On opening nautilus,it shows the XP ad Fedora partitions.Clicking on them mounts the partition.However,XP partitions are mounted in Read/write mode,whereas Fedora partition is mounted only in Read mode.What changes should i need to make in /etc/fstab to enable Read/Write access to Fedora partition as well?
View 9 RepliesAnybody know how to make an ext3 or 4 partition start up at boot with only the owner and its group having read and write access permissions.I don't want 'others' to have folder access. This is what i have done. / etc/fstab:/dev/sdb5/media/Data ext4 owner 1 2 The folder starts on the boot since it has been allocated a folder as u can see. Next i changed the the ownership and the group ownership of the folder:chown johnny:johnny /media/DataThe problem is that other users can few my partition since 'others' have read access. How do i change that to zero access?
View 1 Replies View RelatedI have installed Ubuntu 11.04 64 bit desktop version on ext4 partition without swap. I have maximus iv extreme motherboard with 8 Gbytes RAM. Using 3 internal ntfs formatted hard drives and 3 external ntfs usb 2.0 hard drives.When I am trying to copy or move files FROM or TO any ntfs partiton it is 90 percent chance it is going to freeze.For copy/moving files I am using krusader run as ROOT or as user without root privilege or Nautilus as user without root privilege. It wasn't possible to switch to another terminal - it simply does not react on keyboard or mouse input and only hard reset is possible (scares me because of ntfs disks)From this point of view I have suspicious on ntfs driver but:I am completely beginner in linux and I am looking for help to navigate me how to investigate to find what is causing the problem eventually to solve it?
According to my experience it seems to does not matter if hard disk is internal or external connected through SATA II or SATA III or USB 2.0. I have tried to manipulate with ntfspartitions through the vmware or virualbox or truecrypt software or just do a simplecopy/move files - it have has always the same results - freeze. There is not possible to say how long it is going to work properly and when it is going to freeze - sometimes it's working hour, sometimes it's working couple of seconds - no matter if it is read or write operation/s within ntfs partition.
I am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
I'm looking to set up a server with attached mass storage device and tape autoloader to run linux. It's set up under Windows at the moment. Goal is to have users, connecting from individual workstations and laptops, backup their data to the linux server. On their personal machine, some users run linux, some MacOS, some Windows. I plan to set up the 5 500 GB drives as RAID5. I understand that if setting up as software raid the format is "physical volume for RAID". Under this setup, will Windows users be able to read/write and function as expected? I can't assume only linux user access.
View 3 Replies View RelatedWhat are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedI was wondering if anyone knows how to read write a ntfs partition on thats on a separate linux machine ?
Is that even possible from one linux machine to another ?
Is there an easy way to read/write to a mac partition inside ubuntu 11?
Any graphical ways to mount / umount?
I recently installed Ubuntu 10.04 using Wubi on an ACER Aspire 5000 XP laptop. Everything runs ok and I can access my Windows folders from Ubuntu through the host directory but only as Read Only. I have checked to make sure that the Windows folder I want to access (My Documents) is not designated as Read Only in Windows.
View 1 Replies View RelatedI'm using Arch right now and i'm having problems syncing my ipod with Amarok (KDE). Everytime I would want to sync a song, it would give me access denied. it is currently mounted at /tmp/ipodbxQtrU and i have tried using chmod with no luck. I was in root when i used "chmod -R user ipodbxQtrU" and it said operation not permitted.
View 1 Replies View RelatedAll my important data like ebooks and some programs are in a ntfs partition...when i login to my redhat i am unable to access that partition..
How to access(r/w) that partition in linux(Red Hat)?
I have apache2 running on my computer. I want to change the permissions for /var/www/ so that I can edit the files without a problem. Right now I can use the gksudo command, but I'd like to be able to have all the files available when using an IDE like eclipse.
I've read in several places that
Code:
chmod 755 /var/www
will do, but if I'm not mistaken that would give read/write access to anyone. I'm not in a production environment, so I'm not too worried about security, but I'd like to give anyone else as less permissions as possible. Would this be possible?
I had to reinstall Ubuntu (Natty) on a brand new computer and while installing I setup the datas partition to be mounted in /usr but now I can't have access to files I put in there even if I setup the group/user permission! I can accezz /usr/Music but all files are locked
View 5 Replies View RelatedI'm having difficulty making my FAT32 drive capable of read/write. I followed the instructions here (http://ubuntuguide.org/wiki/Ubuntu:Maverick#Windows_Compatibility) and added the following line to my /etc/fstab file:
Code:
/dev/sda4 /media/WinD vfat quiet,defaults,rw 0 0
However, when I rebooted the drive is still read-only
Recently i formatted my HDD into 5 partition namely :-
1) Win Vista
2) Ubuntu /
3) Home
4) Swp
5) EXT4 (Purpose is to share files between ubuntu and vista)
I'm wondering if its possible to install Virtual Box on both OS but pointing only to 1 virtual machine.
Also if its possible to permanently mount the shared partition on both OS.
I have installed Debian on My Macbook Pro.
I want to be able to write to the HFS+ partition. I have disabled journaling on the HFS+ partion.
I have the following in my fstab:
But it still mounts as read-only.
I installed fedora 12 and windows 7 in pc. i can not access fedora partitions from windows. which software is suitable for this?
View 8 Replies View RelatedI own a particular file on a Linux system. I would like to give 2 groups (accounting, shipping) read access and only read access, and 3 users(Mike, Raj and Wally) write access and only write access. How can I accomplish this?
View 3 Replies View RelatedI'm having this problem wherein the ppp program is altering the /etc/resolv.conf file when connecting.This, despite me having set file permissions to read-only. What could be the problem here?
