Im trying to set a up a home network at my house. I have a desktop computer, and 2 laptops. I was thinking of using my desktop as a server, is this possible? What I mean by home network is that the Admin of the server is the Network admin, and all the computers share drives but have restricted access to changing things but can run the sudo command. Would this be possible to make?
View 4 Repliesmy wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View RelatedCurrently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
I am new to Ubuntu, and I have just installed version 9.10 on my desktop PC. I need to connect my computer to my home network. Right now, I have no connection and cannot detect any of the hardware when running Ubuntu. When I switch over to my Windows XP partition, everything works fine.
View 8 Replies View RelatedIWithout having made any configuration changes (that I am conscious of), for the past few days I have been unable to connect to my home network - and hence to the internet.My 64-bit Kubuntu (10.4) is on a dual boot machine.If I boot XP then things work as they have done for the past year or so - no network connection problems at all. So I know it's not hardware, LAN or router/cable-modem related. In addition none of the other systems on the network have a problem.
I tried to check if there are some firewall settings that might have changed - but cannot seem to find anything about the firewall in my Kubuntu set-up. Indeed I cannot figure out how to do any problem source identification.
I've been using Ubuntu 10.10 for 2 days and there's one problem left to solve. It cannot connect to my home encrypted wifi but it has no problem connecting to open wifi. I used this site [URL] to change my wifipassword but it still doesn't work. Interestingly my Windows partition connects to it without any change so I don't even know if I'm really changing the password. The router is a Linksys WRT54G2. How can I change the wifi password, know what it is, and make sure Ubuntu knows how to connect to it?
View 2 Replies View RelatedAs a user who is comfortable setting up a peer to peer network in Windows, how do I set up a simple peer to peer network with shares, on a standard network infrastructure (ethernet and basic dlink router), using Linux? I have two computers with Ubuntu 10.04, and would like to share files between them.Do I need to set static IP's? Why is only Windows network showing in Places/Networks?
Question two: I have 3 Windows computers (2 = XP, 1 = Win7) on my network, all with shares. When I try to access the windows shares from an Ubuntu machine, I can connect to some shares on some computers without being asked for credentials, however on other shares I am asked for credentials, but the credentials aren't accepted.I am assuming that domain = workgroup, so I enter in the workgroup name, but the dialogue refuses to let me in.
I'm having some difficulties setting up my ubuntu home server. I have vsftpd installed on my server, and I am able to use it perfectly when I am outside of my home. However, whenever I attempt to access my server through FTP from my desktop, it does not work. The file in question will load VERY SLOWLY to about 8% then the connection will drop out.My desktop and server are connected to the same router, and I feel as though this may be the issue.or vsftpd in a special way to access it through LAN?What I am trying to do specifically is use Comicpress (a Wordpress plugin) to upload comics to my server, with no luck.
View 1 Replies View Relatedwhat's the command to check who is currently on my home network?
View 5 Replies View RelatedI have 4 computers at home: 1 XP, 1 Laptop w/ Win7, 1 Mac, and 1 Ubuntu (hey, I like to try most everything). Anyway, I'm wanting to set up a home server to save everything on so that I don't have 3-4 copies of one file floating around. I was planning on using Ubuntu because I've always heard that Linux is a good system for a server and that Ubuntu is one of the easiest to work with.
Anyway, I just installed the Ubuntu OS, and the only software that I installed with it was Samba (I don't have a printer hooked up to this computer). Is samba the best software to use for this, or is there any other option that would be easier to use? I've heard that with samba there are a lot of things you have to change using the CLI (something about chmod, whatever that is, and others like it), which doesn't bother me, I've used CLI since the years before Windows, good ol' DOS.
I just built a computer that I'm going to use as a home network server for our music, pix, etc. I installed and it was working for a few minutes then just disappeared... I have no idea what happened, but here is my config file... and to note, we have 2 ubuntu desktops running on the network and 1 windows7 pc... Havent even attempted the windows part yet, so if you want to help with that too,
[Code]...
I'm running the newest version of Ubuntu on a usb while I have a hard drive problem with win7. Internet problem is that I'm using a D-link N USB adapter to connect- it recognises my home network, even looks like it's connected, but nothing happening.
View 2 Replies View RelatedI am looking to set up a home network server on an old PC. I want to be able to access files on the network hard drive in the PC, stream video or music from the "server", and use the computer as a regular desktop connected to TV as a monitor. I tried setting up an FTP server and that worked for transferring files but failed to get a good connection for streaming or fast transfers.
