know the virus probably won't be able to crash the linux OS, but will it be able to transfer itself to flash drives if I am running linux?
View 10 Replies
View Related
Jun 15, 2011
I discovered that the wifi usb dongle i used for years went bad so i got an asus dongle that i cant get working.Might it be because my system is looking for my old one and the new one isnt being recognized? (e.g.wlan setting?)
View 4 Replies
View Related
Jul 14, 2011
I have a HP g6t, previously fully running 11.04. I wanted to root my HTC evo 4g so I decided I *needed* to install windows 7. I created a 20GB partition with gParted, then downloaded and burned .iso of windows 7 my laptop came packaged with (windows 7 home premium 64-bit). However, after installing, Windows now refuses to recognize ANY of my network drivers. This means my ethernet connection (was plugged in during set-up) as well as my wireless card.
Stats via lspci:
Network controller: Ralink corp. Device 5390
Ethernet controller: Realtek Semiconductor Co., Ltd. RT8101E/RTL8102E PCI Express Fast Ethernet Controller (rev 05)
View 1 Replies
View Related
Dec 21, 2010
I'm currently running a Vista machine, but would like to switch over to Linux, Ubuntu in particular. My question is can I switch over to Ubuntu, keep my Windows partition and use VirtualBox to access the pre-existing Windows partition? Or does VirtualBox require me to create a new install for Guest operating systems?
If not, are there any other free alternatives to accomplish this?
View 3 Replies
View Related
Mar 19, 2016
I upgraded a wheezy box in qemu to jessie (without systemd!) and now I didn't get an output from the console to a hostterminal using curses.System and grub starts with terminal output, but after around 6 to 8 lines of output the terminal gets black. As far as I found out it seems that the init process switches to graphical output. I tried out all found kernel options from nomodeset up to nofb,Are their other options to stop switching to framebuffer and graphical mode.
View 0 Replies
View Related
Aug 6, 2011
I would like to know how I stop the current window I am on following me when I switch workspace.for example, I have this web browser open whilst I am typing this, I press Ctrl+. (my shortcut to take me to the workspace to the right), and instead of taking me to what was a nice empty workspace on the right, it sweeps this web browser to it as well.I can't find a way to configure this to my liking, can anyone help?
View 4 Replies
View Related
May 25, 2011
I have a bluetooth adapter, but the operating system (CentOS 5.5) doesn't seem to recognize it.
[claudiu@localhost lib]$ /sbin/lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
[claudiu@localhost lib]$ uname -a
Linux localhost.localdomain 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:14 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
View 3 Replies
View Related
Mar 2, 2011
Using Windows 7's superbar, I can select/launch the 2nd application group by <Win>+<2>. We have DockbarX in GNOME, which is nice (grouping the windows like Windows 7), but it doesn't enable the <Win>+<2> style keybaord shortcuts.This is not restricted to making Linux like Windows. But I just find the <Win>+<2> style shortcut very useful. Are there similar ways in Linux to quickly switch between specific apps without pressing <Alt>+<Tab> many many times?
View 1 Replies
View Related
Jan 30, 2010
I am trying to maintain another computer that runs Ubuntu, and everything seems to be running smoothly except for one thing: the wireless. Due to distance issues, I cant use a cord, but the computer is close enough to get a signal. am using a Netgear wnda3100 wireless usb adapter. I installed Ubuntu on the computer because I heard that the device was supported in Ubuntu, and it wast after a while, the adapter is no longer recognized. I have had to reinstall multiple times, and I'm no longer in the mood to reinstall. Does anyone on the UF know hwo to fix this
View 2 Replies
View Related
May 1, 2011
I'm using a "HuiJia USB Gamepad" to connect a standard N64 controller to my computer over USB. I'm doing this so that I can play games using mupen64plus, which uses the SDL to get input. My problem has to do with the way the adapter deals with C button events. Apparently, the u/d and l/r C buttons are treated by the adapter as joystick axes, so joystick events are generated by using them. But, for some reason, these events aren't recognized by SDL.
It gets stranger - if I cat the output of /dev/input/event5, the event gets printed when a C button is pressed. Furthermore, when I configure SDL to use the /dev/input/event* devices rather than /dev/input/js0, the C buttons are recognized! (Though, this leads to a situation where the joystick can't be calibrated... go figure). So, I can either have a correctly calibrated joystick with no C buttons or a miscalibrated joystick with working C buttons. Does anyone have any idea what I can do about this situation? The best outcome would be to force the C button joystick events to appear when using /dev/input/js0. Device as it appears in the output of lsusb:
[Code]...
View 1 Replies
View Related
Jul 17, 2010
i'm running Backtrack3 on VMWare Workstation and its running perfectly without any pb except one and that is my USB wifi device. When i run my Backtrack it shows the device but when i try open Wireless Assistant from backtrack on that time it says No device found. I install the driver from the cd came with my TP-Link TL-WN821N v2.I can use it with my windows7 without any pb but with Backtrack i can't. So if someone can tell me how i can make the device recognize by backtrack. In bellow i attach screen shot. This is when i open backtrack3
Code: [URL] This is after i click Wireless Assitant
Code: [URL]
View 1 Replies
View Related
May 18, 2010
I just switched from Windows to Linux. I've been using EditPlus for many years mainly because of it's ability to save locally, and then send the file via FTP, with easy keyboard shortcuts (ctrl-s to save, ctrl-alt-s to ftp).