View 9 Replies View RelatedI need some assistance mount a UFS2 partition as read and write. if its not possible, then I may have to copy a few hundred GBs of data. Currently using the command: Code: mount -r -t ufs -o ufstype=UFS2 /dev/sdb /Data Thats just read only.
View 7 Replies View RelatedHow do i disable the linux file cache on a xfs partition (both read an write).
We have a xfs partition over a hardware RAID that stores our RAW HD Video. Most of the shoots are 50-300gb each so the linux cache has a hit-rate of 0.001%.
I have tryed the sync option but it still fills up the cache when copinging the files. ( about 30x over per shoot :P )
/etc/fstab:
/dev/sdb1 /video xfs sync,noatime,nodiratime,logbufs=8 0 1
Im running debian lenny if it helps.
I need to allow non-root users to read/write on an ext3 partition.
Below is the relevant output from fdisk -l
Code:
The partition in question is /dev/sda4 and it is mounted as /Data (setup during installation).
I'm setting up Ubuntu Karmic on my sister's old computer for my nephew, he's quite young so my sister asked to install some content filtering. I'll first setup an OpenDNS account and I've installed and managed to get dansguardian and squid working on a virtual machine to try it out. so far it's working pretty well, but I need to secure it form the inside out.
I was thinking of blocking specific outbound ports so he could not bypass the proxy. because by default the firefox configuration can be easily changed. so I have a couple of questions.
1. is it possible to block outgoing ports on Ubuntu?
2. is that the best method?
3. is there anything else I should be aware of to prevent subversion?
lastly, this question is probably unrelated to this board but I've set up a cron job to update a dynamic ip with OpenDNS, the problem is that the password is in clear text in the user's crontab, can I play with permissions? is it possible to run the job under a root account and deny read/write access to a normal user?
I have recently installed Debian on my NAS server. I have also configured Samba for sharing the home directory of a nas user i.e. /home/nas To this directory I have read/write from a windows machine using the nas user credentials. When I mount my RAID partition /dev/md0p1 to the /home/nas directory, I then realize that all content in this directory (files and subfolders) is only owned by the root user. When trying to access from the windows machine the /home/nas directory, I do not have any write access, only read. I have tried both the nas and the root user credentials.
I have also attempted the change the ownership of the mounted RAID partition to the nas user with the -R recursive option, but I get for the internal files/subfolders an error "operation not supported".
How can I overcome this problem? - Is there something not done properly in the /dev/md0 array definition (i.e. ARRAY /dev/md0 level=raid1 num-devices=2 UUID=bddf8b69:c97967b5:cb104784:7fef7cc3 )?- Is there something not done properly in the /dev/md0p1 mounting (i.e. mount /dev/md0p1 /home/nas)?- Should I do any extra configuration before the mounting etc? I would really appreciate any kind of help I could get.
Some background info
b) After OS boot, when I do a:
# cat /proc/mdstat,
I get:
Personalities : [raid1]
md0 : active (auto-read-only) raid1 sda1[0] sdb1[1]
4200896 blocks
unused devices: <none>
[Code]...
I have an Iomega External Hard Drive 1TB. Problem: Unable to write to Ext3 Partition. How I got here: Started off with going into windows and shrinking it's current NTFS partition down by 50GB. Then used an Ubuntu LiveCD to gain access to GParted and with that 50GB free I formatted it with an Ext3 system. It does this no problems. I then can't write anything to this partition? I've tried doing "chmod 777 /dev/sdb2" but it says Operation not Permitted.
EDIT: Need to be able to use it on YDL 6.2 on my PS3, YDL doesn't have NTFS write support and I want to transfer files larger than 4GB rendering Fat32 useless. No I'm not able to re-size or compress this large file.
Ive managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?
View 7 Replies View RelatedI saw a lot of people asking this question on the net and most (if not all) answers points out to disabling journaling on that partition, which is not always a good idea.
So here is 1-2-3 style how to mount HFS+ partition in Ubuntu, so that you are able to write on it:
1) sudo apt-get install hfsplus hfsprogs hfsutils
2) mount -o force -t hfsplus /dev/XXX /mnt/v
I am a total noob when it comes to opensuse. I just read the reviews and comments from forums taht's why I wanna try this alternative. I have 1 physical drive that has two partitions. 1 is dedicated for my windows OS (20 GB) and the other for my data (approx. 100GB).
How can I install opensuse 11.3 to just 1 partition (20GB) and leave my data partition (approx. 100GB) as it is? Can I still view/access/read the files from my data partition after I have successfully install opensuse 11.3 to my Os partition?
I can't see any option for recursive directories in nfs in fedora 13.
This is my set-up:
Code:
Code:
save and exit.
Code:
When i mount the directory /media/Data from another Fedora 13 box i don't have read and write permissions for each and every file. The -R recursive option would be handy unfortunately this option is unavailable. The red hat docs have not been helpful in this respect.
Code:
Code:
The mounted partition is of the ext3 type. With the nfs-3g type i don't have any issue however most of my directories/partitions are of the ext3 type so i need get it sorted.
I changed my user name id number to the same number on all boxes thus giving me write access. There must be a better solution than this.
I installed SAMBA and SWAT, latest versions. What I want to accomplish is to give Windows users unlimited read/write access to the entire filesystem, eg. (/). Barring that, I'd like to at least be able to configure full access to individual directories.And by "unlimited", I mean being able to edit and delete everything that would be normally accessible only by the root user. I want to grant the Windows users of the shares access as if they were root users.
View 2 Replies View Related