Is openbsd (4.9) "server" compatible w/ ubuntu clients? note: have had no problems setting up ubuntu <> ubuntu sever client but having trouble w/ openbsd <> ubuntu client. "pernission denial" messages from openbsd server
View 1 Replieswhat cloud computing is and i think it can help me with some of my clients i want to switch my clients from a normal ubuntu server to a ubuntu cloud. as of right now i have to send out a bill to them and if they dont pay i have to shut down there service till they pay. what i would like to do is to have a cloud where i can sell them based on what they use not a set price like it is now. and have them be able to pay there bill on the cloud and if they miss the bill then the cloud can shut off there service till its payed.
i dont know if this is possible and i have looked everywhere and all i can find is info on other businesses billing and now how to set up a cloud to do this. i wish there was some kind of tutorial for this. if anyone can direct me to some good notes/tutorials that would be very helpful. this could be a big changing point in my business if i can do this. it would save a lot of time and cash.
I am using ssh server to connect to my Ubuntu desktop. I opened the file sshd_config and change my port number of the server.I want to put a limit on the number of clients in the ssh server.
View 2 Replies View RelatedMy server and clients (NFS and NIS) are in continuous attack via ssh. Somebody is trying to guess password and login, and making port 22 busy.What are different ways to stop this attack?I am thinking to block this ip in iptable but I have no good idea because I have not done this before. Any special consideration do I have to take while doing this thing? How is it done and which file does it modify?
View 14 Replies View RelatedI installed and configured LDAP server and client on RHEL5 successfully. Problem is that when I add more than one user on server and clients, It shows error 'invalid user'.When I run the command:-#chown -R user:users /home/user, It shows error 'invalid user'. by step for adding and modifying more users in ldap servers.
View 1 Replies View RelatedHow do clients handle offline syslog servers?Will the log files be buffered locally to be sent to the syslog server when it comes back online, or will any log data generated during downtime be lost in cyber space?
View 1 Replies View RelatedI'm trying to setup a server at home, it has some practical implications, but largely it is just to take a stab at it. But I need the help of someone with more experience than I in defining exactly what I'm looking to do.
Here's what I have: old PC running Gutsy server connected to router. Several laptops at home connected via wifi to router. All laptops running either Windows or Ubuntu. Here's what I'm looking for: The server centralizes file storage for all clients. I would likely incorporate a RAID and some synchronised imaging of the files. I also want the server to create disk images of the clients hdd, regardless of client OS.There would also be some shares that would be publicly accessible (myself and friends accross the country would be able to access the same drive).
So I was thinking something like what corporate environment would be nice, you log into a profile that exists on the server. Like a dumb client...all data would be stored on the server. But I'm thinking that's more like a network boot and wouldn't work via wifi (or would it?). Also that wouldn't lend itself well to laptops used on the road in areas without net access. now I'm thinking each client would have its own locally installed OS, and they would just access networked shares. I could store sensitive files on the shares, but that wouldn't provide complete backup solution for each client.
Without rambling on anymore, anyone care to throw out some ideas? I'm really just looking to see if I can do what I want. The focus is on centrallizing files, securley backing up data and client OS's and ability to restore said images quickly.
I would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies View RelatedI'm attempting to run a DHCP server on my home network to enable PXE booting for ethernet clients, but I'm having quite a few issues getting it all up and running. I'm not entirely sure what is wrong, but I keep encountering errors in syslog as follows:
Code:
Feb 27 02:26:46 servnerr-1 dhcpd: Wrote 0 leases to leases file.
Feb 27 02:26:46 servnerr-1 dhcpd:
Feb 27 02:26:46 servnerr-1 dhcpd: No subnet declaration for eth0 (192.168.1.3).
[code]....
Networking is not exactly my strong suit, but I would like to get this up and running if at all possible.
I need to copy some files from an OpenBSD 4.5 server to my Ubuntu set up via flash disk tell me what commands to enter on each in order to do this please? I believe OpenBSD is UFS and I'm running 9.10 so Ubuntu is ext4
View 9 Replies View RelatedI administrat a school in Denmark, with around 40 clients runnig xp pro and a windows 2003 server, but i read about the possibility of running a linux server, with thin clintes that can run from the server, if it has network pxe boot.
I was wondering if anybody now any links to a good how to page, on what is needed on the setup side of the server, and clients. To make it work. And i have to use my dhcp from the win 2003 server. Is that possible.
Im having a problem with our pxe environment. We have around 200 clients per server to boot from tftp and when we hit 250 the service just freezes. So, our options are to either add more servers or move to a more robust protocol. Is this feasible?? How can clients boot from ftp?
View 3 Replies View RelatedI install clonezilla onto ubuntu but I cant get the clients to boot and the steps i find in the tutorials don't really help or apply.
View 5 Replies View RelatedI have got a 10.4 LTS LTSP server running as i needed it should do.
When i boot-up one of the terminal it sees the DHCP and starts loading from the LTSP all working ok.... when it gets the login screen some of the terminals get the box on the screen to enter the user name and password. the other terminal dose not.
The work around i have got is that i have to click on the blank screen at the bottom left to get the "pick a session" button then i can login and can login as normal.
When all the clients login all is well, And works as if the system was loaded locally its fast and at the mow its reliable. The only thing that is not working as it should is the log in screen.
I'm swapping from an OpenBSD 4.5 DHCP server to using Ubuntu 9.10 I notice in /etc/samba on Ubuntu there is a file called dhcp.conf with the singular line "wins server ==" There is no corresponding file in OpenBSD so how do I configure this file
View 2 Replies View RelatedI would like to know whether ldap can be used to authenticate wireless clients with my server.server and clients are connected to a wireless router and i am able to get wireless adapter work in my ubuntu. Is there any anything extra which is required or the openldap server will work for wireless clients?
