I'm experimenting with Xubuntu on a live CD and would like to access my Ubuntu files located on sda2. I don't see the icons in Thunar to I can mount other file systems. Is there a way?
View 5 RepliesI have Volume Management enabled in Thunar, and I have Removable Storage set to "Mount removable media when inserted". If I insert a DVD I get an icon on my desktop and in the side-pane of Thunar and a folder appears in /media. If I insert a CD I get... nothing. I can play an audio CD in gxine or mplayer or Decibel, but I can't browse the contents with Thunar. The same drive is used for both CDs and DVDs.
View 9 Replies View RelatedI'm unable to mount external drives in thunar. Pcmanfm works fine. Ive tried a 2gb usb stick and a sd card reader. both give the same error. I used to be able to mount drives with thunar. What happened? I'm using ubuntu 9.10, installed lxde on top of server edition. Thunar is 1.0.1 , from the repos. Here is the output from the usb stick:
Failed to mount "2G Removable Volume". mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so .
I am running wheezy + xfce. When I attempt to mount any external volume in Thunar, I get a message saying "Unable to mount-- not authorized." This is problem #1. A bigger problem that I think is related is my wireless. Logged in as a normal user, I cannot connect to any wireless networks using network-manager. My wireless card is functional and I can see all the networks around me, but when I click on one to connect, nothing happens. No password prompt, nothing. Strangely, when I log in as root, wireless works flawlessly. I am a member of the netdev group.
View 4 Replies View RelatedI'm trying to get automounting working with Arch on my laptop, and I've installed thunar-volman. The trouble is, whenever I put in a CD or plug in a USB mass storage device (thumb drive, USB hard drive, etc.), it gives me a dialog like the following: Quote:
Failed to mount [CD/DVD/USB device here]. Rejected send message, 1 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=5706 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2186 comm="/usr/sbin/hald)).
I'm guessing this means there's some config in HAL or DBus that I need to fix, but I can't even begin to figure out what file it could be in.. I've tried searching LQ and Google to no avail. It seems that either the solution is sitting right in front of me, or hardly anyone even has this problem. I can mount the devices manually (as root), but like I said, if I put in a CD/DVD or plug in a USB storage device, or if I double-click the icon on the desktop, I get the above error. I've tried adding myself to the groups optical, disk, storage, and power, but I still get the same thing.
how to get thunar with xfce 4.6 to mount external hard drives. Thunar with xfce 4.8 uses udisk, and all external and internal hard disks show up in the sidebar.With thunar in debian squeeze, though, no internal or external hard drives show up.
I can live without internal hard drives showing up, but I'd like to be able to mount my eSATA drive automatically. So far I've been completely unsuccessful in getting an entry to show up in thunar (like when a usb flash disk or cd is inserted), so I've added an entry to fstab:
LABEL=LIBRARY /home/library ext4 noauto,defaults,users And that doesn't seem to do anything. With and without the fstab line, I get a popup saying something like "Unable to mount volume "LIBRARY". You do not have priviliges to mount LIBRARY."
Everything else seems to mount fine. It's just that thunar/hal/whatever thinks that my eSATA drive is an "internal" hard drive and so doesn't treat it as removable.ALL of my drives, internal and eSATA, show up in the gtk "places" menu that is used in file-roller, iceweasel, etc. If I could find a way to get thunar to do this (like it can wtih xfce 4.8 and udisks) that would be GREAT.
EDIT: I also wanted to add that they show up in pcmanfm, but it also tells me "Not authorized" when I try to mount them.
Since I use openbox with some packages from Xfce4 (mainly for convenience) I get most stuff "for free" as it were when using openbox, but I can't figure out how to mount android devices in a simple way. I can either do it manually, or install some other file manager that has this capability. This leads me to my question, I've noticed that if I install Nautilus, which automatically mounts android devices OotB, I get this functionality in Thunar as well. This leads me to believe that there is clearly a dependency package of some kind installed when running apt-get install nautilus that enables it, It'd be great to get this functionality in Thunar without having all the nautilus packages just littering about for no good reason. the required package is gvfs-backends, which I should have realized when I was unable to browse smb:// addresses. You forget a lot when you only make a fresh install once every 2 years or so.
