Ubuntu Servers :: Set Up 11.04 Install So That Php Access Ms-sql?
Jul 17, 2011
I am trying to set up my 11.04 ubuntu install so that php can access ms-sql servers. I have done this twice before once with ver 9.10 and centos 5. So I figure I would follow the same steps again as I did last time. but its not working this time around. I get to building php and get the following error. I do not often build packages as I dont know much about it so I figure I have missed something some place. Can anyone tell me what this means and a clue to where I can find the fix.
>> dpkg-buildpackage
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor):
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions
dpkg-buildpackage: source package php5
[Code]...
View 1 Replies
ADVERTISEMENT
Oct 5, 2010
I am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
View 1 Replies
View Related
Aug 5, 2011
Is there any way to install a Ubuntu server and access the server remotely via a Ubuntu desktop environment instead of a SSH command line?
I will be installing a Ubuntu server in an office where the office manager will need to be able to do simple things like add/remove users, access filesystems, etc. She can handle these tasks in Ubuntu desktop/GUI, but it is impractical for her to have to learn how to use the CLI terminal to do this stuff.
Will I have to install desktop Ubuntu on the server to do this, or can I install Ubuntu server version and setup another computer Ubuntu desktop to remotely login graphically?
View 1 Replies
View Related
Sep 28, 2009
I was trying to install MySQLbd (a module for python to connect and access MySQL) I followed these steps for installation[URL].. but while I am getting some installation errors. When I try to run $ python set.py build I am getting the following errors (I removed few errors as I can post more than 10000 characters here)
[Code]...
View 3 Replies
View Related
Mar 26, 2010
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
View 4 Replies
View Related
May 10, 2010
i found this video, and i really want to do the same. *newbie needs to learn [URL]...my question is, what need to be installed and how?
is there any specific configuration to make it works?
and will it work if i want to connect from Ubuntu to Fedora ?
View 1 Replies
View Related
Jan 30, 2010
I installed 6.06 LTS on Virtual box and I cannot access the netPlease let me know what I must look for.I am new to linux as well
View 2 Replies
View Related
May 28, 2010
I am having an issue on my server where I can't access certain ip's erratically. These addresses could previously connect to us.I think it may be related to getting rootkitted. I know the risks in not reinstalling but we are not able to install yet at this point. I cleaned out shv4 and shv5 from the os and setup tripwire. The client can't ping the server and likewise back.From my personal computer they both respond to pings.The server is running denyhosts but that is about it in-terms of security.I can't find anyhting anywhere... No ipchains present, nothing in host.deny, subnet is 255.255.255.0.I'm really at a loss so I'm looking for some direction
I know someone is going to tell me that I have to assume all my files are compromised and i should reinstall; I did md5 checks on alot of files and there is no data on here that shouldnt get out and I check for stuff running that shouldn't be daily.The server is 10.04 server. Latest updates.Here is a list of installed packages
Code:
adduserinstall
anacroninstall
[code]...
View 4 Replies
View Related
Jun 13, 2010
Every time I try to mount a folder from my server, it ignores whatever folder I specify and just mounts the first folder in the exports file.I used to be able to mount more than one nfs folder, so I don't understand what is going on. Google isn't helpful.
View 2 Replies
View Related
Jul 15, 2010
I am a Newbie to Server platform. Just installed Ubuntu 9.04 server, As my Lappy not supporting OEL 4. I was shocked to see that there is no GUI. Anyhow, in that it is showing to Login. I enter the Username and password which was created during Installation on Ubuntu server. It was fine. How to goto Root?
I typed su - root and entered password
Says Authentication failure.
How can I overcome this? While Installation where ever it asks for a password I use the same one.
View 1 Replies
View Related
Sep 1, 2010
just switched our company from windows server to linux and everything is going good except we have 4 vpn connections though out the country coming to our server. All giving the client machines ip addresses of 192.168.x.x based on where they are located 192.168.1.x for the main location 192.168.2.x for a second location etc, and IIS could see the clients ip instead of the wan ip and was setup to block all ips except 192.168.x.x ip's and this worked great.
