I searched on googlehere on forum, but no one answer, how can I write on ext4 partitions?As root I can write!!Here some informations:
cat /etc/fstab
/dev/disk/by-id/ata-WDC_WD2500BEVT-75ZCT2_WD-WX20A5959889-part6 swap swap defaults 0 0
[code]....
I installed fedora 12 and windows 7 in pc. i can not access fedora partitions from windows. which software is suitable for this?
View 8 Replies View RelatedI have created 700 GB ext4 logical partition on my HDD. It is named sda7. Now I don't have read/write permissions, only root has those permissions.
How to change read/write permissions and how to mount it permanently?
1. What can I use to read/write to my ext4 file system in Win7 x64? 2. I use Macbuntu. Is there any way to get a translucent top bar 3. My computer seems to be running hot while on Ubuntu. The fan speed seems increased. It goes back to normal on Windows though.
View 2 Replies View RelatedRecently i formatted my HDD into 5 partition namely :-
1) Win Vista
2) Ubuntu /
3) Home
4) Swp
5) EXT4 (Purpose is to share files between ubuntu and vista)
I'm wondering if its possible to install Virtual Box on both OS but pointing only to 1 virtual machine.
Also if its possible to permanently mount the shared partition on both OS.
I switched a external 500GB usb HD from FAT to ext4, because the box it's on no longer has windows.It mounts fine and I can read it - but not write.I have some inkling as to what to do, but prefer your opinions first.
View 9 Replies View RelatedI have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount Read Only ext4 partition from Opensuse in /etc/fstab under Ubuntu?
View 3 Replies View RelatedI want to use dual Monitor on Debian Lenny amd64, I have the nVidia 8600 GTS. I googled several times, I have to change the xorg.conf (as it seems) but I can't - no rights.
And there's another thing... I have a dual boot system along with the openSUSE HDD but I can't open it. And using openSUSE I can't read or write on the Debian's HDD. How can I change that?
My wife is purchasing a netbook with no internal CD/DVD writing device, so we plan to purchase an external CD/DVD USB-2.0 read/write device. Our local PC shop has the following 3 external USB-2.0 DVD read/write devices:
(a) Samsung DVD-Burner SE-S084F/RSBS [not listed on Samsung site - too old ? ]
(b) LG DVD-Burner GE24NU21 USB2.0 [not listed on LG site - too old ? ]
(c) Super-Multi Portable DVD Rewrite (GP10 Lite USB2.0 Slimline) GP10NB20 (mentions Mac OS/X support, which is encouraging)
None of those are listed in the openSUSE HCL. Has anyone successfully used any of these with GNU/Linux (my google surfing on this revealed no GNU/Linux complaint nor any success stories) ? Or is there another such external USB-2.0 read/write DVD burner device that is recommended ?
I need some assistance mount a UFS2 partition as read and write. if its not possible, then I may have to copy a few hundred GBs of data. Currently using the command: Code: mount -r -t ufs -o ufstype=UFS2 /dev/sdb /Data Thats just read only.
View 7 Replies View RelatedWhat are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedFollowing the last update bringing kmail 2.0.89 it does not start any more. I get a popup signaling a fatal error : "no read/write permission to your inbox folder". But these permissions have not changed. And even if I move away the Mail folder and try to start kmail I get the same message.
[code]...
This kmail version given by YAST is : 4.5.80-261.1
I get this error message with KINO.
WARNING: raw1394 kernel module not loaded or failure to read/write /dev/raw1394!
There is explore2fs, but it does not support ext4 filesystem.
View 1 Replies View RelatedI have 4 partitions. One is Ext4 for Karmic, one is NTFS for WinXP, and the other two are Ext4 where I keep all my stuff.When I boot into Karmic and open Nautilus, none of the last three are auto mounted. When I click on one of them, instead of a window popping out asking me for a sudo password, I get a message as shown below.f I try to mount via sudo in terminal it works, but the files for me are then all read-only. Again, if I open Nautilus as root, all works fine.What I want is the following:- for all 3 partitions to automount on startup;- for all 3 partitions to be owned by me and not by root.I tried editing /etc/fstab, but to no avail. Neither did running "chown" help.
