Ubuntu Servers :: Whenever I Connect Using Ftp Client To Server From Outside, To Do A "massive" File Operation?
Jan 14, 2010
I have installed lamp server on a computer i have for website development. i use the latest ubuntu server 9.10, apache, php, mySql, Webmin - all the latest versions. it has been running very smoothly for a while now, accessing both from internal network as well as from outside.my problem is very strange - whenever i connect using ftp client to my server from outside, to do a "massive" file operation like uploading a big number of files or deleting an entire directory, my computer/server "crashes" and i lose connection to it for a few minutes. i cannot access it via ftp, not ssh, and neither of the website installed on it run (http). i just have to wait about 10 minutes for the server to come back again.Like i said - it only happen when accessed from the outside (internet). if i do the same operation from a local computer (the same network) no problem there.
View 9 Replies
ADVERTISEMENT
Nov 19, 2010
I followed this tutorial:
http://www.howtoforge.com/virtual-us...l-ubuntu-10.04
Minus the Quota for the mailboxes, since I don't really care about that. But I don't think that should cause any problems in the configuration.
The server is in my local network.
I tried to connect with Thunderbird and Kmail. Kmal brings up an error message eventually, saying something about a time-out.
Squirrelmail says code...
I searched everything & everywhere only to see that more people have that same error message come up with Squirrelmail. From my understanding some have fixed the issue but I couldn't actually find a solution to this.
Does anyone know how to fix this?
View 1 Replies
View Related
Jun 29, 2010
I would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies
View Related
May 26, 2011
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies
View Related
May 6, 2010
I get this error ALL THE TIME after a reboot if I try to print. Going to the printing applet to add the printer does no good because Lucid is not connected to the CUPS server. I found that the work-around below fixes the issue for the current session.
Code:
sudo aa-complain cupsd
sudo /etc/init.d/cups restart
[code]....
View 9 Replies
View Related
Jan 23, 2011
I have an ubuntu fileserver and an ubuntu laptop both running 10.10.For some reason I can't connect to the server (file or remote terminal) from the laptop, even though I can access ssh through terminal on my mac and have been able to mount the filesystem on another computer running the ubuntu liveCD. I just get the error 'no route to host'.I've tried turning off the firewall on the laptop and re-installing ssh on both computers, but I don't have a clue what to do next!
View 9 Replies
View Related
Mar 12, 2010
I'm trying to set up a private irc server. I install ircd-ircu, modify the configuration file, restart the daemon, and everything works great. After the next server reboot, the server shows the daemon is running, but I can no longer connect to the server from my irc client. I've tried restarting the daemon with no luck. I can then uninstall and reinstall it with the same outcome. Everything works initially, but after rebooting, the irc client can't connect..
View 1 Replies
View Related
Jan 23, 2011
This is my first attempt at a server, and I running Ubuntu 10.04 server. I had to reconfigure my network, so now I am attempting to use it as a server. I have a Linksys WRT54G2 connecting various machines-- Windows XP, Ubuntu builds, and LinuxMint 10 Julia.
The long and the short of it is that the server connects to the Internet-- I can get updates and install programs via terminal. The server also connects to the router, as tested by pings. The client computers all ping back and forth nicely, and I can access the file share via FTP from the local side and externally (this is part of a larger network).
How can I get it so that my client computers can access the Internet through the router and server?
View 3 Replies
View Related
May 10, 2010
i found this video, and i really want to do the same. *newbie needs to learn [URL]...my question is, what need to be installed and how?
is there any specific configuration to make it works?
and will it work if i want to connect from Ubuntu to Fedora ?
View 1 Replies
View Related
Oct 13, 2009
I bought VPS Linux server, but i would like remote desktop thought NX Client. Firstly I installed on server ubuntu like this:
Code:
gpg --keyserver keyserver.ubuntu.com --recv-keys 493B3065 && gpg --export -a 493B3065 | sudo apt-key add -
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install kubuntu-desktop
Then I proceed as described in this tutorial:
Code:
[URL] but it's not work when I try loging to the server via NX Client. Then I try this tutorial:
Code:
[URL] but I don't receive public key (when I put this code sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2a8e3034d018a4ce) .
View 1 Replies
View Related
Oct 10, 2010
I got the following message when starting the Jack Control.
Could not connect to JACK server as client.
- Overall operation failed.
- Unable to connect to server.
Please check the messages window for more info
15:25:37.902 Patchbay deactivated.
15:25:37.903 Statistics reset.
15:25:38.020 ALSA connection graph change.
15:25:38.216 ALSA connection change.
15:25:39.777 Startup script...
15:25:39.779 artsshell -q terminate
sh: artsshell: not found
15:25:40.182 Startup script terminated with exit status=32512.
15:25:40.183 JACK is starting...
