I've setup a webserver with LAMP and wondered if it was possible to edit the files without having to login through FTP, as would be the case if I was editing on an IIS server?
View 2 RepliesI've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)
With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
I'm new to Linux and have taken over at a company where the linux admin walked out. he has several older linux based servers running version 8.1 i tried running the command sudo apt-get install swat xinetd to setup swat but i get an error that it can't find the package. in addition, this directory xinetd is no where to be found under the etc directory. i've verified that samba is in fact installed on these servers but for some reason the xinetd and inetd directories are not on these servers.
Could it be possible that this older version of linux does not support Swat? i'm considering upgrading very soon to the latest but my main problem right now is i need to copy all web server html files that he had on the web Server i know there are different ways to copy files from linux systems but need the best way to copy all the files so none of the website links get broke off this linux server over to my windows server.
Since i don't have access to anything of the directories nor files on the web server, what is the best way to copy these files and folders off this server?
I have a server setup with all my web development stuff in /var/www and in several sub-folders within that. (each project having it's own folder)It works great with one FTP account. But recently I've been getting help on a projects from a buddy of mine that freelances, and have made him an FTP user account as well. All is fine, except for when he tries to edit a file and gets a permissions error.
Here's the issue, I don't want us to have the same FTP login, but all the files are currently owned by my user name. So, when he logs in to edit a file, he can't because I'm the owner, and the files are set to 744. Will I cause any harm by adding both users to the same group (www-data) and chmod'ing the files to 775 so that we can both access and modify the files?
1- I've set up 3 virtual users,one of them is a system one (with a different password) and writes on his own home folder. With this one I haven't found any problems yet, but with the other 2 users I can't access files/folders created by them. It's a permissions problem for sure, but I'm not sure how to correct it.With these users I can upload files, create files and create folders. The problem is I can't access what I create (I can't enter a folder I created but it is there and I can upload files into it).
2- Whenever I turn on ssl_enable=YES I can't access the server (even from the server itself when I connect to localhost, It's a regular Ubuntu installation).Here's the config file for the users:
Code:
write_enable=YES
anon_mkdir_write_enable=YES
anon_other_write_enable=YES[code].....
I have installed LAMP server, I cant access any image files though Apache2.
All other, text document are showing, html, and php etc.
I am currently new to all of this and not even sure if I am in the right place.But I am currently running a server with OpenSSH.When you go to my site's homepage, I have a link that redirects you to my files that I will be sharing.They are currently access denied as I do not want the public to be able to download.My question is how would I go about having a login box to pop up when they clink on the link on my homepage to access the files folder.Currently I have accounts set up and it works when going through Filezilla with SFTP but I'm not sure how to give access to use via a web browser
View 1 Replies View Relatedi have a problem, i share my files but nobody can access my file. what can i do?
View 1 Replies View RelatedI've been researching this all day with no luck thus far. Basically I need to cutoff port 21/ftp access from IP addresses outside of my local network. My local IP range is something like 192.168.0.100 - 192.168.0.150 -- so anything outside of this range would automatically be blocked.
Any IP address outside of this range would be denied as I use SFTP for remote access, etc. from home, etc.
I've researched IP tables, tcp wrappers, etc. but am still unsure which would be best for what is probably a simple fix.
Relevant info: Vsftpd via Ubuntu Server 10.10
I have an OpenVPN(10.04.2 LTS) server running in bridge (TAP) mode. Its sitting behind a router and then a cable modem. The VPN works perfectly but I have a security concern. In order to allow the VPN clients to connect to the internet, I had to enable IPv4 forwarding on the server. Is this is a security hole? Can a hacker access my servers connection from the internet (without authenticating with OpenVPN) and access my network. Can someone use Ipv4 forwarding to access my LAN network from the WAN
I used this command to enable ipv4 forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward
Without IPv4 forwarding my VPN clients can only access my LAN and router, but they cannot reach my modem or the internet.
[Code]...
Just installed lamp, I can access phpmyadmin mysql is set up and everything. When I try to view a directory [URL] I get an access denied error.
EDIT: I changed the permissions of the "folder" folder itself, I can access everything in that directory now but not any other folders in it. Do I really need to go through every folder every time and change the permissions?
I've managed to setup Ubuntu Server 9.10, and created folders/files toview/edit/execute with Windows and Mac.
Now here is my dilemma, this is for a home server, and I will have 4 users(1 for myself, one with "admin" rights, my fiance(mac user), media pc, and a "guest" account for the computer or 2 that are out in the public(they don't need access to my taxes ).
I'd like to have it so that on my laptop, I can access the whole server, but some files/folders would even need me to put in a password. I want to do this because my fiance gets delete happy and deletes things, so if she goes on my computer she won't delete important info. I'd like her to have access to music, photos, and videos, as well as her having her own folder that she can treat as her hard drive.