Was less then 1MB a second. I tried setting up a shared folder but ran into several permission errors between the host PC and the laptop that that connected to the shared folder. which way to go with this to get what I want out of it. I know if can be done just not sure how to do it.
Iam trying to get samba work with no password on my home network. I want to have Writeble permissions for creating files and folders and sub folders in the shared folder with no password needed.
I have this set up
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code].....
I can access the /home/seb/ directory but cant write in it. And with the same permissions for the down directory I cant even access the folder from the other pc it only says "Could not display "smb://laptop/down".The file is of an unknown type"
And finally how can I clean up the smb.conf so it is readable?
Just installed 10.04 LTS beta on 3 computers in home. At first, two of them showed up under the network window using places. The third never did and would not find the shared printer. After all rebooted, none show up. All three can access the internet and can display a valid internal network ip address using ifconfig.
View 1 Replies View RelatedI recently upgraded to ubuntu10.04 LTS via update manager. Previous version was 10.04 beta. After upgrading I am facing very strange problem.
1) If I start my laptop with network connection then all the folder under /home get disappear. When I do ls -l /home it says no folder found. As all the folder under home is disappearing it is giving so many errors when I login and as a result of this I am not able to start the gnome UI.
I tried to mkdir under home and it says cannot create directory.
I tried with root login but same error.
2) But it if I start my laptop without any network connection then I am able to see all the folders under /home and able to login successfully without any error.
I tried to mkdir under home and it was successfully.
3) I also tried this option, first start the laptop without any network connection and login successfully ( Able to see all folder under /home) but as soon as I plug the network cable and once it is connected all folder under /home disappear and system starts failing.
How to recover that user as I am having that user since ubuntu8.04 and lots of data and customization is there. My previous 10.04 beta version was working perfectly.
This is my first ever time trying out a Linux based system and I would like to ask a quick question. When you plug in your cd/flash drive it comes up with the option to try Ubuntu before installing it on your hard drive. When I go to try I can't connect to my home network. Is this because it is in the try mode? Or something else?
View 4 Replies View RelatedI recently installed Xubuntu 10.04 on my desktop computer that had a USB wireless adapter DLink DWA-140. I didn't have to install any additional drivers to get it to work. I put in the network SSID and the password and was connected immediately. However, when I try starting firefox it doesn't load any sites. Can anyone help me in approaching this problem. I have a DLink DIR-655 router. If I should gather more information to get this problem solved then please let me know and I will do so.
Edit: Now I am unable to connect to the network. When I click the network icon in the taskbar, my home network is not visible while it is visible under another ubuntu computer I'm running.
I have a beefy Win Box desktop that i'm using as a media server and i have a home network setup already using windows xp. I had everything running fine and the PC connects flawlessly to my Bravia TV and both my ps3's so i know the network and sharing settings are setup just fine. Anyways i got tired of all the Windows 7 BS and decided i would once again use Ubuntu on my Toshiba netbook. So the question is how in the heck do i get my Ubuntu netbook to connect to the Desktop? I've tried browsing the fourms but either i'm missing something of just a little slow. What "extensions" would i need to get and how would i go about implementing it from there?
View 3 Replies View RelatedFor the first time networking my home computers I'm not interested in getting Ubuntu boxes to to talk to Windows and we now have Ubuntu on all machines.
I'm trying to use the "Personal Files Sharing Preferences" but there is a message telling me I require some packages. Most unlike Ubuntu but it doesn't tell me what packages I do need.
Uploaded with ImageShack.us
What I would really like to do is have access to sertain directory's on other computers and have full access to read/write within the home directory.
I installed Ubuntu 10.04 32-bit on an old desktop (1.5ghz Pentium 4, 20GB hard drive, 768MB RAM) a week or two ago, at the same time that I installed Xubuntu 10.04 on an even lower performance IBM tower server. The server functions perfectly and my other (Windows XP) desktop recognized it from the start, as did the Ubuntu desktop. However, I rearranged a few ethernet cables the other day without turning off the desktops and ever since my Ubuntu machine does not recognize my server, even though all of the devices are connected via ethernet cable to a linksys router and it connects to the internet without a problem. I'm a linux newbie - this is my first move away from Windows - and I don't know where to turn. Far more confusing is the fact that, when I boot from a LiveCD, the network is recognized and I can read/manipulate files on my server without a problem. Oh, and I briefly flirted with OpenSUSE KDE (not as noob-friendly as Ubuntu, so I'm back) and encountered the same problem.
