Recently i formatted my HDD into 5 partition namely :-
1) Win Vista
2) Ubuntu /
3) Home
4) Swp
5) EXT4 (Purpose is to share files between ubuntu and vista)
I'm wondering if its possible to install Virtual Box on both OS but pointing only to 1 virtual machine.
Also if its possible to permanently mount the shared partition on both OS.
I installed fedora 12 and windows 7 in pc. i can not access fedora partitions from windows. which software is suitable for this?
View 8 Replies View RelatedI have created 700 GB ext4 logical partition on my HDD. It is named sda7. Now I don't have read/write permissions, only root has those permissions.
How to change read/write permissions and how to mount it permanently?
1. What can I use to read/write to my ext4 file system in Win7 x64? 2. I use Macbuntu. Is there any way to get a translucent top bar 3. My computer seems to be running hot while on Ubuntu. The fan speed seems increased. It goes back to normal on Windows though.
View 2 Replies View RelatedI searched on googlehere on forum, but no one answer, how can I write on ext4 partitions?As root I can write!!Here some informations:
cat /etc/fstab
/dev/disk/by-id/ata-WDC_WD2500BEVT-75ZCT2_WD-WX20A5959889-part6 swap swap defaults 0 0
[code]....
I have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount read only ext4 partition from opensuse in /etc/fstab?
View 2 Replies View RelatedI can't see any option for recursive directories in nfs in fedora 13.
This is my set-up:
Code:
Code:
save and exit.
Code:
When i mount the directory /media/Data from another Fedora 13 box i don't have read and write permissions for each and every file. The -R recursive option would be handy unfortunately this option is unavailable. The red hat docs have not been helpful in this respect.
Code:
Code:
The mounted partition is of the ext3 type. With the nfs-3g type i don't have any issue however most of my directories/partitions are of the ext3 type so i need get it sorted.
I changed my user name id number to the same number on all boxes thus giving me write access. There must be a better solution than this.
I am trying to smbmount a Samba share to be used on my Ubuntu 10.04 desktop.I created a mount point
Code:
sudo mkdir /mnt/smb-sambaserv-myshare
and added the following to my fstab:
[code]...
I'm using Ubuntu 10.04 64bit (Kernel 2.6.32-22-generic) and sometimes my /home partition is remounting in read-only and i have no idea why. Normally I only use programms like Firefox, Rhythmbox, Evolution and Netbeans 6.8. Should I switch to the EXT3 filesystem?
dmesg shows me the following information:
Code:
[ 8758.010352] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8758.010356] ata7.00: failed command: FLUSH CACHE
[ 8758.010360] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 8758.010361] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8758.010363] ata7.00: status: { DRDY }
[ 8758.010366] ata7: hard resetting link .....
Code:
badblocks -v /dev/sdb
Checking blocks 0 to 78150743
Checking for bad blocks (read-only test): done
Pass completed, 0 bad blocks found.
I need a program that allows windows xp to read EXT4 partition. ext2explore.exe is not good, it doesn't give other windows applications direct access to ext4.
View 5 Replies View Relatedi have setup a samba server and created samba shares on it, i have configured the samba server to authenticates users from a windows server 2003 DC,
i have 2 shares call IT and MYSHARE, I want to give read and write permissions to sevaral users to those two shares and read only permisson to all the other users.
i tried editing the smb.conf file with the following settings , but no one can write or modify the files in the shares including the users specified in the
write list = cweerasinghe,njayarathna.
[IT]
writeable = Yes
browseable = yes
public = no
comment = IT share
[Code]....
how can i give access to the write list = cweerasinghe,njayarathna users to
read, write and modify the files in the shares ??
I just did a clean install of Ubuntu 10.04 and Linux Mint 9 with an ext4 (sda3) data partition to be shared between both. My issue is when I go to that partition and mount it within Nautilus it mounts read only. I've searched around but I have not found the solution. I don't have a problem mounting it using fstab and mounting at boot. But, I know I have to be doing something wrong for it not to work correctly through Nautilus.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 25G 3.2G 21G 14% /media/7e66f3a0-e35d-40b0-8427-4abfd3b53d8a
/dev/sda2 25G 9.8G 14G 42% /
/dev/sda3 56G 32G 21G 61% /media/data
I partitioned the drive like this. Ubuntu sda1 primary partition ext4 25gb, Mint sda2 primary partition ext4 25gb and Data primary partition 56gb. I then installed Ubuntu 10.04 first, then Mint. Both Ubuntu and Mint mount that partition as read only.
I have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount Read Only ext4 partition from Opensuse in /etc/fstab under Ubuntu?
View 3 Replies View RelatedI have a networked raid drive. Thecus 2100. Its running linux, and includes samba sharing. On that I have a folder shared. I can connect to and read and write from nautilus. No problems. However, I can't use other apps through that method. Its not really "mounting" that drive in the sense you'd normally think of (afaik).
If I try to mount the folder, no matter how I have tried so far (-t cifs, smbmount, etc), I can navigate the folders, but if I try to read any file I get a permission error. Looking at the permissions with 'ls -l', everything looks OK. The weird thing is, I can write a file, then read that file back as long as its the same session.
Just now I tried 'smbclient' with no special arguments. Just the server and path url. It asked for my password. Once I was in, I had no trouble getting files. I had a thread about this a while back and there were several links and all sorts of command line options to try, which I did, with no different outcome. I think its got to be something much simpler and more obvious. smbclient and nautilus seem to have no trouble. Anybody know what they're doing differently?