So i set up apache the same way, to allow only 192.168 ip's but i guess it doesn't work that way in apache for connections coming though vpn? 2 out of our 4 VPN connections are not static IP's, so the 2 that are I just add that ip to the allow list and that worked.But i don't think we should HAVE to get static ips for the other 2, that's one of the benefits of using VPN, especially if our old windows server didnt need it.Is there any way for apache to see the clients ip address for access or is there something somewhere else that needs changed for this?
View 8 Replies
View Related
Sep 4, 2010
I had followed this Guide to get proftpd with mysql on a Ubuntu server edition the last one available to download 10.04.1I did everything. phpmyadmin is working I can access it via the browser and create users and groups.When I am trying to enter my server using the ip or the domain name I am getting an instant error.Flash fxp's error log
Code:
[R] Connecting to 192.168.25.117 -> IP=192.168.25.117 PORT=21 (attempt # 2)
[R] Connected to 192.168.25.117
[code]....
View 4 Replies
View Related
Oct 7, 2010
I'm running Ubuntu Server 10.04 32-bit.I'm looking to find if there is anyway I can lock down ubuntu so that remote access, whether it be SSH, ftp, apache.etc can be only accessed from a certain IP range, or a certain set of IPs?Essentially, we'll say the Server IP is 192.168.1.32, and I want the IP addresses 192.168.1.33-50 to be able to access the server, but no other IPs.I am in a switched environment, router's are not allowed to be placed on the network, and I do not have access to a DNS or DHCP server.Is there a way to do this in on the server via a configuration of some sort?
View 3 Replies
View Related
Jan 10, 2011
I've got VPN setup and working on my server. I can VPN into the server and access my local network from anywhere. It uses pptpd for it. My problem is that I can't access the internet once I'm connected to my VPN. Is it possible to allow internet access through VPN?I mainly would just like to be able to connect, access my local network, and still browse the internet. Is there anything specific I need to change?
View 6 Replies
View Related
Apr 3, 2011
I installed vsftp on ubuntu10.04.2 32-bit server. I can access ftp remotely by using ftp client tool -- Filezilla, but can't access ftp site from web browsers (tried on both IE8 & Firefox). when type ftp://xxx.xxxx.xxx, the browser has no response.
View 2 Replies
View Related
Apr 25, 2011
I'm working to set up my first server to experiment hosting my own web pages. I have installed Ubuntu 10.04 server. my web only can access by typing www.xxxxxx.com, if we not typing www (xxxxxx.com), it will not responding.
how to access my web without type www, ?
View 9 Replies
View Related
Jan 16, 2010
I have an Ubuntu 9.10 server and I recently noticed that when it starts up I see the following displayed
* Starting init crypto disks..
* Could not access PID file for nmbd
I don't know where the message "Could not access PID file for nmbd" it doesn't appear to be coming from samba because samba is starting later in the startup. I've had no issues with samba and I can restart samba with no issues. Is this something to be concerned about? I noticed it started after I upgraded my samba server.
View 9 Replies
View Related
Feb 5, 2010
I set up mod_proxy in order to get rid of :8080 now I cant access phpmyadmin through the browser. what is the quickest way to turn off mod_proxy and access phpmyadmin? I would like to optimize the tables and back up the sql file. I just need to turn it on for a bit, and then enable mod_proxy again.Right now, if I got to localhost/phpmyadmin, it redirects to the main application.
I have used a2enmod, and added
sudo a2enmod proxy
sudo a2enmod proxy_http
sudo a2enmod proxy_ajp
[Code]...
View 2 Replies
View Related
Feb 12, 2010
Apache by defaults points to /var/www/eachdomain. I need to be able to give users ftp access to /var/www/specific domains.
It seems that if I change the owner of /var/www/specificdomains/ to the user in question, then www:data no longer owns the directory and Apache starts to have issues..
What's the best way to set this such that I can allow users to FTP into specific directories, and still have www:data own them? I'm currently using vsftp, but that can easily change.