The question is, do I need to setup a domain for this, or can I get away with a workgroup?
It seems I can't access smpt servers both from kmail and php. Kmail says
Code:
Sending failed:
smtp.gmail.com
The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder.The following transport was used: ... I double checked my settings and they are correct. I can ping smtp.gmail.com. I can send emails using thunderbird on a windows box that is connected to the same network as I am.I also tried turning off the firewall through yast but no joy.
I'm after a WebGUI file manager which runs on another port rather than port 80 (already have a Apache installed)
But i want to be able to access and edit files from the web, rather using FTP client etc..
I have a problem configuring my PostGreSQL server for internal network access.
I want to be able to access my postgre server from 192.168.1.10
It works when I set listen_address to *, but if I input 192.168.1.10, or any other IP address, I always get:
Quote:
WARNING: could not create listen socket for "192.168.1.10"
FATAL: could not create any TCP/IP sockets
postgresql.conf section
[Code]....
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
View 3 Replies View RelatedI upgraded from Suse 10.3 to 11.2, since when my Win XP box can't access the Linux files. All was OK before upgrading. The Linux (Suse 11.2) can access the Win files fine using Samba and the workgroup.
View 9 Replies View RelatedIm having trouble setting my SAMBA server correctly. I have two Win machines, one with WIN7 and one with XP. I have one Ubuntu machine and Ubuntu Server 10.04. My problem is that I can only acess files from the Win 7 Machine. When I try to map out the shared dirs on my serverI get asked for user and password, when I enter my creditensials it dosent help.. What to do? I used the sample smb.conf file and open for no restrictions..
[Code]....
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
i work in an office with individual p/c's (all with windows xp) connected to a windows server. i have installed opensuse 11.2 on my work's p/c (as a dual boot) but have no idea what to do so that i can access files on the windows server. can some kind person point me in the right direction.
View 3 Replies View RelatedI just need to be able to to access my Windows PC from openSUSE 11.3. Does anyone know where to start?
View 9 Replies View RelatedI have a multi user system for my roommates and myself that has separate folders for each of us. I've got user authentication working with samba, but unless I set every file and folder readable/writeable by all users, I can't browse it or edit the files.This isn't ideal as the shares are open to other users access, so I'm hoping there's a way to keep folders at 750 and files at 660 while allowing samba users to browse, delete and edit.Also, the samba share is actually a mounted NFS share from another server. Both the NFS server and the Samba server have the same users/uid's. When a file is created from a Windows host via the Samba client, the NFS server's permissions do show that the correct user owns the files, but since the files aren't mode 666 but 640 I can't edit or delete the file.
View 4 Replies View RelatedI'm running SUSE 11.3 on a Dell Inspiron 1501. I'm trying to network it with my Windows 7 and XP boxes. I've installed Samba, activated the services Samba needs and add myself as a Samba user. My problem is that I can see and access files on the laptop from both of my desktops running Windows, but when I try to access them from the laptop I get a message saying the server timed out whenever I try to access my workgroup.
View 8 Replies View RelatedProblems with launching data files of the nas and saving to them is a kde problem. The dot desktop files have to contain access rights for smb/http etc and even when given these it still will not work. I have mainly concentrated on getting the VLC video player to work as it is capable of playing from just about any source, comes with codecs etc etc. Amazing package really.
Pure K apps such as kwrite at least work fine. I tried setting up samba but to no avail.
As dropping a file into VLC's focus didn't do anything I created a vlc desktop icon and dragged the nas file onto that. It plays and a kde error message pops up from plasma shell - can't find file!
I enable kde automount. The content of that when it starts is disturbing. It shows my system disks a detachable and not attached! No need to worry though. I selected mount on log in and attachment where the server was shown. VLC still wouldn't work.
Next I enable NFS file transfers on the NAS. This has allowed me to use open with directly onto an avi file on the nas. I can also click launch them. Remaining problem is opening files on the nas from within VLC. Up pops the kde message "you can only select local files". The file manager here seems to be an instance of dolphin. This suggest that there is going to be a problem saving files to the nas as well. Looks to be the case. VLC can convert formats and all sorts of things. If I select a file locally and try and convert it and save to the nas up pops the "you can only select local files" as soon as I select ok having set the path and file name.
Strange thing is that working transfers seem to be using CIF even though it took an NFS enable to get it partly working via KDE's automount. Dolphin only allows a CIF set up which has a distinct advantage as a direct ip address can be entered. The automount has introduced a very very long delay before kde is up and running following a log in. Samba is even worse in this respect and both seem to lack a method of direct ip input which means they have to find the server.