/etc/fstab:
# /etc/fstab: static file system information.
#
[code]....
I have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount read only ext4 partition from opensuse in /etc/fstab?
View 2 Replies View RelatedI want to install 11.04 next to my working 10.04 system. First I need to make room for the new system so I have booted from a live cd and started GParted. In GParted the partition with the 10.04 system on it, /dev/sda1, has a red circle with an exclamation mark in it and I cannot resize it. When I doubleclick on /dev/sda1 there is the following warning
Quote:
Failed to change to directory '.'(Stale NFS file handle)
Failed to change to directory '.'(Stale NFS file handle)
Unable to read the contents of this file system!
Because of this some operations may be unavailable.
The following list of software packages is required for ext4 file system support: e2fsprogs v1.41+.
The 10.04 system is working and has worked like a dream for a couple of years and the machine has never had any other system on it. Why would the live CD not be able to read ext4 fs?
I need a program that allows windows xp to read EXT4 partition. ext2explore.exe is not good, it doesn't give other windows applications direct access to ext4.
View 5 Replies View RelatedI'm using Ubuntu 10.04 64bit (Kernel 2.6.32-22-generic) and sometimes my /home partition is remounting in read-only and i have no idea why. Normally I only use programms like Firefox, Rhythmbox, Evolution and Netbeans 6.8. Should I switch to the EXT3 filesystem?
dmesg shows me the following information:
Code:
[ 8758.010352] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 8758.010356] ata7.00: failed command: FLUSH CACHE
[ 8758.010360] ata7.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 8758.010361] res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 8758.010363] ata7.00: status: { DRDY }
[ 8758.010366] ata7: hard resetting link .....
Code:
badblocks -v /dev/sdb
Checking blocks 0 to 78150743
Checking for bad blocks (read-only test): done
Pass completed, 0 bad blocks found.
I compiled a kernel using a previous kernel config after I switched to the ext4 file system. Previously it was using ext3 and the kernel compiled and ran fine. I added support for ext4 to the config but when I went to boot I had a kernel panic. The error was "kernel can't mount vfs on (8,5)". Root is on sda5, I don't know what the 8 is. I started over, using mrproper and made a new config, but got the same error. I created an initrd with the ext4 file system but then the kernel said it couldn't mount root on ext3 because of unique options. (something along those lines) I booted back into the default kernel and saw that it had a similar error right after the bios check, but it loaded fine. I'm wondering why the kernel is saying that the ext4 file system is ext3.
View 11 Replies View RelatedI created 3 partitions on my usb stick, one is vfat, one ist ntfs and one is ext4.And i formated them like this:
Code:
mkfs.vfat -F32 /dev/sdg1
mkfs.ext4 /dev/sdg2
[code]....
I just did a clean install of Ubuntu 10.04 and Linux Mint 9 with an ext4 (sda3) data partition to be shared between both. My issue is when I go to that partition and mount it within Nautilus it mounts read only. I've searched around but I have not found the solution. I don't have a problem mounting it using fstab and mounting at boot. But, I know I have to be doing something wrong for it not to work correctly through Nautilus.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 25G 3.2G 21G 14% /media/7e66f3a0-e35d-40b0-8427-4abfd3b53d8a
/dev/sda2 25G 9.8G 14G 42% /
/dev/sda3 56G 32G 21G 61% /media/data
I partitioned the drive like this. Ubuntu sda1 primary partition ext4 25gb, Mint sda2 primary partition ext4 25gb and Data primary partition 56gb. I then installed Ubuntu 10.04 first, then Mint. Both Ubuntu and Mint mount that partition as read only.
I have been missing disc space in my / partion. Was 20Go.I deleted a unsed partition and then increase my / partition to 133 Go.Did this in yast and can see that the partition has this size. But when I restart my suse, the size of the partition remains to 20Go.
