I just built a computer that I'm going to use as a home network server for our music, pix, etc. I installed and it was working for a few minutes then just disappeared... I have no idea what happened, but here is my config file... and to note, we have 2 ubuntu desktops running on the network and 1 windows7 pc... Havent even attempted the windows part yet, so if you want to help with that too,
[Code]...
I have a debian home server right now, I'm using samba for my file server but I was wanting to stream my movies and music to my other computers. My family (the other users on the network) are NOT computer savvy, and to top it off they are using both Windows (xp) and Mac (Snow Leopard) machines. So I'm looking for software that is simple to use that will allow other operating systems to use it. I would think the easiest way would be to stream the music/movies through a home website. I have seen quite a few programs out there that stream music, but none for movies.
View 3 Replies View RelatedI'm having some difficulties setting up my ubuntu home server. I have vsftpd installed on my server, and I am able to use it perfectly when I am outside of my home. However, whenever I attempt to access my server through FTP from my desktop, it does not work. The file in question will load VERY SLOWLY to about 8% then the connection will drop out.My desktop and server are connected to the same router, and I feel as though this may be the issue.or vsftpd in a special way to access it through LAN?What I am trying to do specifically is use Comicpress (a Wordpress plugin) to upload comics to my server, with no luck.
View 1 Replies View RelatedI've been building my digital music collection for some time and used to house it on a local drive with no quality issues. A while back I built myself a file server using ubuntu and mdadm in a raid1 configuration to protect against potential drive failure. I link my iTunes library to the music files via a samba share and everything works great on the surface. I've started to notice that random songs are becoming corrupted with pops clicks and silent pauses. I'll even re-download an album and notice that it's corrupted a few weeks later. Now I'm at a loss to what is causing this issue; I ignored it at first but it seems to be getting worse and more widespread as time goes on.
Do you think this could be caused by mdadm? It reports that all is fine via 'cat /process/mdstat' but I wouldn't know where to look or what to look for if there were syncing issues. The other possibility is that I have iTunes set to keep my music folder organized for me, but I've never heard of it actually corrupting the files it shuffles around. The bottom line is that my library is getting crappier as time goes on and I cannot stand for that!
I have a rather interesting issue. I have set up a home network and a fedora 14 box as a server. I am running the version of Sendmail that came with fedora 14. I wrote a PHP script that changes http access passwords(to give authorized access to the outside by multiple users) once a week and emails the users their new passwords. It also finds out my WAN IP (because it is dynamic, and I am using a Linksys router with NAT), and E-Mails users when this has changed along with the new access password. I have Sendmail set up so that it should log on to my websites mail server (smtp.example.net) and send the email through it.
The problem I am having is that I have set up my home server with an internal domain like exampledomain.home, but the wan IP reverse lookup returns xx.xxx.xxx.xxx.static.xxx.xx.charter.com, so that when my sendmail server connects to my smtp server for my website it gives "EHLO server.exampledomain.home" then my smtp server rejects it because the connecting IP (WAN IP) resolves toxxx.xxx.xxx.xxx.static.opls.la.charter.com gives a host not found error. Or it gives the error because server.exampledomain.home is obviously not a valid host name on the internet. I was hoping someone out there had some insight on how I could get around this without editing or adding any DNS entries to my websites domain. I would also like to avoid getting a static IP for my house as it is more expensive. I thought about making a dynamic DNS entry with dyndns.com and then making Sendmail use that host name. I dont know how to trick sendmail like that though.Here is a copy of my sendmail.mc (scrubbed of course).
divert(-1)dnl
dnl #
dnl # This is the sendmail macro config file for m4. If you make changes to
[code].....
I have been trying to get a home server to do what i want but just not getting there.I only need it to serve up the files to a home ( non internet ) network.I saw that filezilla also comes in a Linux version also. I am going to give it a try next. Anyone use the linux version of filezilla ? What happened did it work not work ?
