I'm on 10.04 64-bit and can't get tagging to work in Activity Journal (.5) or Tracker (., installed from the ppas. Am I missing something? It'd be really nice to have tag-level access in addition to hierarchal directories! I've spent two hours past my bedtime working on this and am stumped.
View 1 RepliesWhenever I try opening the Gnome Activity Journal from Applications > Accessories > Gnome Activity Journal, it doesn't open, nothing shows up, and not even in the System Monitor. So I took a different route, by opening it from the Terminal, to see if it gave me anything, and when I type in 'gnome-activity-journal' it spits this out at me:
Code:
I want to install the Zeitgeist Activity Journal on Fedora 12, there is a package zeitgeist-0.3.2-1.fc12 (noarch) in the repos and the description says its just the daemon without user interface/gui.
How can I use it on F12, there are many Screenshots on the Internet like this one:
[url]
[url]
I want it as shown in the picture and not in combination with gnome shell. What do I have to install ?
Kindly suggest me any web based daily activity/tracker tool for small organization.
View 2 Replies View RelatedI have a lot of avis with annoying metadata that show in vlc. Since I cannot figure out how to configure vlc in a way that it won't show the tags, ffmpeg should strip the tags. This is supposed to do the trick:
[Code]...
I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View RelatedI'm still quite new on linux .. so please accept my question, even if I'm asking something stupid The fact is that I created some months ago a partition of 50 Gb to store my data and I used an ext3 filesystem with journal .. and the journal was about 1 Gb I thinkNow after a few months of usage I moved all my data to a new device and I noticed thapartition was completly emptied, in fact there was still about 10 Gb occupied.All data was moved away, so I think this might be the journal.
Now a few questions:1) Is it normal for a journal to occupy 1/5 of a device? 2) Is there a command or another way to free up the space occupied by the journal?3) Is there a better option in order of filesystem? Maybe it's better to use another one?I usually use ext3 for the system partition and for data storage partition,then I have a partition into where I store clonezilla images for backup purposesand I decided to use reiserfs for it in order to have more space available,even because it's always unmounted and I access onto it only for backup activities
The upgrade went fairly smooth, with a little effort got everything working except for Compiz. I couldn't enable desktop effects. So I decided to completely remove compiz with Synaptic and re-install. After removing compiz, compiz was no where to be found in Synaptic. Where did it go? How can I get compiz back? I have a NVIDIA GeForce 8600GT video card using the 256.53 driver.
View 3 Replies View RelatedI would like to see the journal of a file-system (ex. ext4) in action. What i mean is that, without knowing what kind of fs is on a partition, i want to test if this fs supports or not journaling.
View 3 Replies View RelatedIm using Ubuntu 10.04 64bits with external journal.
/dev/sda1 is the "/" partition.
/dev/sdb1 is the external journal
Everything is working fine, but if a new HD is added (like dev/sdc), I have a boot error, initramfs error!
Why this is happening? How can I add a new HD without error?
I would like to adjust the journal program called lifeograph. First I would like to build it, clean without any adjustments.
I'm using this version: [URL]
Readme file says:
Requirements
-----------
Lifeograph requires the following modules to be built:
* gtkmm,
* gconfmm,
* gtkspell, and
* gcrypt.
Installation
------------
Type "make" to build and "make install" to install (all without quotes). No configuration atm.
I tried make, but it doenst really work. So i think i dont have good requirements.
-> how do I install the required modules? -> I've found some in packet manager, but some appear to be librarys.
Whilst I've been using Ubuntu for years now, I don't really do much at the command-line, basically because I don't *have* to (which, to me is the beauty of this OS!). However, the last update via update manager has rendered my dual-boot with Vista on an Asus laptop non-functioning (at least Linux). What happens is this: after the BIOS splash screen, it says starting GRUB and then, instead of a menu of current and recent Linux versions and the Vista option at the bottom (white text against colour background) it now just shows one line of the menu in magenta... the rest of the menu is black, but the arrow keys will show the other options. Hitting ENTER does nothing: the text line is replaced with a blinking underline which goes back to the text in magenta again when i hit ESC. I can't seem to ESC or SHIFT to GRUB's command-line prompt at all. I've boot to the LiveCD and ran a boot_info_script in bash: here is what that revealed:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Syslinux is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
[code]....