View 0 Replies View RelatedFirst of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
[Code]....
I am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies View RelatedIs there any way to specify what partitions of my USB Hard drive automount? There's really only one I want mounted automatically, and I've made three partitions. I'd like it so the one mounts, but the other 2 don't. Possible?
View 6 Replies View RelatedI have a shared NTFS partition ("shared") that I use for data for both Windows and Ubuntu.How can I mount the music folder on shared to $Home/Music, and the Videos folder on shared to $Home/Videos? I want to mount the different folders on the partition to different folders in home.
View 1 Replies View RelatedI have ubuntu installed on 2 hdd. one of my hdd is having a lvm. I am unable to acess the home partition created in this lvm from my other hdd. in fact it is not shown at all inside the explorer window, the whole lvm block itself. if u run disk utility that also does not show the lvm partitions as mounted. So what are the steps required to be done to access those LVM partition from the other disk.
View 1 Replies View RelatedI have 4 partitions. One is Ext4 for Karmic, one is NTFS for WinXP, and the other two are Ext4 where I keep all my stuff.When I boot into Karmic and open Nautilus, none of the last three are auto mounted. When I click on one of them, instead of a window popping out asking me for a sudo password, I get a message as shown below.f I try to mount via sudo in terminal it works, but the files for me are then all read-only. Again, if I open Nautilus as root, all works fine.What I want is the following:- for all 3 partitions to automount on startup;- for all 3 partitions to be owned by me and not by root.I tried editing /etc/fstab, but to no avail. Neither did running "chown" help.
/etc/fstab:
# /etc/fstab: static file system information.
#
[code]....
I just installed kubuntu 9.10 and noticed that several partitions (fat32 and ntfs) are mounted automatically after I login. I searched /etc/fstab but found no entries for those partitions. So I guess there may be something like start-up scripts that automatically detect and mount all partitions on the hard disk at boot/login. Does anybody know the location of those scripts (if any)? I want to disable that auto mount.
View 4 Replies View RelatedI have 9.10 and notice that when I look in Places none of my volumes/partitions are mounted - if I click on them I have to enter my user password to authenticate to gain access. My problem is that (with some help) I have set up rsync so it runs when I shut down my PC and backs up my Home folder from a partition on sda to a partition on sdb - this is great but sometimes it works and sometimes it doesn't.
I have done some tests and discovered that if I use my PC and never manually mount my backup sdb partition the rsync does not work (I also have GAdmin-rysnc so I can run manually backup but this also will not run if I do no mount the sdb volume). However, if I do mount the sdb backup partition and close down/restart then the backup works. What I need is my sdb backup partition to be automatically mounted every time I switch on - can this be done? I'm sure I had this working in 9.04 (auto mounting) but 9.10 seems not to like it.
On my laptop I have Windows and Ubuntu, and I use Ubuntu very often. How can I auto-mount the NTFS partitions once I run my Ubuntu without the need to manually ask to mount it and confirm with the root password each time and for each partition?
View 5 Replies View Relatedi want to mount at kubuntu startup some ntfs drives now, i have, on dolphin, to click the ntfs partitions to mount them and after doing that, this lines are included on /etc/mtab
/dev/sda1 /media/WD10EADS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdc3 /media/DATOS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sde1 /media/IPOD_HD-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdb1 /media/SAMSUNG401TB-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdd2 /media/SEAGATE-1 fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
but when i add that lines to /etc/fstab and reboot, i can't access the ntfs drives. dolphin says than only "root" can mount /dev/sda1 on /media/WD10EADS (for example) i tried this too:
[Code]....
I am booting off a persistent pen drive running Ubuntu 10.04. How do I tell the pen drive O/S to NOT mount any windows partitions by default? I want to keep the drive from being able to modify the windows install.
