When i log in, i used to be able to be able to start doing things on my desktop straight away. Now when i log in, it takes about 8 seconds for the panel to appear etc. I looked at startup applications and the problem isnt in there i believe, as i have less running than what comes with a fresh install.
View 1 RepliesI've been running 10.04 (lucid, Kernel Linux 2.6.32-25-generic, GNOME 2.30.2) for about 3 or 4 months and everything has been great, until yesterday.
All of the sudden, bootup has started taking longer than usual and the panel at the top of the screen with "applications", "places", etc. doesn't appear until the machine has been running for at least 2 minutes.
Also- the mouse and keyboard (and my external hard drive), all of which are usb, do not respond until about 2 minutes after startup appears to have finished.
So, basically, here's what happens when I power the machine on:
1. Everything functions quickly, and as normal, until my desktop picture shows and the icons on it appear.
2. Whereas before I would have had mouse and keyboard use (and use of the top panel with applications, places, etc.) at this point, I don't have use of any of these.
3. So I just wait, without keyboard or mouse, etc. for about 2-3 min and all of the sudden the top panel emerges, the mouse and keyboards start working, and then the external hard drive appears.
4. As if this weren't annoying enough, after everything above starts to work, opening applications (e.g. firefox) takes a lot longer than it used to. Basically, starting any application after startup takes a long time the first time it's opened.
I don't understand why this is happening. Before this, startup was super fast, and everything was working great. I dont know how to check into recently loaded updates, but perhaps something got changed there that is causing the problem.
I haven't changed anything hardware related at all, so I don't imagine the change in performance is due to anything on that front, but I could be wrong.
I am a long time user of Lineakd.
I just upgraded my F9 to F12 with a new install. I see that Lineakd is no longer in any of the usual repositories. Going back to another F9 system I have, based on the installed rpm, it looks like the last time it included was FC6.
I just wanted to confirm this situation, before I going looking to get Lineakd outside of the standard Fedora repositories.
Before I begin, here are some computer specs:
Toshiba Satellite C655
2 GB Ram
250 GB HDD
Intel Celeron 900 Joules / 2.2 GHz
64 bit
So, a little backstory. For christmas I got a new laptop with Windows 7, and while Win7 is a good operating system, I wanted to try Ubuntu and see which one I liked better. I installed the 32 bit version, because I understand people run 32 bit Ubuntu on 64 bit machines with out problems. For the first few days, everything was going amazing and I was pretty much using only Ubuntu (I had a dual boot with WIn7). One day, I opened my lid to find that the log in screen wouldn't appear, so I restarted.
I wish I could remember what error I got, but everytime grub tried to load Ubuntu, it wouldn't load, it just gave me some error (it may have been a kernel panic, not sure). So I went into windows, burned a windows repair disc, and fixed the MBR to be the windows boot loader instead of grub, then deleted the Ubuntu partition. Shortly after, I tried the 64 bit Ubuntu installation, and it wouldn't even boot up after the first boot (unfortunately, can't remember the error I got then either). So I repeated the MBR fix for Windows, and just stuck with Windows for a while. However, a new problem arose. Every now and then (and in time, more frequently) everything would freeze, for 1 to 2 seconds.
It couldn't have been my RAM or anything, the computer was blazing fast when I got it. The windows boot also took much much longer than usual, until it just wouldn't boot at all. I had my father (who's much more knowledgeable at computers) to do something, and he loaded into an earlier recovery partition ran a program called CCleaner, which supposedly fixed it. However, the problem was still there, and it got worse. I tried CHKDSK, it didn't do anything. The random freeze ups kept happing more frequently and became more and more bothersome. Eventually my computer just wouldn't boot up, it would just be a blank screen after the 'Toshiba' logo.
I eventually called Toshiba and they said that I apparently deleted the original recovery partition, and needed a Windows install disc, which I don't have so I have to buy one. Until then, I decided to just do a complete install of Ubuntu (64 bit), since I figured if I just did a complete fresh install removing everything, it would fix it. Well, turns out it had the same freeze up problem. I then tried a clean install of 32 bit Ubuntu. No luck, still periodical freeze ups, sometimes if the freeze ups are longer the screen will go grey. Before all this mess Ubuntu ran perfectly. I'm fearing that it may be my hard drive that's the problem, but I'm not entirely sure. So, is there anything I can do to restore my laptop to full health with out buying a new hard drive? Unless the hard drive isn't the problem, but I don't see what else is. EDIT: I tried memtest. Here are the results: It says 'Pass complete, no errors'. What do you guys think?
I've recently installed Ubuntu 10.10 on my laptop -- clean HD, no other partitions.
(It's odd, though; when I go to System -> About Ubuntu, it tells me I have version 11.04 Natty Narwhal.)
Anyhow, when switching on my laptop, a short drumming sound effect can be heard when the login prompt appears on the GUI.