15:25:40.183 /usr/bin/jackd -R -dalsa -dhw:0 -r44100 -p1024 -n2
15:25:40.190 JACK was started with PID=2052.
no message buffer overruns
jackd 0.116.1
View 3 Replies
View Related
Feb 1, 2010
I'm trying to install postgresql 8.3 on Ubuntu 8.04 LTS server and I'm running into problems starting it. Commands I've done # apt-get install postgresql postgresql-common Things I've tried Starting it manually
# /etc/init.d/postgrsql-8.3 start
Nothing appears in my /var/run/postgresql When I try and start psql as the postgres user I get the following error psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? I've been following the docs at: https://help.ubuntu.com/community/PostgreSQL
View 2 Replies
View Related
Feb 3, 2011
I am running CentOS release 5.5 (Final) with PROFTP installed.
I am able to connect to the ftp server from local, but when I try it from dream weaver CS5 it can't connect to the server. I ran a port scan and 21 seems to be open:
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
53/tcp open domain
[Code]....
View 2 Replies
View Related
Mar 20, 2010
I have reinstall my server. I think everything was okey. But i can not connect my server with NX Client.
View 3 Replies
View Related
May 22, 2011
until 2 weeks ago I had o.S11.3 on both my Siemens and Asus laptops. I have installed NX No Machine. ( I know it's not open source,I am using the free version). With commandline ( root) /usr/NX/bin/nxclient I was able to connect to the other machines. I got Qt: Locales not supported on X server, the NX menu popped up and I was able to connect by inserting resp codes. After fresh install of o.S.11.4 on the ASUS the commandline (root) answers:
xlib: connection to":0.0" refused by server
xlib: No protocol specified
nxclient: cannot connect to X server:0.0
The ASUS can still be reached from the other machines (one with o.S.11.3,the third one with o.S.11.2 ) SSH ( Lan)connections are all working forth and back between the machines, even to and from Win XP, however only from Win 7 on the ASUS, but that's a Win7problem. Comparing the installed xorg-x11- server-extra : on o.S. 11.3 Additional X servers ( Xmdx,Xephir,Xnest,Xvfb ) ,on o.S.11.4 the Xvfb is missing, might that be the reason?
View 1 Replies
View Related
Feb 16, 2009
in my office all users connect to internet via VPN.in our office there is one special server that we want when users connected via VPN,users can not connect to the special server and when users are not connect to via VPN can connect to that server.
View 3 Replies
View Related
Mar 25, 2010
I am getting this error when i try to connect a client to a server in windwos ,anybody knows why ?
View 3 Replies
View Related
Jan 5, 2010
More for my own posterity than anything else, I thought I'd document here the way to get to eDesktop through linux (debian, ubuntu) at the University of West Florida (UWF), since they appear to only support Windows through their documentation on the University web site, and the link through Argus (the secure web site) doesn't work in Linux. This is sometimes needed to use the University resources (libraries and computer programs) from remote locations, and otherwise a google search is fruitless. I had to have a guy in the computer science department show me how to do it.This may apply for other Universities with similar setups.
View 1 Replies
View Related
Apr 26, 2010
What client can I use on a MAC to connect to an openvpn server?
All the client s seem to use password connections whereas the openvpn server uses certificates.
View 3 Replies
View Related
Jan 28, 2010
So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.
View 2 Replies
View Related
Dec 2, 2009
I have Samba PDC server on CentOS 5..we have 10 thin clients in our network which were working fine previously with the windows Terminal services... Now i have replaced my windows 2003 Domain to Samba Domain Controller.. Is there any why i can connect our thin clients with SAMBA DC in the our environment?
View 2 Replies
View Related
Sep 28, 2010
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
View 20 Replies
View Related
May 29, 2015
I have been using Wheezy for two years, and everything was OK, so I decided to upgrade to Jessie. In fact i decided to perform a clean install of jessie, so I formatted the partition where Wheezy was installed, and the /boot partition, and I installed jessie in those partitions.
As I had done with Wheezy, I installed jessie in an encrypted LVM, and the installation was ok (well, almost everything was OK, because grub and plymouth were not working, but I will open another topic about it).
First thing I did after installing Jessie was editting sources.list in order to download a few programs (plymouth, firmware linux non free, libdvdcss2, gufw, menulibre). Moreover, I downloaded a few progrmas from the Debian install DVD (flashplugin, VLC, chromium, clamav). i did not perform a dist upgrade because i was not at home, and where I was I did not have a Wifi connection (so I was using my mobile connecion -USB ethernet with an android phone-. BTW I had just performed a hard reset I had not installed any apps after that, so that mobile phone was "clean").
After that, I created a desktop user account, and I rebooted the laptop . When i rebooted, I started to tweak my user account: I edited dconf, and the gnome shell theme; and I started my mobile connection to download three extensions for gnome shell (window list, simple dock and activities configurator. I had used those extensions with Wheezy, and I had never had any problems). Ten minutes after I started the mentioned mobile connection, I reveived a SMS as I had used over 300 MB. Gnome monitor showed that I have downloaded 300 MB, and the android native data usage app showed the same. I did not download any video or music neither watch any videos on youtube, dailymotion..., I did not visit any suspicious web
I had a look at the apt logs and I din not find anything significant (I was using a no sudo user account, so i was not able to perform a dist.upgrade), I had a look at the download, video, music, picture folders and i din not find anything. I tried to check the iceweasel cache folder, but there were so many subfolders I could not check everything.
