Ubuntu :: Simulating A Mouse Click To Raise Skype From Gnome-panel Tray
Nov 4, 2010
Here's a summary of my problem: When using Skype, it's possible to close the gui of the application only. When doing this, the Skype process itself doesn't close; it hides in gnome-panel's notification-area.
Now, when opening the Skype application again (e.g. by clicking on a Skype launcher), Skype starts a whole new process. This is shown to the user as a new Skype tray icon being generated, as well as a new gui window being created.
What I'd like to do is as follows:
I'd like to replace the Skype launcher with a script that would * recognize if there is a Skype process running if yes, bring up that * instance of Skype if not, start Skype normally
Now, I've read some of the source code of gnome-panel to try and see how it's done. From what I've gathered, a button_press_event is bound to some function that probably (am unsure of this) sends a signal of some kind to Skype.
Very similar to this thread, except for Skype and without wmctrl (does not work with Skype): HOWTO: Make a launcher restore an open window (dock-like) [URL]
View 5 Replies
ADVERTISEMENT
May 27, 2011
I was trying to make my surround sound work and screwed things up. Anyways, one of them is the one with the vertical slider and the other one is the one with the horizontal slider. I want to get rid of the one with the vertical slider. How do I do this? (The one with the vertical slider is in the part where the "tray-ed" programs go). When I use my keyboard volume up and volume down buttons, I notice that the two controls respond APPROXIMATELY the same where one is slightly ahead of the other. If more information is needed, just ask.
View 5 Replies
View Related
Aug 3, 2010
The volume control in the Gnome panel system tray has disappeared from my wife's Ubuntu 10.04 system with the master volume set to zero.I was able to restore sound via System->Preferences->Sound master volume, but this is not particularly convienent. How do I restore the panel volume control? (the speaker icon on the panel, between the Network arrows and Chat/Mail setup icons).
View 3 Replies
View Related
Nov 12, 2010
Seeing this on two systems that went through F13-F14 upgrade.
version: gnome-applets-2.32.0-1.fc14.x86_64
symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click.
Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.
Anyone else seeing this, and better yet, have a solution?
View 1 Replies
View Related
May 17, 2011
So I just updated my IdeaPad to Natty and played around with Unity. The performane was absolutely unbearable so I installed Unity2D from the software center. Now when I start the session everything seems to be fine at first. Whenever I move the mouse over the panel though it seems to switch to my old gnome-panel from the "Classic" session (with some missing icons). When I move the mouse over that panel again it switches back to the Unity panel style. What is going on? Can I fix this somehow? I will have to use the classic session until I get a working consistent behavior
View 3 Replies
View Related
Mar 7, 2010
I'm having minor, but very annoying, issue in Kubuntu 9.10. Recently I installed the Gnome desktop to see if certain bugs I was experiencing were KDE-centric. I have since uninstalled Gnome (and reconfigured my audio drivers and reinstalled wicd, all of which was made short shrift of by Gnome), but one thing I can't get rid of is this annoying drum click sound in certain applications. All extension buttons in my browser now make the click sound, as well as the TrueCrypt GUI.
I know this is a very minor issue, but I've always configured my operating systems with absolutely no system sounds (only audio and video playback), so I'm finding this particularly distracting. Right now, the only option I have is to mute PCM volume, which also mutes streaming audio and video in my browser...
I'm at my wit's end. I have all sound notifications turned off in system settings (though there were relatively few to begin with in KDE). there's a magic sudo code I can cast to exorcise my computer of mouse click sounds.
View 9 Replies
View Related
Aug 6, 2011
Is there any option to disable mouse right click on ubuntu 11.04 in Gnome.
View 8 Replies
View Related
Aug 4, 2010
I was browsing the Internets trying to figure out how to completely disable the right-click button on my mouse. I am running openSUSE 11.3 with just Gnome and using a basic USB Dell model mouse with a scroll wheel. I am creating a Kiosk image and I have everything locked down except when a user is in Firefox they can still use the right-click button to bring up the menu to Bookmark this page and Save Page As, etc (If you right-click a webpage in Firefox you'll see what I'm talking about). I thought I could find an add-on for Firefox to disable this behavior but no such luck. I did find some references for Debian and Fedora, other distros besides openSUSE where you can modify the /etc/X11/xorg.conf file to disable the right mouse button. When I look in that directory on my openSUSE 11.3 system I just see /etc/X11/xorg.conf.install.
how can I disable the right-click ability on my mouse? This is the last step and I'll have a nice locked down Kiosk image ready to go running openSUSE 11.3.