I also need syntax highlighting and basic code editing features. Is there anything for Linux that can do this? I don't want to run EditPlus via Wine
I need to save locally and remotely simultaneously, or at least with a few keystrokes. I already know of plenty of ways to edit remote files.
View 3 Replies
View Related
Feb 5, 2011
I am currently dual booting between Linux Mint 10, and Windows Vista SP2. Wireless works fine in both these OSes, but when I quit Mint and load Windows, 70% of the time my wireless stops working.
ie, it does not detect any wireless networks nearby, althought there are tons of them.
Restarting the wireless device doesnt help, I have to restart my computer at least 4 times for wireless to start working again.
And as of now, my wireless in Linux Mint has stopped working.
View 1 Replies
View Related
Jul 16, 2011
I bought myself a Sitecom Wireless Network USB Micro Adapter 300N X3 (Sitecom WL-364) today. When I place the adapter in my PC, it is not recognised as a wireless adapter.
There are similar posts like this one, most of them are about conflicting drivers. According to this post I shouldn't be worried about that (as I'm working in 11.04 32-bit).
The output of lsusb is this:
Code:
Bus 001 Device 003: ID 0df6:0051 Sitecom Europe B.V.
Also, I was having a hard time getting to know the chipset of the adapter. Is RT2870 the right driver for the adapter?
View 1 Replies
View Related
Feb 8, 2009
I just got 5.2 installed on my HP zd7000 laptop. I have a Zonet ZEW2502 USB Adapter but doesnt seem to be recognized. I tried to search in the forums and Google but didnt find any tutorial. point me in the right direction? or do I have to buy a different USB adapter?
View 6 Replies
View Related
Aug 12, 2010
I have spent them with Fedora and liked it a lot. Today I decided to install CentOS as this looks like something I would like to be using in the future. However a problem I could not solve came right at me after the first boot.
I have one eth0 device which is onboard lan and that was correctly recognised and activated. The second device is F5D5055 Belking USB Gigabit ethernet adapter. There was no problem with it whatsoever under Fedora. According to all the info it should be automatically recognised on kernel 2.6.14 and later. However when I plug it into the USB port, I can see its correct name in the device manager but it is not recognised as a network device. I have configured my Fedora as a firewall/router for my lan and definitely want to use that interface.
Hopefully without needing to do anything in the realm of compiling kernel, cause that is where my half a day long attempt to fix the problem left me.
View 17 Replies
View Related
Aug 2, 2010
I have Lenny running on my old Toshiba Qosmio E10 via wired ethernet. what I need to do to get the intergrated wireless adapter recognised, configured etc.
View 4 Replies
View Related
Nov 24, 2010
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
View 2 Replies
View Related
Apr 19, 2011
I have Backtrack4 installed as a dual boot with Vista in my Acer Aspire 5315 laptop. I can connect to my access point with my inbuilt wireless Atheros AR5007EG wireless adapter by starting services/network and WICD. The problem I have is connecting my Alfa network RTL8187 wireless through WICD or wireless assistant. My Alfa network adapter works fine as I have used it with Aircrack-ng in BT4.
View 2 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Dec 23, 2010
I have 3 network adapters on my Linux Machine. All I want is whenever I ping I want to use 1st Adapter card.In the same way, the next time if i want to use the 2nd Adapter for my other application, I should use the 2nd only. How gonna it be possible?
View 1 Replies
View Related
May 29, 2011
I cannot configure my network adapter in backtrack. I just downloaded backtrack 4 and the network adapter a Realtek PCIe FE family controller seem not to be working.
View 1 Replies
View Related
Dec 13, 2010
I have a 320GB external HDD with 2 partitions, both primary:
1. vfat 100GB
2. ext3 remainder
Both were formatted when I created them with qtparted. Windows 7 sees them, and says they are healthy, but does not recognize the vfat partition. Is it too big, perhaps? Short of moving everything off the vfat partition and recreating it with W7, how do I fix it? I think W7 uses some sort of extended fat32 now?
View 7 Replies
View Related
Dec 31, 2010
I set my Network Adapter to the NAT setting, and ran an ifconfig for my machine. All the I got back was eth0 and lo. eth0 has the static IP configured I configured back in the days where I was running my VM Bridged with DHCP. Do I need to reconfigure my eth0 settings now and if so how?
View 1 Replies
View Related
Mar 11, 2010
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper -i rt73.INF
ndiswrapper -l
modprobe ndiswrapper
iwconfig
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
View 3 Replies
View Related
Feb 19, 2010
I am a newbie in linux and I curious to learning all about linux, but I have a little trouble. I've just installed my first linux, its Backtrack 4 and my wirelesss network adapter was not detected..please help what I'm soppost to do..i'm using HP CQ40-416AMD Turion X2Broadcom 802.11 b/g WLAN Adapternote :
View 1 Replies
View Related