View 4 Replies
View Related
May 2, 2010
I am trying (desperately) to setup freeNX so that I can access my Mandriva box from my Macbook over my network. I have great need to be able to do this. Here's the necessary info for you: Mandriva PC: running Mandriva 2010.0 with freeNX installed from the Mandriva repos Macbook: running OS 10.4 with the Nomachine NX Client installed Now, I have followed the setup from the Mandriva wiki as well as the freenx wiki to no avail. I simply cannot connect the Macbook's NX client to the server. I get an authentication failed message. However, I can ssh from the Macbook to the server just fine (that's how I'm getting most of this work done).
[Code]...
View 3 Replies
View Related
Feb 24, 2010
I am not exactly newbie with GNU/Linux, but definitely new to SSH/NX stuffs. I followed the below tutorials for installing FreeNX so that I can access my desktop like TeamViewer in windows.
https:[url]....
https:[url].....
But I don't see the folder NX like the one mentioned here.Then edit the file /usr/NX/etc/server.cfg
I don't see a folder called NX to proceed. Also when I use nomachine client to connect from Windows, it couldn't connect and I get the below errors.
nxssh: <host-name>: no address associated with name.
how to make connect to freenx server from windows using nomachine client?
View 1 Replies
View Related
Nov 16, 2010
In case that NFS client of fedora is set to cache nfs file handle, where is the cache stored such as /var/lib/nfs?If it's stored in memory instead of directory tree, what command can I know the combination of file names and file handles with?OS in my test environment: Fedora Core 6
View 2 Replies
View Related
Feb 17, 2010
I have a program that is very heavily hitting the file system, reading and writing randomly to a set of working files. The files total several gigabytes in size, but I can spare the RAM to keep them all mostly in memory. The machines this program runs on are typically Ubuntu Linux boxes.
Is there a way to configure the file system to have a very very large cache, and even to cache writes so they hit the disk later? I understand the issues with power loss or such, and am prepared to accept that. Crashing aside, in normal operation the writes should eventually reach the disk!Or is there a way to create a RAM disk that writes-through to real disk?
View 5 Replies
View Related
Sep 28, 2010
I am looking for a client/server application that can allow me to have remote GUI access (eg: VNC) but with the ability to use sound.
I see that TeamViewer has a linux application out now but for my company, it would compromise security protocol because it reaches out to the TeamViewer servers to do any work.
Basically, we have applications that require a GUI and we need to hear sounds from them if they throw an alert (the app is a monitoring tool).
We are running a VNC server on it currently and when our monitoring machine was on Windows, TightVNC was able to get the sound...that is not the case with any Linux client so I am wondering if there is actually one that exists.
View 3 Replies
View Related
Nov 19, 2008
OS:
Red Hat ES 5.2
Kernel:
2.6.18-92.1.18.el5
Samba version:
[root@intranet samba]# rpm -qa |grep samba
system-config-samba-1.2.39-1.el5
samba-common-3.0.28-1.el5_2.1
samba-client-3.0.28-1.el5_2.1
samba-3.0.28-1.el5_2.1
When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.
Below is the entry in /var/log/samba/samba.log
[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003)
'/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied
Here is my smb.conf file:
[global]
# Server name
server string = Intranet Server (Primary)
# These are the default password settings.
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# Define NT domain/workgroup name.
workgroup = intranet
# Security mode. (See SAMBA documentation for details.)
; security = user
# Restrict conections to specific IP addresses.
hosts allow = all
# The %m variable sets a separate log file for each
# connecting machine.
# log file = /var/log/samba-log.%m
# Keep it basic - one file!
log file = /var/log/samba/samba.log
# The number of minutes inactivity before a connection is
# disconnected. (This disconnection should be transparent to most
# clients, which an have auto-reconnect feature. Removing inactive
# connections is to preserve the server's resources.)
deadtime = 10
# These socket options are suggested in the default smb.conf file.
# Who am I to disagree?
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Define both Ethernet interfaces. (Otherwise, I suspect only one
# will be configured??)
interfaces = eth0 eth1
username map = /etc/samba/smbusers
; guest ok = no
; guest account = nobody
[server2]
comment = server2
path = /server2/test
write list = @intranet
force create mode = 775
force directory mode = 2775
writeable = yes
; browseable = yes
valid users = intranet
/server2 and /server2/test are owned by user intranet and both directories have permissions set to 777.
Has anyone come across this problem in the past?
View 3 Replies
View Related
Sep 15, 2009
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
View 1 Replies
View Related