View 1 Replies
View Related
Apr 29, 2010
I try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
View 4 Replies
View Related
Mar 13, 2010
About a week ago I installed some updates. What they were I don't remember. After I did that my mouse started acting up. Now about half the time when I single click it registers as a double click. Also when I click and drag to select text anywhere it'll randomly do another click screwing up that process.
So far I think the problem is when I press the left mouse button it registers the left click and then when I release, it randomly registers another left click.
The mouse itself works fine if I take it to another PC that's using windows.
OS: Ubuntu 9.10 64bit
Mouse: Microsoft Intellimouse 3.0
View 9 Replies
View Related
Feb 4, 2011
mouse menu different in 10.10, is there a way to make the mouse single click instead of double click?
View 2 Replies
View Related
Jan 14, 2009
where can I change the single click into a double click (because I'm a windows user (sorry!))? The mouse model does not support this.
View 4 Replies
View Related
Apr 13, 2011
when i click my mouse on something, it sometimes registers as two clicks. it doesn't happen all the time, but frequently enough to be annoying. for example, when i click a videos video to pause it, it often opens into fullscreen (which you normally click twice to do). also, in the url bar of chromium, i can't select the entire url by clicking. i now need to use ctrl+a. that's also because when i try to select the url, the highlight randomly disappears.
if i have multiple windows open, my click on the first "x" of the top-most window also closes the next window. i'm on linux mint 10. it's not really important, but it drives me crazy sometimes when my mouse doesn't work the way i want it to.
View 3 Replies
View Related
Aug 18, 2010
Code:
linux-uitj:/home/anisha # uname -a && cat /etc/*release
Linux linux-uitj 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux
openSUSE 11.2 (x86_64)
VERSION = 11.2
If I normally click the Trash icon either in Kmail or in Evolution more than one mail gets deleted in a sequential order! I have to press the click button extremely light to avoid this problem. I have confirmed this problem is not only with the Email clients but even with most other normal applications too. I have changed my mouse twice but the problem persists. Both were USB mice. Below I have provided log information :
Code:
linux-uitj:/home/anisha # dmesg | grep usb
[ 0.138267] usbcore: registered new interface driver usbfs
[ 0.138267] usbcore: registered new interface driver hub
[ 0.138267] usbcore: registered new device driver usb
[ 0.396952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.396956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.396958] usb usb1: Product: EHCI Host Controller
[Code]....
View 9 Replies
View Related
Apr 22, 2010
I'm here to ask if it is possible to change the tray icon for skype. It looks bad next to the rest of the tray icons.on this?Oh PS: the page I was looking at didn't have any solution to my problem
View 3 Replies
View Related
Jul 25, 2010
I installed Skype only because it is necessary to Pidgin to handle the Skype service/protocol. I use Pidgin for many protocols included the IRC, so I don't need Skype icon in the system tray at all. Honestly I hate Skype, but unfortunately it seems that all the world use it. how to take off that terrible icon/indicator/applet from the systray. I searched in all system to find a configuration file, I opened few named Skype using vi to avoid to damage them, but I have not found nothing interesting for my scope. PS: don't tell me how I will switch on or off Skype, because a plug-in of Pidgin do it w/o user interaction.
View 3 Replies
View Related
Jan 17, 2011
I'm running Kubuntu Meerkat. If I set skype to start minimized automatically, it seems that it's running but there's no way to get to it. It shows up in the process list but there's no icon for it in the taskbar or anywhere else on the screen. Even worse, I can't just kill and restart it; if I kill it, it just comes back. If I issue the skype command from the K menu or from a command line, I get a complaint that another instance is already running.
View 2 Replies
View Related
May 27, 2011
Wondering if any one else is having this problem lately under 11.4. My Skype does not want to launch any more. When I click to open Skype, the tray icon will pop up for 1 second and then just disappear. Have tried launching from command line to see if there are any messages, but it just says aborted when you try launch it.
I noticed this started happening randomly when I had the laptop in hibernate and then would resume, Skype would then just disappear and then I would just relaunch it and it would be find again.