There are numerous threads on the Internet explaining various methods to disable this. I have done everything as instructed in these threads to no avail, including:
1) System -> Administration -> Login Screen -> Unlock -> [enter password] -> make sure "Play login sound" is unchecked (it was already) -> Close
2) System -> Preferences -> Startup Applications -> uncheck "Gnome Login Sound" -> Close
3) System -> Preferences -> Sound -> Sound Effects -> Alert volume -> check "Mute" -> Sound theme -> No sounds -> Close
It's foolproof, really. Nevertheless, when restarting the computer, the drum sound is heard again at the login prompt.
I realize I can simply find and delete the sound files, but isn't that a bit harsh? Surely there must be a more elegant way to silence the login.
My ubuntu(10.10) installation takes a relatively longer time (90 seconds) to boot. I think part of the problem might be related to an error message during boot related to usb drivers.
Code:
[2.717076] usb 4-1: new low speed USB device using ohci_hcd and address 2
[3.244051] usb 4-2: new full speed USB device using ohci_hcd and address 3
[12.029046] /build/buildd/linux-2.6.35/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
I have attached the relevant part of dmesg output also.
we bought a dual 12-core Opteron machine (Supermicro H8DGi board). Installed Slackware 13.37 and performed some few tests. We observed that performance quickly degraded as the box became loaded. For instance, a lonely task may took "t", but when running 24 of them at the same time (fully loaded box), it may took 2 to 3 times longer. From some test we did (tinkering with BIOS, moving memory modules, etc) we came to the conclusion the problem was due to a terrible memory managment. Finally we solved the problem by recompiling the kernel and taking the .config file from OpenSuse. Thus, there must be something to be tweaked in the standard Slackware .config file
View 8 Replies View RelatedI have ubuntu 10.10 installedWhen it was new It was too speedy in starting upbut, Now It is taking about two to three minutes to getting started.I tried to remove some applications from System/Preferences/Startup Applications,But no differenceI want to speed my systemIt has no problem in speed after starting up
View 14 Replies View RelatedI have been dual booting Windows 7 and Ubuntu for a few years now, and yesterday I successfully updated my Ubuntu partition to release 10.10.
Today my daughter visited and used my computer. She always boots into Ubuntu rather than Windows, and today I suspect that she may have turned off my computer before Ubuntu had completed shutting down.
After my daughter left for the day, I started up my computer, selected Ubuntu from my Grub2 menu, and got dumped to a command-line interface with the following lines at the end:
mount: mounting /dev on root/dev failed: No such file or directory
mount: mounting /sys on root/sys failed: No such file or directory
mount: mounting /proc on root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init
No init found. Try passing init= bootarg
I'm thinking that my Ubuntu partition has probably been corrupted and that I will need need to reinstall Ubuntu. If anyone has any ideas as to how I might be able to repair or revive the partition without having to re-install the operating system,
this computer (Yakumo model 331, 386 MB RAM) began running really slowly, crashing when multitasking, etc., but only in Ubuntu Karmic Koala. Kubuntu Karmic has no problem, nor does OpenSUSE. I finally figured out the problem when looking at system monitor: 0 bytes of swap! I have a 640 MB swap partition, which the other OS's are able to access, but Ubuntu no longer does unless I open a terminal and type in
Code:
sudo swapon /dev/sda6
If I do this, everything works fine until next time I boot up. Is there any way to fix this?
I've used the startup-manager on my old laptop, also running ubuntu, to control the number of kernel options shown in the grub menu, as per this how-to:-[URL]see the last screenshot on the page. I've got a new laptop and am trying to do the same, but on the advanced tab I no longer have this "Limit the number of kernels in the boot menu" option, all I have is "Bootloader menu resolution" and [Create rescue floppy]. Is this because I am now running 64 bit or has this changed in 10.10 (I probably haven't looked at that on my old laptop since before 10.04)?
View 4 Replies View RelatedI've tried to install kile on my new Ubuntu 10.10 using the usual command: apt-get install kile But got and error while installing texlive-base. So, i remove the previous instalation and tryed to install textlive-base. Now, i'm receving this error message:
Code:
Setting up tex-common (2.08ubuntu0.1) ...
Running mktexlsr. This may take some time... done.
texlive-base is not ready, delaying updmap-sys call
texlive-base is not ready, skipping fmtutil-sys --all call
Setting up texlive-base (2009-10)
[Code]...
When I restarted one of my servers today and actually worked directly on the system (not through SSH as usual), some weird error messages kept appearing in the console. So I checked the syslog and found several instances of the following lines:
[Code]...
I would like to start some of my services (VNC Server, FTP Server, HTTP server) in the background AFTER I've booted into the GUI. How can I achieve this?
View 2 Replies View RelatedI have an Alienware M11x r2 laptop running Windows 7-63 and Ubuntu 10.10 Unity installed.It was all fine and dandy until I changed my grub timeout to 1 sec (or perhaps 0, its been so long i can't remember!) to reduce the waiting time until an OS boots.My grub was set to boot to Windows 7 as default.Now when I boot up I cannot halt the boot process not matter what key I press (e.g SHIFT).I am doomed to forever boot into Windows. Its been months and I had written off my Ubuntu OS but I am tempted to try and fix this one more time.Since I cannot access the Ubuntu installation AT ALL I cant use the usual ways to increase the timeout on the grub menu (yes I have searched the forums far and wide).