I made some updates and rebooted (out of necessity due to an old, mysterious glitch that made my keyboard stop working, along with cursors in text and most menus) and my laptop's networking stopped working altogether. Trying to access my home's wireless network only got me a "disconnected - you are now offline" after a long wait, which has happened before, but A) never before right after a reboot, B) the wired connection didn't work either when I tried it, which has never happened to me, and C) this persisted after another reboot.
View 9 Replies View RelatedUpgraded to 10.10 seemingly OK but the latest NetBeans 6.9 (from 6. seems
borked,
On running for the first time it asked if I wanted to import the old settings and then said it couldnt.
Trying to build a new project from existing sources for some reason goes 2 directories up and tries to include everything from there!
I'm running 10.10 and I have an ATI HD5470 and I was trying to add VAAPI support. I was told to compile and install a newer version of ffmpeg from SVN, which I did. I had to uninstall all the current/medibuntu libav* codecs to do so. I want to uninstall it but whenever I try to do anything in Synaptic it tries to reinstall the standard codecs before it can remove ffmpeg so it says
Code:
I can't uninstall this broken version and I can't get all the applications that had to be uninstalled back!
I attempted to install windows 7 to the partition where vista was installed. The install failed, think it's a dodgy burn, and obviosuly took grub with it. However it's also somehow screwed up the partitioning of an extended partition where instead of two ubuntu's, a partition for my media files and test partition for chrome all is left is a big chunk of 'unallocated' and swap. I found a recovery tutorial here but the instructions are little vague.
View 3 Replies View RelatedI'm was running 64bit maverick on an intel i3 clarkdale desktop; pretty much vanilla with the compiz spinning cube desktop displaying on my 720p HDMI telly. On 'upgrading' to natty my pc refused to display anything on the telly but can still be connected to via ssh. Assuming unity was the culprit I installed gnome and deleted unity; after plugging in a VGA monitor I finallly got an output onto a display device, then managed to configure the HDMI telly as a secondary display. Gnome is just a backdrop with no panels at all; I managed to get panels by ctrl-alt-T and typing 'gnome-panel &'; but this was only a temporary fix. If I try to run a terminal now it locks X and I can only restart via the ssh session.
Currently all I have if I boot is the gnome backdrop. The pc auto logs on (as it did under maverick) so alternate logon screens can't be accessed as pretty much all I can do is run stuff via an ssh shell on my other pc.
What I'd like to do is have my desktop how it was before natty trashed it. Preferably without unity or its very irritating scroll bar widgets.
I was reading through the link on journaling-filesystems and i would like to know where exactly is the journal stored in my Harddisk.
View 1 Replies View RelatedI was trying to move my home partition on Ubuntu, and the computer hibernated on me. I restarted it up on the live disk to survey the damage, to find that the home partition, according to fsck, "Superblock has an invalid journal (inode Clear? <y>"
It cannot be mounted, either.
I used sudo mv and Ubuntu tweak to customize my login screen -end result: a white login screen with a flashing rctangle in the middle - where I click my username.I cant login, which sux...Is there a way to use command line (or live CD?) to revert to a regular background jpg file, in home/usr/share/background?I am using Natty, and hope to sign-in without having to reinstall.
View 4 Replies View RelatedI have a 500Gb external disk (esata) used a part of a backup cycle. I tried to mount it for the next backup cycle and an i/o error was detected in the ext3 journal. I fixed the bad block but that lost the data in the block and ran fsck.ext3. This resulted in a damaged file system message and a scan of the disk and fsck finished ok. The disk mounts rw. I am not really sure if I should reformat this disk. I have copied the backups off the disk and in any case there are later backups. Reformatting is not a problem but takes time and I would prefer not to do it if it is not required but I want a clean file system
openSUSE 11.1 X86-64
i seem to have encountered a problem with thunar since upgrading gtk2. about once every fortnight i'll do an apt-get update/upgrade. today a lot of gtk2 libs were upgraded. ever since thunar won't recognise mouse clicks to open any folders in the detailed view, and i'm not entirely sure how or if i can roll back the packages with apt. synaptic won't let me force versions. running squeeze 64 bit btw.