One other aspect. As far as NFS is concerned from a very recent post elsewhere nautilus works. Pass on CIF. And of course it's all instantaneous and ok on windows even on vista. Enabling the TV protocol on the nas has confused Vista as it only wants to connect like that and needs drivers. Might also be down to having NFS enabled though. MS might not like that.
I have filed all of this on bugzilla if anyone would like to vote - bug number 695648. Seems to me that the CIFs route should be the default for ease with many users on home networks. I'm also sure that the problem is basically KDE preventing aps from accessing the nas.
I have a few ubuntu servers which have samba shares on the network and for the most part have had little trouble with them. Recently we purchased a few iMac's for one of our deptartments and, while we're able to access the shares, all the files on them are read-only and we are unable to delete/modify files using the iMacs. This is not an issue with any of our windows machines (W2K, WinXP, Vista).
View 2 Replies View RelatedI am trying to setup my webserver and I am trying to make a website to run under suexec but somehow I cannot start my apache it directly fails and SELinux is giving me errors and don't really know what to do with it, it is giving me some command to type but not sure if this will make my server less secure. The SELinux error is as follow:
Code:
Summary:
SELinux prevented httpd reading and writing access to http files.
Detailed Description:
SELinux prevented httpd reading and writing access to http files. Ordinarily httpd is allowed full access to all files labeled with http file context. This machine has a tightened security policy with the httpd_unified turned off, this requires explicit labeling of all files. If a file is a cgi script it needs to be labeled with httpd_TYPE_script_exec_t in order to be executed. If it is read-only content, it needs to be labeled httpd_TYPE_content_t, it is writable content. it needs to be labeled httpd_TYPE_script_rw_t or httpd_TYPE_script_ra_t. You can use the chcon command to change these contexts. Please refer to the man page "man httpd_selinux" or FAQ [URL] "TYPE" refers to one of "sys", "user" or "staff" or potentially other script types.
Allowing Access:
Changing the "httpd_unified" boolean to true will allow this access: "setsebool
-P httpd_unified=1"
Fix Command:
setsebool -P httpd_unified=1
I will write down how I did setup my server so maybe you can see a mistake I did. First I changed my Apache httpd.conf I added the following to it:
Code:
NameVirtualHost 192.168.1.2:80
<VirtualHost 192.168.1.2:80>
ServerName localhost
DocumentRoot /var/www/html
DirectoryIndex index.html index.html index.shtml index.php
</VirtualHost>
<VirtualHost 192.168.1.2:80>
SuexecUserGroup ulyaoth ulyaoth
ServerAdmin webmaster@ulyaoth.org
ServerName test.ulyaoth.org
DocumentRoot /var/www/ulyaoth/www/html
ErrorLog /var/www/ulyaoth/logs/error_log
CustomLog /var/www/ulyaoth/logs/access_log common
DirectoryIndex index.html index.htm index.shtml index.php
ScriptAlias /cgi-bin/ /var/www/ulyaoth/www/cgi-bin/
<Directory /var/www/ulyaoth/www/cgi-bin/>
AllowOverride none
Order allow,deny
Allow from all
Options +execCGI
AddHandler cgi-script .cgi .pl
</Directory>
</VirtualHost>
Then I created the username "ulyaoth" with the group "ulyaoth" as I specified with my suexec, then I created all the directories as specified in my httpd.conf and "chown ulyaoth:ulyaoth (dirname)" them to the right group and username.
I dont know were to begin to solve my problem and I have been googling for hours to get a hint without any success. I'm runnning a Counterstrike Server on my virtual openSuse server - I'm exploring so don't justify what I am hosting at the moment
I want to make it possible to gain access to the cstrike folde via a ftp login. But I really have no idea were to start. The server is also a webserver, where I can ass FTP accounts for my apache vhosts via plesk - but I dont think this is the solution of my problem, isn't it?
I have been trying to get a home server to do what i want but just not getting there.I only need it to serve up the files to a home ( non internet ) network.I saw that filezilla also comes in a Linux version also. I am going to give it a try next. Anyone use the linux version of filezilla ? What happened did it work not work ?
View 3 Replies View RelatedPrelude: OpenSUSE 11.2 (2.6.31.8-0.1-desktop), installed Novell client 2.0 SP2 (novell-client-2.0-sp2-sle11-i586.iso).
I found that if any usual user is logged into a NDS-tree, then _local_ root has full access to user's network shares, including the user's home directory located on remote Netware-server. Is it by design or
have I missed something? Nevertheless in windows local admin has no access to network resources mounted of any other user. If you runas shell (as admin) then admin in principle can't "see" network shares which were mounted (connected) by other users - they are accessible ("visible") per session.