Needless to say, booting from the hard drive is preferable to booting from CD every time
I have an Acer Aspire One -532h and i just installed ubuntu 10. I am trying to crack my own Wep network at home with Aircrack-ng. So after i installed Ubuntu and installed everything in "updatemanager", i installed Aircrack,Macchanger. And as i look in "iwconfig" and ifconfig i see the Atheros driver Ath9k and Wlan0. Now my 1st question. Do i have to install madwifi or such for the aircrack to inject?
2:nd I have tried to install madwifi also but when aireplay-ng want to inject ,the whole computer freezes. How do i fix this?....have looked aound google and found that many have the same trouble...
why my VCN will not allow me to connect from my phone outside of my home network... When I do open up remote desktop it changes what it says... one day it says only available through Name.Local and then the other day it shows the IP address and says over the local network. I have tried going into gconf-editor and messing around but it still doesn't seem to work.. I'm not entirely sure how to mess around with my router.. and if that is necessary..
View 5 Replies View RelatedSo I finally successfully installed Ubuntu 10.10, but I can't access my home wireless network. I dual booted with Windows 7, and it detects my local wireless network, asks for the key and connects correctly. In Ubuntu, I have to plug in an ethernet cable to access the internet (like I am now). Ubuntu doesn't detect the network, and I tried "Create New Wireless Network..." up the top right, but it doesn't connect.
View 6 Replies View RelatedI have three PC's. PC-1 is a newish Dell Vostro 320 running Win 7 as the prime OS with Ubuntu Linux 10.10 dual boot under the control of EasyBCD. PC-2 is a Dell Inspiron 6400 running Ubuntu Linux (10.10). PC-3 is an oldish Dell Inspiron 6000 laptop dual booting Win 7 and Ubuntu 10.10. All three PC's share a DSL connection to our ISP and network using the wireless router capability of the DSL box (a Billion 7401 VGP-M). All three PC's can access the internet using the DSL box both wired and wirelessly under Windows or under Linux. PC-1 is the primary PC and runs Win 7.
PC-2 (Ubuntu 10.10) is running fantastically well and can access PC-1 running Win7 as a member of WORKGROUP for print sharing and for file sharing. The primary PC-1 can also see the files on PC-2 as a member of a Windows WORKGROUP. Simple home networking is working as it should with this setup (PC-1 under Win 7 and PC-2 under Ubuntu 10.10). This has been like this since the installation of Ubuntu on PC-2, which included setting up network printing from PC-1 (Win 7) under Samba.
The problem is thus: If I boot PC-1 or PC-3 up under Linux, I lose all networking capability between the three PC's including print and file sharing, but they can all access the internet through wireless or wired connection. I have configured Samba and done all the home networking troubleshooting especially:[URL]..All to no avail. As I said, my aim to ditch Windows and move all three PC's to Linux but I can't do this unless I can get Linux home networking working properly. By properly, I mean all PC's running Linux or two under Linux and one under Windows 7 and be able to share files and a printer attached to PC-1. I am a Linux virgin and am hoping that a knowledgeable person can tell me what's going wrong and point me to setting up a simple home network under Linux. It shouldn't be this hard.
I am trying to set a Ubuntu home server to be a Network Attached Drive, a Media server, and Backup server.All of the computers (mostly windows 7 machines) can see and connect with the shared ubuntu folders, and read write and execute files into the folders. The problem is when programs are installed onto the server they operating systems cannot have "Full control", or change the owner of a file.
This is an issue when using the Ubuntu shared folders as remote hard drive locations because when Windows goes to run the files it keeps popping up with the "Open file - Security Warning" preventing files from being natively run.
Is there any good NVR software available to use with my network cam as a home grown security solution?I have tried Zoneminder but for some unknown reasons it doesn't work for me.
View 2 Replies View RelatedI have read that i can backup the entire system with the home folder with commands, or with programs, such as clonezilla, but it doesnt work, so im trying to back it up with commands now but i cant find a good tutorial to explain what commands to use.
View 9 Replies View RelatedHow's the quality of the sound that gets to your loudspeakers? What components do you have - brand, specs, mode and distance of computer to amplifier?[URL].. Mid and bass sound good.
[Code]...