View 9 Replies View RelatedI did install QLandkartGT and the plugin to use Garmin with it and it looks like it work, but when I do press "Live Log" I get the error message; "Device Link Error. Failed to request real time position. Realtime thread failed. Failed to configure USB: could not set config 1: Operating not permitted".
I also get a similar error when trying to download tracks; "Failed to download tracks. Failed to configure USB: could not set config 1: Operation not premitted".
My guess is that Ubuntu do not allow programs to use the USB port, so my question is how I do allow this program (or all) to use the USB ports.
I can't see any option for recursive directories in nfs in fedora 13.
This is my set-up:
Code:
Code:
save and exit.
Code:
When i mount the directory /media/Data from another Fedora 13 box i don't have read and write permissions for each and every file. The -R recursive option would be handy unfortunately this option is unavailable. The red hat docs have not been helpful in this respect.
Code:
Code:
The mounted partition is of the ext3 type. With the nfs-3g type i don't have any issue however most of my directories/partitions are of the ext3 type so i need get it sorted.
I changed my user name id number to the same number on all boxes thus giving me write access. There must be a better solution than this.
I just installed Ubuntu 10.04 on my system, and I put in a really old game CD for my really old computer. I cannot run the setup program , however because "it is not executable". I can't change this , because it is read-onlybut I can't chane this either. As I'm new to this, I was wondering .
View 5 Replies View RelatedI have a netbook with Ubuntu 10.10 installed in it,and a Pc with also ubuntu 10.10 in it , but x86_64.
I want to copy some iso files and data from my user home directory on the netbook , to the user home directory of the other pc , using a 8 GB usb formated in ext3 with gparted in my pc.
One iso is a windows 7 one to burn then with K3b , as i need to have windows installed in that box. Also of another iso that i have to burn too (windows 7 recovery disk) , and 3 anti-virus trials for windows.
As the usb is owned by the root (or more properly the mounting point,no?), and i can't use my user to copy data to it i usually do :
Usually , what i use is "sudo nautilus" then go to the place where is the data , copy it , and paste it then in the usb. Then in the other pc i do a chgrp and chown to the iso or file.
But , perhaps this is not the better approach. I have investigated a bit , and i think that i have found a better way , but i have some dudes.
The method is change the owner,group and permissions of the mounting point:
Code:
cd /media
ls
umount /dev/sdb1
sudo mkdir usb
[Code].....
If i do this steps in both computers, with each user,in the netbook i can copy the iso to the usb (as fox can write to the mount point of the usb ), but can the other user in the pc 'mulder' read the iso , so be copied to /home/mulder, and then be able to burn it in k3b with success ?
I suppose that having 766 , it should be able to read it , but would have the own of the file ?
How important is not to only be able to read it , but also own it ?
I suppose if the user ID is the same , wouldn't be any problem ,as each ubuntu would supose that the file is owned by their user.
Perhaps the user name change,but if the ID is the same , the user is the same for ubuntu , not any different, no ?
sudden of all all USB drives and sticks I put into a PC will not mount with read/write permissions (they did before). I can still copy to them, but only when I am root. I am on Maverick I've noticed though that if I run disk utility, then UNMOUNT the partition, Check File System, Mount the partition back, I get read/write access..
View 9 Replies View RelatedRecently i acquired an electroencephalograph (EEG) and started to experiment with it, and i need some way to write or send a couple of Hex numbers to the EEG so it will start working, and then to save the data on text file, or at the very least see the output on the terminal using C or C++, i found some programs around the forums but none seem to work properly and more often than not, The EEG is recognized as /dev/ttyUSB0 has a baud rate of 921600.
View 2 Replies View RelatedI installed SAMBA and SWAT, latest versions. What I want to accomplish is to give Windows users unlimited read/write access to the entire filesystem, eg. (/). Barring that, I'd like to at least be able to configure full access to individual directories.And by "unlimited", I mean being able to edit and delete everything that would be normally accessible only by the root user. I want to grant the Windows users of the shares access as if they were root users.
View 2 Replies View Related