OI hooked my sony vaio laptop (running ubuntu 9.10) up to my vizio tv using vga cable, my tv also has a port for rca cable next to vga port. I plugged both cables into my tv and the picture worked right away, but no sound.
View 2 Replies
I just bought a 32" Panasonic LCD (1080p) and have decided to use that as my main monitor. Unfortunately, when I hooked it up to my computer, I had under-scan with both Windows 7 x64 and Ubuntu Karmic x64 (using a Radeon HD 4870 1GB). In Windows, there was a simple slider in the Catalyst Control Center to fix the under-scan issue. Unfortunately, the same option wasn't available with the Linux counterpart. I searched online for some answers, but all the ones I found seemed outdated, or gave me errors.Using the Aticonfig help command, I figured out how to fix the under-scan in Linux.
View 9 Replies View RelatedLong time Ubuntu user, but it's been a couple years.
My friend had an old Dell Dimension E251 lying around and I said I'd help him turn it into a media center of sorts. The old 52" HDTV he wants to plug it into has a broken vga input and no HDMI, so our only real option is component or (heaven forbid) S-video. He can afford to get a new video card if it's relatively cheap, and I'm not really sure what would be our best option. Does anyone have a card in mind that would be relatively hassle free? I considered getting a card with HDMI output and using one of those HDMI to component converters, but my research suggests that that won't work. Are there old cards with component out, or is there a card that makes this relatively easy to achieve?
I'm helping a friend set up his new pc and we're having a lot of trouble getting his second monitor to work.He has a GeForce GTS250 video card which has a HDMI output port as well as VGA. His main monitor is connected via the VGA and works fine. The second monitor is a Soniq QV320H TV which he wants to connect via HDMI. The nvidia settings configuration shows both monitors (set up as separate x-screens) but the only output on the Soniq is a black screen which flashes "unsupported" about every 2 seconds. Currently the resolution is set to auto (1280x1024) but we've also tried lower resolutions (down to 800x600) with no success.
View 3 Replies View RelatedDoes anybody use USB HDTV (digital or hybrid) tuner ?
1) does teletext work in digital TV ?
- Do teletext pages appear immediately after page numbers entering or
- must you wait every time because of counter rewinding ?
2) Does analog FM radio (88 - 108 MHz) work in that kind tuners ?
I want to hook up my LCD HDTV to my PC as a 2nd screen. I temporarily hooked it up to the VGA port of my MoBo with my primary panel on the DVI port. The system auto-detected the tv once I launched the GUI gnome-display-properties creating a virtual display of my desktop. Unfortunately both the top and bottom panels moved to the TV with the background, the desktop icons stayed on display 0. My intention is to use the TV for playing videos on my system.
View 6 Replies View RelatedI cannot get video, let alone audio, from my opensuse 11.3 box to my HDTV via the AV receiver.I have a computer and a DVR as HDMI input to a Yamaha 765 receiver. The receiver than uses hdmi to output to my samsung hdtv. I am using a ZOTAC GeForce GT 220 with an HDMI port as a video card. As an aside, I could probably upgrade my video card. Suggestions are welcome though I am concerned about heat as it needs to share space with a 4 port hardware RAID controller.
View 6 Replies View RelatedI have a Philips 19' HDTV I use as my monitor, I have tried every guide out there, including the wiki one with xandr. Nothing works for me. This seems like it should be way easier, set custom resolution go.. but this isn't the case.
Using Ubuntu 10.04 -
I've tried editing the xorg.conf and adding the modelines and changing the modes , I've tried the xandr commands. I've tried guides from years ago to current ones. I'm desperate, Everything is cut off like maybe an inch not even. Can just barely see the edges of the top and bottom bars.
I've been working on this for many many hours coming up with nothing every time. I wish there was a way to just resize the desktop.
Here is my most recent attempt at the conf file.
Quote:
I'm having a really odd problem with my workspace switcher. First off, I keep 5 workspaces all in one row.
My problems: When I use the keyboard shortcuts Ctrl + Alt + Left or Ctrl + Alt + Right I can switch workspaces just fine, however I have a xbindkeys install set up to detect specific keypresses from my Logitech MX Revolution and spit out those very shortcuts, and they aren't working. When using the keyboard shortcuts to switch workspaces there's a new look to the visual aid that pops up in the middle of the screen. It's much boxier and ugly looking, and I'd like to get it back to the way it was before, with the larger boxes with rounded edges and no text. This started last night when I plugged my laptop into my Panasonic HDTV via S-Video. Can anyone tell me how to uninstall the workspace switcher component and reinstall it? I'm fairly new to Ubuntu and just want the default settings back. I'm running 10.04 btw.
I have an HTPC with an onboard ATI video chipset but for hardware acceleration's sake, I installed a GeForce 9500GT video card. Everything works quite well, except for the overscan issue. I've installed the latest nvidia binary drivers (manually) but I don't see any options in nvidia-settings to solve this overscan issue.