I've been reading for a while about samba but I haven't found a solution to my problem yet.I'd like to know if, the configuration I have in mind, is possible at all ("security = user" is what I'm using now).I want a directory to be:
1) read only for guests and some UNIX users;
2) write for some other UNIX users.
The advantage of this configuration would be that every single user in my LAN (with or without a UNIX account) would be able to read the content of the shared directory Music and I (UNIX user andrea) could manage the folder directly trough samba preserving the correct owner/group and permissions on the new files/folder created.
Notes about my configuration above:
1) as it is now every user gets authenticated by samba as nobody so even I (andrea) cannot write in it;
2) commenting out the line "guest ok = yes" I can authenticate as "andrea" and write in it but guest access is not possible any longer.
There is explore2fs, but it does not support ext4 filesystem.
View 1 Replies View RelatedI was wondering if anyone knows how to read write a ntfs partition on thats on a separate linux machine ?
Is that even possible from one linux machine to another ?
Is there an easy way to read/write to a mac partition inside ubuntu 11?
Any graphical ways to mount / umount?
On opening nautilus,it shows the XP ad Fedora partitions.Clicking on them mounts the partition.However,XP partitions are mounted in Read/write mode,whereas Fedora partition is mounted only in Read mode.What changes should i need to make in /etc/fstab to enable Read/Write access to Fedora partition as well?
View 9 Replies View RelatedAll my important data like ebooks and some programs are in a ntfs partition...when i login to my redhat i am unable to access that partition..
How to access(r/w) that partition in linux(Red Hat)?
I'm having difficulty making my FAT32 drive capable of read/write. I followed the instructions here (http://ubuntuguide.org/wiki/Ubuntu:Maverick#Windows_Compatibility) and added the following line to my /etc/fstab file:
Code:
/dev/sda4 /media/WinD vfat quiet,defaults,rw 0 0
However, when I rebooted the drive is still read-only
I have installed Debian on My Macbook Pro.
I want to be able to write to the HFS+ partition. I have disabled journaling on the HFS+ partion.
I have the following in my fstab:
But it still mounts as read-only.
I have installed Ubuntu 11.04 64 bit desktop version on ext4 partition without swap. I have maximus iv extreme motherboard with 8 Gbytes RAM. Using 3 internal ntfs formatted hard drives and 3 external ntfs usb 2.0 hard drives.When I am trying to copy or move files FROM or TO any ntfs partiton it is 90 percent chance it is going to freeze.For copy/moving files I am using krusader run as ROOT or as user without root privilege or Nautilus as user without root privilege. It wasn't possible to switch to another terminal - it simply does not react on keyboard or mouse input and only hard reset is possible (scares me because of ntfs disks)From this point of view I have suspicious on ntfs driver but:I am completely beginner in linux and I am looking for help to navigate me how to investigate to find what is causing the problem eventually to solve it?
According to my experience it seems to does not matter if hard disk is internal or external connected through SATA II or SATA III or USB 2.0. I have tried to manipulate with ntfspartitions through the vmware or virualbox or truecrypt software or just do a simplecopy/move files - it have has always the same results - freeze. There is not possible to say how long it is going to work properly and when it is going to freeze - sometimes it's working hour, sometimes it's working couple of seconds - no matter if it is read or write operation/s within ntfs partition.
i know that chmod +x makes a certain file executable but how do i make a file read and write.
View 3 Replies View RelatedI need some assistance mount a UFS2 partition as read and write. if its not possible, then I may have to copy a few hundred GBs of data. Currently using the command: Code: mount -r -t ufs -o ufstype=UFS2 /dev/sdb /Data Thats just read only.
View 7 Replies View RelatedI've extracted a few files through the archive manager through Ark (as well as through the command line) and some folders/files that were originally in Japanese are not properly displayed in the terminal or file browser. I can't delete them nor open them; I am informed that this file does not exist.I am running Kubuntu 11.04. I had a similar problem in Ubuntu 10.04 in that the text was not displayed properly, but the files were readable and writable.
View 2 Replies View RelatedAnybody know how to make an ext3 or 4 partition start up at boot with only the owner and its group having read and write access permissions.I don't want 'others' to have folder access. This is what i have done. / etc/fstab:/dev/sdb5/media/Data ext4 owner 1 2 The folder starts on the boot since it has been allocated a folder as u can see. Next i changed the the ownership and the group ownership of the folder:chown johnny:johnny /media/DataThe problem is that other users can few my partition since 'others' have read access. How do i change that to zero access?
View 1 Replies View RelatedHow do i disable the linux file cache on a xfs partition (both read an write).
We have a xfs partition over a hardware RAID that stores our RAW HD Video. Most of the shoots are 50-300gb each so the linux cache has a hit-rate of 0.001%.
I have tryed the sync option but it still fills up the cache when copinging the files. ( about 30x over per shoot :P )
/etc/fstab:
/dev/sdb1 /video xfs sync,noatime,nodiratime,logbufs=8 0 1
Im running debian lenny if it helps.
I need to allow non-root users to read/write on an ext3 partition.
Below is the relevant output from fdisk -l
Code:
The partition in question is /dev/sda4 and it is mounted as /Data (setup during installation).
Such as the title
View 2 Replies View Related