View 3 Replies View RelatedI am replacing a home network - Windows Server 2003 and 5 PCs (XP Pro) with UBUNTU 10.4 LTS Server and client versions. I am keeping a couple of the PCs with dual boot until I can migrate everything over (Having some issues with iTunes, Family Tree Maker, Media serving, DVD decrypt and a couple of others, but that is for another post). It was great fun getting the server up and running using only shell commands. Took me ages just to get a folder shared! Migrating the data over from NTFS to ext3 was also fun given the limited space on the partitions.
I really only want to use the server for communal network type things ... central user account maintenance, shared folders for music, video etc and data backup. I don't need it to be performing server functions on the Internet e.g. web server etc although that may come later. How I set up central user management? All the PCs are currently setup with local user ids, and it is a bit of a pain to go round each PC every time I change something.
The server is not always up, so I need to be able to log into the local PC without it being active. I was using Active Directory on Server 2003, but I don't need anything that complex really ... just 3 or 4 users to manage. I have been looking at the setup tutorial at [URL] but am not sure how relevant a lot of it is. I have SSH setup so I can login remotely, NFS is working to share the folders, but that is about all I have done so far.
I would like my Ubuntu server to show up as a drive on my XP home machine. I have loaded samba on to the server but I can only get it to show as the printer and faxes under my work group. Also is there a way to have my Ubuntu laptop to auto mount the server when I am on my home network?
View 6 Replies View RelatedLinux and have a western digital server (my book world edition) I can access it with Ubuntu 11.04, just by downloading Samba and then by clicking on network and the server shows up, but with Fedora 15, after I have installed Samba, I click on network and all that shows up is my router?
View 1 Replies View RelatedI'm attempting to run a DHCP server on my home network to enable PXE booting for ethernet clients, but I'm having quite a few issues getting it all up and running. I'm not entirely sure what is wrong, but I keep encountering errors in syslog as follows:
Code:
Feb 27 02:26:46 servnerr-1 dhcpd: Wrote 0 leases to leases file.
Feb 27 02:26:46 servnerr-1 dhcpd:
Feb 27 02:26:46 servnerr-1 dhcpd: No subnet declaration for eth0 (192.168.1.3).
[code]....
Networking is not exactly my strong suit, but I would like to get this up and running if at all possible.
I need to specify a different path to home directories on a particular server than what LDAP contains for the users, besides using a symlink. E.g. "/Users/jdoe" vs "/home/jdoe" I don't want to change the actual LDAP attributes, just want a particular server to point them in the right direction (Ubuntu 10.04).
I'm assuming it's something I could probably set in pam configurations?
I was playing with some gtk2 themes and , unaware of the consequences, i manually changed folder icons from folder properties for some of the folders (desktop, document, music, etc) in my home directory. The problem now is that these folder icons do not change when i change the icon theme. how can i bring it back to normal?
View 1 Replies View RelatedI am running fedora 14,
have 456.2 MB RAM
59.9 GB disk space
Kernel 2.6.35.13-91.fc14.i686
Intel Pentium 4 CPU 2.00Ghz
SIS motherboard
Unknown brand sound card
Have tried tried the following music apps
-Amarok
-Audacity
-Banshee
-Rhythymbox
-Kaffiene
-Movie Player
Have played
-mp3
-m4a
-wav
Used several diff speakers and heaphones
What is the problem?
I'm using OpenSuse 11.2 64 bits When I try to listen to music in Grooveshark Grooveshark - Listen to Free Music Online - Internet Radio - Free MP3 Streaming I can listen fine, and it seems to work ok, when suddenly the sound of the website stops to work, my processor gets overload and I've to reopen the site to continue to listen. I get the following message in kernel (I'm no sure if it's related)
[ 3402.591674] ide-cd driver 5.00
[ 3402.622010] ide-gd driver 1.18
[ 3402.691580] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 3404.308048] end_request: I/O error, dev fd0, sector 0
Some Hardware Info:
[Code]...
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
What server distro can you use to get music?