Here is my xorg.conf file:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.21 (buildmeister@builder103.nvidia.com) Thu Nov 4 20:57:26 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
[Code]...
I tried adding that ModeLine line myself (using xrandr and gtf) but that fails too. I've scoured the web and these forums, and I've seen some overscan issues reported but with no solution in sight.
i have for pc connect to my hdtv and sometimes it blinks alot.it like someone is changing the channel. it does it the most when i'm watch a video in movie player. i thought it was just movie player but it does it when vlc player too. oh and it does it too with the nvidia drive on way more.
View 4 Replies View RelatedI want to attach an RCA R52WM24 hdtv to nVidia QuadroFX 1400 128MB PCIe 16x Dual Monitor video card via DVI cable, under Slackware 13.1.I have the stock driver installed by Slackware, I believe it is vesa as I have xorg.conf-vesa, not xorg.conf.Merely plugging the tv's dvi cable into the card (the tv is off) drives linux berserk, particularly the X server.
After the initial "Bios data check successful" message linux puts up another message that includes "Undefined video mode number 305".Ignore this message and when the X system starts the screen contains vertical bands each containing pastel colored rectangles that vary their shape and color to some complex pattern.Acting on the message, there is one available setting (640x400x32) that produces sensible X output, but so oversized as to be virtually unusable (the monitor is 1366x768).Remove the plug from the card's 2nd dvi socket and all is well again.
I've recently got a HDTV LCD display (BenQ SD3742), and a nettop (Acer revo 3610) to go with it. I connected them using an HDMI cable, and I installed the latest Ubuntu 10.04 64 bits edition.I then installed the latest nvidia drivers (nvidia-current package, which is nvidia-glx-195) to support nVidia ION platform using this ppa: https://launchpad.net/~nvidia-vdpau/+archive/ppaAccording to various websites, my LCD is FullHD, so I should be able to select 1920x1080 resolution. But the automatically selected resolution is 1280x768, and in nVidia configuration panel, this resolution is stated as being "native resolution" for my screen (its name is correctly detected by Ubuntu, by the way!).If I select 1920x1080 and "Apply", the resolution is changed but the borders of my desktop are not available... and the image looks deformed anyway.Is there any way to make Ubuntu to detect properly this LCD display in its real native resolution (FullHD, 1920x1080)?
View 2 Replies View RelatedI am trying to build a media pc, and successfully so till this one little/big problem. I want to be able to turn on my tv, and pc, and have the pc display onto the TV. Ports used are HDMI(pc)->HDMI(HDTV)
But for some reason Ubuntu will not fully load with just the TV plugged in (all i get is a black screen, not even a "no signal" message).Once a LCD monitor is plugged into the VGA port. Then I see a glossy white Ubuntu symbol on the LCD monitor. Then the Ubuntu loading screen appears on both the LCD monitor AND the TV. in mirror mode. And I can see the desktop on both monitor AND TV.
I am using an ATI RAEDON HD 4200 chipset that is on the mobo. I have downloaded the proprietary drivers and installed them. A few things I have tried are the instructions on this page, finding my modeline using a modeline calculator and also going off of a suggestion from a thread on this website, stripping down my xorg file so that the Xserver would autodetect it. Which i think I did wrong because after that, it wouldn't display on TV at all.
So I think it's a problem with the resolution not changing back. But I don't see any menu, like the HP Logo, on my monitor at all. Thought It might be the blue cable, changed it, nothing. Plugged it back into TV and it works fine.
View 2 Replies View RelatedOkay, so here is the deal I have been using Ubuntu for awhile as a network monitoring system and have now changed it to being my main system and was wondering why when my machine is hooked up to my HDTV via a VGA port on the back of VIZIO television, I am only getting a max resolution of 800x600? If anyone can help me with this problem it would be awesome.Any additional information needed please include you terminal commands because I am still just so terrible with those.
View 5 Replies View RelatedI've had a look and can't find this particular problem on the boards (feel free to correct me if there is something useful already though). I've recently got a Sony HDTV, and have hooked it up via HDMI to an Nvidia GeForce graphics card. Surprisingly enough, I'd like to watch movies/TV this way. However I'm experiencing flickery horizontal white lines on the desktop, and horizontal lines through video. I generally use VLC to play stuff, and have the 805 Nvidia proprietary driver installed.
So far I've tried:
Changing the resolution and refresh rate (Including the native TV ones)
Using Twinview, Separate X Screen and unplugging my monitor altogether.
Uninstalling the Nvidia Drivers and using the standard ones
Re-Installing the Nvidia Drivers
Xine Player
Changing video output of VLC to X11
Using Force scaling (I think, it's a tv-specific setting to compensate for differences in native resolution)
Switching desktop effects on and off
In short, it doesn't seem to be an issue with drivers, resolution, refresh rate, video files, codecs or players. How to stop these flickery lines as I wouldn't like to have to give up on the OS over one problem.
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
View 4 Replies View RelatedI have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedStrange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