View 14 Replies View RelatedWhen I was using Windows, I would take notes in class on Windows Journal with my tablet. Now that Ubuntu 10.10 supports all my hardware out of the box,I'm planning on using that, but I'm looking for a good replacement for Windows Journal. I don't need compatibility with Windows, but I do need to be able to save and load the notes. Handwriting recognition isn't needed or really wanted, I just use it to draw graphs, formulas, and musical notation for various classes.I love Tomboy, if there's a version that supports touch, I'd love it, but really any app that allows me to draw sometimes and type sometimes and easily switch between the two.
View 3 Replies View RelatedOK, was trying to make a live-usb boot partition on my 1.5TB HD; in doing so clicked a 'wipe disk' button.
A second later I realised what I'd done, clicked cancel (frantically), tried to unmount the drive but was told 'volume busy'. In a panic, unplugged the drive. Unsurprisingly, the drive is now a mess.
I'd had 1 30G FAT32 partition (empty) at sdd1, 1 1.5TB ext4 partition with about 500G of data at sdd2. Now according to gparted I have an unrecognised filesystem type; according to the 'Disk Utility' I have an unmountable 1.5TB FAT32 drive.
I know NOTHING about data recovery. If it's just a case of running a couple of magic 'check & fix' programs then I should be OK, but anything else and I'll have to take it to more skilled friends.
Installed 10.10 Ubuntu and found the Dell D820 did not digest Gnome that easily. I tried adding Lubuntu from repos after adding PPA. Seemed unstable to use, so I followed Psychocat direction for Pure LXDE and removed Ubuntu. Now login is giving error "xsession:unable to launc "openbox-gnome" X Session --- "openbox-gnome" not found; falling back to defaultsession." Where do I correct the xsession login to allow auto login. (I know the chances for autologin, and still choose to use it)
View 7 Replies View RelatedI have a laptop with important data (no backup) that will not boot. It's a vanilla Debian 6 amd64 with dm-crypt LUKs encryption to a internal sata drive partitioned sda1 sda2 sda5 with lvm2 formatted ext3 for sda5. The symptom is that upon powering up, it progresses (albeit slowly now) past grub, to the point where the the "Enter passphrase" prompt occurs. After entering the phrase, it pauses with "Reading all physical volumes. This may take a while". It seems to work, but then gives me errors like:
ata3.00: status: {DRDY ERR }
ata3.00: error: { UNC }
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: failed command READ DMA EXT
...some more stuff...
end_request: I/O error:, dev sda, sector 308725410
JBD: Failed to read block at offset 24711
EXT3-fs: error loading journal
and it drops me to Busybox ash shell. My impression is that the sda1 partition with the kernel is intact, but the sda2 or sda5 is bad.
What else I have done:
1. Removed problem disk and installed it into another known good laptop. Issue occurs with new laptop. So, I would assume hd is bad, laptop is good.
2. Booted from hd using grub rescue mode. Similar errors occurred.
3. Using suspect laptop and hd, booted into a live cd environment, which attempted to mount the encrypted drive. It prompted for the passphrase, but said it could not mount the drive.
since switching from Windows, I have been using Lifeograph, which is a neat little program.
However, my needs are such now, that I am in need of something portable and cross-platform capable, for a whole bunch of reasons.
Basically, I need something that does the job of Lifeograph, or David RM's The Journal, but it needs to be useable from a USB stick in both Windows and Linux.
I know it seems I want the moon on a stick, but i have my reasons. It does not have to be free/open source either. I am happy to pay, so long as it does the job.
Does anyone know if there is an open source equivalent of a Microsoft Office journal that can be used with Fedora (11)?
View 5 Replies View Relatedi've been experimenting with trying to run games via wine (i don't have windows to do a dual boot with), and i just recently tried to open up a dvd in vlc, and... trouble. it works, but now the player "squishes" the widescreen image into a traditional "tv screen" box. even when do it in fullscreen, it just fills the screen with black and plops the "squished" image in the middle of it. i've watched downloaded mp4 images i got off videos like this, and they look fine, but they're not widescreen images. i'm sure there's something really simple somewhere i gotta fix
View 3 Replies View RelatedI just upgraded to Fedora for the first time. I've been using Debian 32-bit forever. I thought I'd try Fedora 11 64-bit. Everything was working fine until yesterday's LAN Party. I could not setup a BZFlag server that others could connect to until I booted up a KNOPPIX 32-bit DVD! Is there something buggy about the 64-bit ethernet drivers or am I missing something here
View 2 Replies View Related