View 1 Replies View RelatedI have 64-bit ubuntu 9.10 server edition running in a media server for my house. But over the last few months I've discovered that its loosing files! Its not all files, Just music. It will lose anywhere from about half an album the every song in the folder, leaving the artwork if it was in there. At first i thought It was iTunes reorganizing my files, but thats not the case, as i've looked around for them, and told iTunes pretty much to stop messing with my file locations. My boss who's pretty Linux savvy says that 9.10 is really buggy. I've tried doing updates (sudo apt-get update/upgrade) but its still losing music.
View 9 Replies View RelatedI have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View RelatedCurrently my office use a Cisco Firewall which will only allow the ANYCONNECT utility to do the vpn connection. I found a Linux utility (OpenConnect) which will do the same thing, but allow me more flexibility with my networking needs.What I ultimately would like to have is to have a switch that I can connect any network device into it and be connected to the office. IE (my IP Work Phone and Computer) Currently I have is a computer with fedora 13 and two network cards eth0 (home network - connected to a router) and eth1 which I would like to connect a switch to. OpenConnect communicates fine and I can see the work network from the Fedora machine. It creates a vpn0 tun/tap device and I don't know how to pass communication to/from the eth1 device.
Do I try to iptables the ports for the phone and services I need on the computer? Or do I build bridge; and If I do what am I bridging. I have tried making a bridge from eth1 to vpn0 which reply's with unsupported device or something like that.Unfortunately my network skills are bit limited and my office says "it can't be done". Their solution is for me to buy a ASA5505 (or something device) and have a static IP. I would have to make it work as my router and even then it will only DHCP 10 ip addresses; which will cause a shortage of IP addresses in the house.
I am wondering if it is possible to listen to music from a Windows Computer over the network, using ubuntu?
View 2 Replies View RelatedRecently our houses internet usage has skyrocketed and i'm trying to keep an eye on it using bandwidthd (installed on the server). It installed fine and counts traffic fine, the problem is we have a server that hosts our music/movies/etc and when people pull music off the server it skews their bandwidth usage. I'm looking for a way to exclude all traffic on the local network and only count internet traffic. This is the filtering part of the config file
[Code]...
Does Ubuntu Server 10.04 give me a good/easy way to upload music, photos, and videos and automatically have them available to a TiVo, a PlayStation 3, and Macs/PCs running iTunes on the network?I'd additionally like it to be able to transcode the videos into formats that the PS3 can handle.
View 3 Replies View RelatedFirst let me preface this with saying that I have been googling, and trolling boards trying to find a solution, tutorials, any thing to help me what I am trying to do, all day (since 8 am, when I started work, till now 3:50 pm) and I have found little to improve my situation.My goal is to setup my desktop (running Fedora core 12) as a server that can be accessed from anywhere. I would like to be able to have streaming music (find a song, or an album, you want to listen to, click and play) from any location, any computer, and I would also like to store files and such that I could also share with whomever I give permission. I have found plenty of tutorials helping with Apache and SSH, so anything along those lines would be nice.
View 14 Replies View RelatedI have network drive which connected to my wireless router via usual LAN cable. I mount this network drive using Samba to my Kubuntu laptop filesystem. When I play music (MP3, Flac) from that drive, it sometimes hiccups - music stops for few seconds and then resumes. I usually use VLC, but MPlayer and Audacious have same results. I tried to increase buffer in my VLC -> ALSA settings. I increased it from default 300 to 5000ms, still same result. I have very similar issue on same laptop when booted to WinXP. The only player which does not have hiccups in XP is KMPlayer. But it does not want to work in Kubuntu at all.
View 3 Replies View RelatedI have no sound after upgrading to 11.04. Sound control panel and test speakers emits no sound. The new music player won't play sounds from music CDs either.
ALSA info is at: [url]
I use mt-daapd music server to stream music to a couple of network music players (which use UPnP protocols). Recently (last month or so) I have found that on restarting my ubuntu system I need to manually restart the avahi-daemon in order for the music players to be able to 'see' the music server. I think avahi-damon is running when ubuntu first starts up. The output of a ps aux shows:
[Code]...