View 5 Replies
View Related
Apr 11, 2010
It was working until a recent update. I have the icon in my system tray. Networkmanager is running. I have tried to reboot the computer and restart the network manager. All switches that could turn the network off is on. Every time I click on the icon in the system tray it tell me the networkmanager is disabled.
View 11 Replies
View Related
Apr 3, 2011
I don't know but just one day after I restarted my ubuntu 10.10 pc. Probably after an update. Dropbox no longer shows up in the top panel. I also had a thing called googsystray, that no longer shows up either. I can see the process dropbox is running.
View 1 Replies
View Related
Jul 19, 2011
I'm on Ubuntu 10.04 Lucid. I need to find the icon image files used by the Gnome panel tray apps, specifically, Banshee (see attached screenshot). It's not in /usr/share/pixmaps, as that banshee icon is used for the panflute launch button, not the Banshee tray icon. I imagine it would be where all the other tray icons are (volume, battery, etc). I'm looking for it so I can try editing it to fix the white background.
View 2 Replies
View Related
Dec 17, 2010
I need the steps to troubleshoot this:
If I:
1. Add drawer(s) on the gnome panel
2. add items to one or more of those drawers
3. reboot then:
1. all empty drawers can operate normally
2. drawers that have stuff in it cannot be opened.
View 2 Replies
View Related
Jul 3, 2010
I have two wifi routers. If I stand next to the main one with my laptop I can connect and access the internet no problem. The other router is in my office, and the bridging is messed up, so while I see the essid and bssid using 'iwlist scanning' and nm-tool, I can't connect to it.
Now, my main router's signal still reaches to my office, just not as strong as the borked router in my office. I need to be able to choose which wifi network to connect to without wasting time walking between rooms. I added entries for both in network-manager, but it doesn't show them in the list when I left click the tray icon! How the do I connect to the network I want?
View 1 Replies
View Related
Jul 2, 2010
Just upgraded my FC12 to 13 using preupgrade.On booting up into 13 my panel at the top of the screen that normally holds the menus/system tray etc doesn't seem to have initialised. It's just not there.I had a message about "no system tray detected on this system" which I assume is from one of the applications trying to start up in the systray.I've not found anything obvious in the logs, but then I may not be looking in the right places.
View 2 Replies
View Related
Aug 6, 2010
After upgraded to 11.3. Do a operation that active a network node, the Knetworkmananger will active a display on "Task Bar" (see figure 1). And it can't be minimized to "System Tray Panel", just can't be minimized to "Task Bar".
And the network list display pops up without all display some time (see figure 2), it's very boring.
If I kill the Kneworkmananger and restart it again, it will just have a Icon on "System Tray Panel" normally. But if it change to another network node automatically or I change it by clicking the icon, the display on "Task Tar" will appear and can't be resume to "System Tray", just like mentioned above.
I don't know why have this problem, I tried to reinstall the Knetworkmanager, but the problem also exist.
View 5 Replies
View Related
Jan 24, 2010
I want to move the system tray stuff (The wifi moniter etc..) to the bottom panel in xubuntu.
View 1 Replies
View Related
Jul 29, 2010
Is it possible to install Gnome-panel in Xfce? I'd like to completely replace xfce-panel with gnome-panel. It is possible the other way round so maybe this way too?
[url]
I tried xfce4-XfApplet-plugin but it doesn't work the way I would like to.
View 4 Replies
View Related
Apr 18, 2010
I've just returned to KDE after a long absence, and am wondering if there is a panel, system tray, or similar applet to disable/enable the screensaver. I know I can go into system settings, but what I'm after is something that's one click. It's for when I'm watching stuff like iplayer.
View 3 Replies
View Related
Jul 13, 2010
I do have internet cause I am using it on W7. The only thing that I have done different is I left the pc on over night so I guess it went to suspend for the first time. Then I powered off. After turning the pc back on and logging in I have no internet. Not even with the Ethernet plugged directly in. There is supposed to be a little blue light on when it sees the wireless and that is off. When I click on the networking icon in the system tray it says networking disabled. It shows no wireless. When I plug directly in I still get nothing. I'm using 10.04
View 2 Replies
View Related
Dec 4, 2010
Regarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
View 9 Replies
View Related