View 6 Replies
View Related
Mar 6, 2010
I am running an apache server thru webmin, on a 8.04 install. Attempting to install awstats I have realized that access.log stopped writing some months ago. Went back thru the error logs and found I had deleted the virtual server, and started a new one. Everything else works fine, it never even occurred to me that logging would not also be restarted. I would just like to get it going again, any clues???
View 5 Replies
View Related
Apr 12, 2010
I will mount a nfs share on a client with fstab. Is there a way to don't allow some users accessto that folder ?
View 4 Replies
View Related
May 24, 2010
On my Ubuntu 10.04 lucid lynx server edition machine I have an Apache http server listening on port 80 and today I installed the Funambol server which added an Apache Tomcat server listening on port 8080. From within my lan I can reach both servers, but from outside the lan I can only reach the http server on port 80 and not the Funambol server on port 8080. I get a time out message instead.
In my router I have setup port forwarding, such that both ports 80 and 8080 get forwarded to my server machine. Must Tomcat be told to listen to external requests? Is my server listening on port 8080 only for requests inside the lan? Or is there some authorization that fails when I try to visit from outside my lan?
Here is some netstat output, I don't know if the differences between the 80 line and the 8080 line are relevant:
Code:
remon@compaq:~$ sudo netstat -nlp | grep 80
tcp 0 0 0.0.0.0:8009 0.0.0.0:* LISTEN 1778/java
[Code]....
View 9 Replies
View Related
Jul 9, 2010
Setup an Ubuntu LAMP server to house a Wordpress site. Everything is gravy but I am having some troubles getting emails to route outside my local network. I have setup Internet and also added my ISP SMTP as a smarthost - either way I get the dreaded Relay Access Denied 5.7.1.
I am using DynDns as I do not have a static IP - not sure if this makes a difference?
telnet my_dyn_dns.org 25
ehlo localhost
250-my_dyn_dns.org
250-PIPELINING
250-SIZE 10240000
[Code]....
I have also tried the above with my ISP smtp IP in relayhost - same error.
View 2 Replies
View Related
Jul 15, 2010
When you access mysql within the same Apache server (same ip address) via php, do you need to GRANT user ip in order to login to mysql?
Where are the log files for php, mysql etc?
View 4 Replies
View Related
Aug 26, 2010
I have ubuntu server 10.04 installed with wired internet access through my router. I recently installed the ubuntu-desktop packages and cannot get internet through the gui, firefox never gets past the "looking up" stage.I can accessthe internet through the command line and through webmin httptunnel. Wget, apt-get install, apt-get update, apt-get upgrade all work fine from the command line. I have local access to the GUi as well in the form of VNC that is working fine.
View 2 Replies
View Related
Sep 15, 2010
I've setup a webserver with LAMP and wondered if it was possible to edit the files without having to login through FTP, as would be the case if I was editing on an IIS server?
View 2 Replies
View Related
Sep 30, 2010
I got two web apps in my single linux box, they are Wiki and Mantis the screenshot of the web apps directory shown below.I have created the DNS CNAME record for this server which point to the main server SV6.somehow i got error after i edit it and restart the Apache server.
View 2 Replies
View Related
Oct 2, 2010
I am having this problem, that says in the boot up ~Could not access PID file for nmbd~/ I have been told to delete splash file. But i don`t know how to do so.
View 3 Replies
View Related
Oct 8, 2010
I have ubuntu 10.04 running LAMP and proftpd, I can access over LAN but not when I type my domain name in. I have forwarded all necessary port to to the local ip of that box, added rules to ufw to allow traffic on those specific ports. I use dyndns for a second level domain and have used all their tools to check whether the ports are open and have the results I am looking for.
View 7 Replies
View Related
Dec 11, 2010
I'm running an Ubuntu 9.04 Minimal server and trying to get MySQL to work correctly. But when I try to access MySQL with the root user it doesn't want to.
Code:
mysql -u root -p
Enter password:
[code]....
View 4 Replies
View Related