I'd like to understand why I need to restart the avahi-daemon and either solve this or learn a way to automate restarting it on system boot up so I don't have to do it manually each time. My system is ubuntu 9.10 64 bit and the version of avahi-daemon is 0.6.25
1-When entering a music CD, video or files, any programs or music or video players and desktop are closed are removed all the icons and I can not open any program only on firefox, I can not see the files or anything . (NOTE CD-rom is in mint condition)
2-I graphics effects ruin the entire desktop and when it is in fact no graphic still looks bad everything looks pixelated or striped like when flex is damaged or something is damaged and is in perfect condition.
Now I'm going with the version 10.04 of ubuntu:
1-I have the same problem with the CD I had in 9.10, except that in the 10/04 I can open some programs with the Emphaty and monitor systems.
2-When you close the laptop when I open the screen looks as if the flex embers damaged or broken screen (when it is of course) and I have no other to reset it.
3-When you drive about 30 minutes using computed with any open programs (Firefox, Emphaty, emesene, movie player, Gnome player) to close it or minimize it gets super slow and sometimes if I Friza and then to turn it off and repeat history.
4-When I'm watching a movie or a video with movie player is super slow (just what I'm playing does not the OS) as if Lageado and stuff. But with Gnome looks pretty good player just the video looks very small and I can not put it full screen. Certainly in a Dell Latitude C610 Pentium III-Processor: 1000/700mhz-Memory: 512MB Graphics-Card: 16mb.
I recently got an iPod touch 2nd gen. I plugged it in and it immediately showed up in Rhythmbox. I dragged and dropped music files to the iPod icon listed under devices on the left hand pane. The files ARE on the iPod, I can confirm by finding them on the device in Nautilus. The problem is, they do not show up in the music library on the actual iPod. Did I miss something, or is there a step I must take to get them to show up in the iPod's music library so I can play them?
View 3 Replies View RelatedI've had an awkward problem lately: every music player I use wants to instead of play music from my USB external hard drive, stream music from it. I have no idea why it suddenly started doing that. It may have been an accidental key-combo I pressed, thinking I had another window targeted and didn't bother pressing it again for my Totem music player. So I closed out of Totem in hopes that Rythmbox would work like totem used to. Well, it doesn't. It wants to stream music now.The problem with the streaming music is trivial, but here it is: I have a playlist with a little over 300 songs. I have Totem set to shuffle and repeat my music. Streaming music with it makes it just stop randomly after a few songs, and when I try to pause music and play it later it takes a good 30 seconds before it kicks back in at the beginning of the song.Like I always ask because I don't know enough to give back to the community yet, can anyone help me? Thanks.
View 2 Replies View RelatedFor a long time, I've been downloading music from the Amazon MP3 Store (using Windows). I had hoped the Ubuntu One Store would allow me to use Ubuntu for downloading instead of booting into Windows. To date I've only bought and downloaded one album using the Ubuntu Store. Two reasons, namely that the albums are cheaper in the Amazon Store (at least the ones I've bought have been cheaper) and the files are hidden after download from the Ubuntu One Store.
I was reading last night that Banshee will be the new default music player in Ubuntu 11.04, so, I downloaded and installed Banshee which I discovered has the option to let me download from the Amazon Store (something I've not managed to do yet in Ubuntu). So I gave it a try and it downloaded an album successfully. As an added bonus, the music was downloaded to my Music folder and wasn't downloaded to a hidden folder anywhere. So now I have access to the Amazon Store (cheaper) and the files are not hidden (much easier to make a cd or move to another device for backup).
As of now, I'm exclusively using Banshee because of the reasons I've given above and I can see no sense in using the Ubuntu One Store as it stands. Will Banshee actually be the default music player in 11.04? If so, will it retain the ability to go to the Amazon MP3 Store? If so, will that then be the default for downloading music? If so, what will become of the current default and any music that's already been downloaded from there?