Is there ANY way of changing the grub menu parameters without actually booting into Ubuntu Unity? Can I modify the timeout settings using a live cd or usb boot?
What is the usual download speed for updates to the Debian system using the update option under the Administration tab? I am just getting 4700 B/s, but have 5 Mb/s DSL. Is this due to overload of Debian website?
View 5 Replies View RelatedI've recently noted that the boot process in my Jessie installation is occasionally taking longer than usual, not dramatically as in "really hanging", but still noticeably slower, during which some messages are printed along the lines of
Code: Select alla starting job is running (2 of 5) and also after that, once lightdm (I'm using the MATE desktop) comes up the screen gets painted slower as well.
Unfortunately, once the system is up and running there's no longer trace in the logs (either traditional syslogs or journalctl) of such messages, however what comes to mind is that I've just recently enabled persistent logging in systemd: could this be the reason of such (occasional) slower boot process?
Other than that, what else could cause such behaviour? What should I eventually check to ensure things are OK?
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
Since doing the update which included kernel "2.6.32.16-141 fc12-i686 PAE" I can no longer boot into my usual 1280x960 desktop. I can set it using NVidia settings but even though this offers to modify xorg.conf it fails to do so. I have tried running as root and it doesn't then give an error message but when I look at xorg. conf there is no section.showing any specific screen size. It worked ok before the update. In case it is relevant the video card is a Quadro FX1400 with KDE. Also the whole program seems rather unstable since the update.
View 10 Replies View Relatedccess to an iso file in chroot environment from my usual root (/) env..
Within the chroot environment I have an iso file placed... In my program I need to access this iso file and perform mount and other operations.. But I cant do this in the chroot environment as I have only basic commands here (ls,cp etc.. and no mount)
So how can I access this iso file from my program ? Is there something like a file-descriptor which I can associate with the file exit from the chroot env and access the file via this fd ?
Something has gone awry with my login. After the usual username/password prompt my laptop comes up with smart card authentication & I can't login. How do I get away from the graphical login so I can login & correct the problem?
View 3 Replies View RelatedI experience this since kde 4, but it never really was that bad because once in a while on updating kde I also deleted the .kde folder in my home-folder and everything was fast again.
But I haven't done this for a while now and kde take really long to load. Is there any folder to clean up there without deleting the whole .kde-folder and loosing all my settings again?
1. Is it possible to instead of using the Desktop Folder plasmoid, have a usual Desktop act as a file manager?
2. What is Akondi? There are tons of processes which have Akonadi in their name, and it seems to be using up lots of memory.Can I disable these somehow, or is it safe to do so?
3. Any general tips on how to reduce the amount ram that is used on startup? I am using somewhere around 750MB on startup, which is about double the amount Gnome uses. After a few hours of use, Xorg uses close to 1GB of memory.
4. Whenever I get a notification, they don't delete themselves, so when I click on the (i), I see tons of notifications. Is there a way to get them to delete themselves after they have been shown?
I am trying to become su in the terminal window. It asks for my password, I give my usual password and I get "authentication failure". I thought that my log in password works for the su as well?
View 3 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedIs anyone else seeing the default icon in GNOME Shell instead of the usual Firefox icon? I am talking about the default icon that looks like a purple diamond.
View 2 Replies View RelatedI've just installed the new Fedora 11 (just released) through a Live CD having 3 partitions created:
"/boot" - ext3,
"/" - lvm (part 1)
swap - lvm (part 2)
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
I know other threads have raised similar issues to mine but I haven't been able to find in them a solution to my problem...
My laptop cannot complete its Ubuntu One sync - the syncdaemon never stops running at 100%. After a few hours, I give up and kill it off.
It writes large amounts to .cache/ubuntuone/log/syncdaemon.log for a while but then stops writing anything, even though it continues running at 100%.
Whilst it is working so hard (doing nothing?), the file manager is virtually unusable.
The problem started when I (a) installed Magicicada and (b) added another 700Mb folder to my synced folders.
My desktop PC doesn't have this problem. They are both very similar Ubuntu installations except it has a conventional hard disk whereas the problem laptop has SSD.
The previous writer gave instructions for editing fstab. He said to enter something like the following line in fstab:
/dev/hdb1 /media/harddrive ext3 defaults,errors=remount-ro,users,user_xattr,user 0 0
My partition is: /dev/sda7.
I created a folder in media: /media/8g
The file system is: ext2 (Do I need the "defults" instruction? What does this do?)
errors=remount-ro (I think I understand this)
[Code]....
He also said, after this was all done, to enter the command: sudo mount /media/[my new partition]
Since it's already mounted? What does this command accomplish?
I've recently installed Ubuntu 9.10 (dual boot with Windows 7) and whilst the Live CD was a breeze, after installation, Ubuntu is taking close to 20 minutes sometimes to load.
I've dual booted before with 9.04 on other machines and haven't had a single problem