View 8 Replies View RelatedI have U1004 dual boot with MSW7 and sometimes want to mount those NTFS partitions for mostly reading operations. Ubuntu makes it easy by a single click in Nautilus. How to change this behavior and allow mount NTFS partitions with user's password only, like sudo behavior, for example? In addition, how to mount them read-only?
Note: I mount those NTFS partitions occasionally and there is nothing in fstab about it.
my /dev/sdb contains
2 partitions with fat 32
2 partitions with NTFS
1 partition with LINUX ext3
and a swap linux.
I did :
Code:
dd if=/dev/sdb of=image_disk_sdb.img
How can I mount those several partitions?
I figured I could just go in to my Kubuntu desktop and look at the drive. But it has only a lost and found and grub folder with a few files on the root named config-[version]-server (note this is a SCSI). Guessing I'm looking at the boot partition? So how do I mount the other partitions? When I do a fdisk -l I see 3 sdb 1,2,3 (2 and 3 are large, 1 is my boot partition) but when mounting them I get wrong fs type. I was sure its ext3 ( also tried 2 and 4 )? I just left the default 7.04 fs when I installed it. I'm able to put it in my desktop and my server but for the life of me I can figure out how to get at the data.
View 4 Replies View RelatedI initially set up my filesystem on a single disk, normal, plain vanilla, with a partition for /var.Just as an example let's say I have in this file system a path /var/lib/temp.Under /temp I want 4 directories /one, /two, /three, and /four so I get /var/lib/temp/one and /var/lib/temp/two, etc. So I created them.Now I want to separate the directories /one, /two, /three and /four such that each is on its own partition. I create the four partitions and then copy into the appropriate partition /one, /two, /three, and /four. Of course all the stuff inside of those directories are moved over as well.
In fstab I locate a mount point called /var/lib/temp, located just below the /var mount point, and it is on the line with the partition that holds /one.Save fstab, mount -a and it works. Back to fstab, add a second line below the first with same mount point but this time with the partition for /two.Mount -a and /one fails and /two is up. So yes, I can't just put the fstab file together the way I did. I see that clear as day. Last line wins. What I don't see is how to make it right.
I am running Fedora 12 i686. I have three hard drives in my computer with multiple partitions. Three of these partitions are mounted in /mnt by fstab. sdc10, sdb11, sdc1. all are EXT3. About four of every five startups they are mounted. One drive is ATA the other two are SATA and when they are not mounted the drive order is changed the ATA drive which should be sdc is reported by gparted as sda and the SATA drives sda and sdb.
Here is my fstab:
#
# /etc/fstab
# Created by anaconda on Sat Nov 21 10:57:50 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code]....
I want to install Ubuntu 10.10 on the hard disk, but the partition table looks a lot different than in Windows. I have uploaded two screenshots, one of the Disk Management from Windows ( http://oi56.tinypic.com/15y9bgw.jpg ) and another one of GParted ( [URL].... ). Also, I can't mount any of the partitions.
View 2 Replies View RelatedIm new to ubuntu. How to auto mount hard disk partitions.
View 1 Replies View RelatedUbuntu is automatically mounting all windows partitions. I wanted to mount only one common partition i,e NTFS storage partition to mount and used for both OSs i,e windows and Ubuntu. I unticked all partitions in NTFS configuration tools but in vain.
View 14 Replies View Relatedhow to mount windows partitions in Debian just like in Ubuntu. what I want is to mount disk partitions when I click partitions (just like in ubuntu)
View 4 Replies View RelatedIs there a way to auto mount partitions or SATA HDDs on startup, using 10.10?
I have no problems reading the drives.
I have figured out manually setting the swap partition and setting "/" as the mount point for the primary partition during install. If during install, I want to create another partition to keep the OS separate from installed programs and such, to be able to do a clean install every 6 months and not loose everything (or anything) I have done prior.
View 2 Replies View Related