View 1 Replies View Relatedalright so i set up dhcp server and my clients are getting ip's, can ping each other, and can ping/ssh the server. but nowhere beyond that.
however if i ping an externel site, i get its IP addr, but no pings (100% loss)
im ripping my hair out over this. i know that iptables is right, but i dont know about dns
idk if this helps:
Code:
pavel@ubuntu-server:~$ cat /etc/network/interfaces
auto lo br0 eth0 eth1
iface lo inet loopback
#mapping hotplug
[Code].....
I do not understand this command well. Yes, I have looked at man route and that whilst that gives lots of information about the switches I cannot see it in context. I have a server with two nics. One to the Internet (eth1) and one to the lan (eth0). I use pppoe and when it is running I get a virtual adapter appear in ifconfic called ppp0 which shows the public DNS and ISP session IP. I entered the command:
route add -host (gateway IP) dev eth1
and get the Internet to appear on the server. However, I do not get the Internet to the clients. I have turned off the firewall to be sure that this is not the problem.
We have been using Ubuntu 8.04 with ltsp the server is Intel P4 with 2 GB Ram and the 8 client consist of either Atom or old P3 and P4. Now we want to increase the clients and want to upgrade to latest ubuntu 10.04.
I heard AMD does excellent job with LTSP but is it possible to have intel clients and AMD as a server. If not then which the best intel server I can have other than xenon (Bcoz of the price factor i dont want to go for that)
On a Lucid server, dnsmasq is happily running DHCP together with a local DNS; although, in setting up NFS, I seem to have a small problem... I have /etc/exports referencing the hostname of the clients but these IPs change when the DHCP lease is renewed. Unless I restart NFS or run exportfs, I cannot mount the exports on my clients. I know that it would be good to make the all the addresses static; however, I was wondering whether there is another way to configure NFS such as possibly adding in a script to continually monitor /var/lib/misc/dnsmasq.leases and re-export accordingly?
View 3 Replies View RelatedI must be very thick as i cannot seem to get my dhcp clients to connect to the Internet properly.
on my lucid server i installed dhcp3 server and bind9, i can ping and dig all on the local network. on the clients however, as soon as i go out of the local network there's messages like "unknown host www.google.com" or "network is unreachable".
I've successfully built my server, and any fat or thin client that I connect to it boots wonderfully, with great response. I've gone through this exercise because we need a more efficient way of testing computers before delivery to our customers. So, I'm trying to run Passmark's BurnInTest. I've run it before with previous versions (9.something, I think) and it worked well, but I needed to build a new server so we can test more computers concurrently, so I figured I'd get the latest release.
My problem occurs when I try to run BurnInTest - it must have root access to test the local USB, parallel, and serial ports, and the optical drive. For the previous iteration I used a script that dropped into a local xterm session, su'd to a root session, and called the BiT GUI. In this attempt, the same scripts, even when I single-step them manually, results in 'authentication failure' when the su is attempted.
I have enabled the root account and created a password for it in the chroot /opt/ltsp/i386, and rebuilt the image, multiple times, no joy. Using ctrl-alt-F1 I can log in as root, and using dmesg I can see the USB device register when I connect it, so as far as I can tell the root account is alive and well, just not available in a local xterm session for some reason.
I have one local mail server hosted in Mdaemon in my office and ip is 192.168.10.2. My clients can't use the email from the outside. If they want to use the mail, they need to come to office. I want them to use from the outside. How can i set up the mail server. Do i need to host the server on the hosting? I want to synchronize with my local mail server. I don't have the public IP BTW.
View 2 Replies View RelatedI am trying to find some ideas on debugging clients and servers. For example, what would be -really great- is to
1. start a debugger with a server (running on a port)
2. start up the client (using a debugger).
Run the client and then trace the processing from the client side to the server side.
How can one accomplish this?
I have downloaded valgrid and Qt Creator - but not sure how one can use both.
what are use cases for static ip address for clients or servers.
View 3 Replies View RelatedI'm running a small ejabberd server on a LAN. Everything works fine out of the box except that when certain users disconnect they remain listed as online.
Specifically, Linux users who suspend their computers with their client still open are still listed as online. This is not the case for Windows or Mac clients.
I did some research and fount out that it has something to do with the TCP keepalive timeouts on the server. However I cannot figure out how to set those times.
I have an embedded server running Ubuntu which is on a network with a lot of wireless AP's. The AP's doesn't support SNMP or anything else, so I monitor if they are up or down by simply pinging them continuously.
My question is if there is anything I could install on the server that could provide me with a webpage where I could see the ping time to the AP's? So it just shows a list of the IP's I have told it to ping, and what their latest response time is. This is what I basically need, but if it were more advanced than that, and could give warnings if ping time were to high etc.
I'd like to set up a Ubuntu server with windows clients running roaming profiles. I know this is possible but do not know how to set it up. Does anyone know of a guide or anything that can explain this?
View 1 Replies View RelatedI'm working on CUPS server here now, I am new to the whole Fedora area, I'm starting to like it, tackling one service after the other. I have cups, which I don't recall installing but was there guess its a default. So I added a printer on my server, that was on a 10.0.1.1 block, added it as lpd://10.0.1.1/lab3printer. Ok that worked and printed from my server, but my problem is when other machines try to add the printer. I continue getting this problem
Alberto "recoverable: Network host '10.0.11.25' is busy; will retry in 30 seconds..."
On the computer it was added as printer lpd://10.0.11.25/alberto because my server has that IP and printer well named it alberto. I followed what this said with the xined.d [URL].
I've done this before, maybe ten times. This time is different. I don't know why, but Samba will not allow any clients to connect.
I've done:
- installed samba
- setup the samba shares
- have a samba user/passwd
- authentication = users
- punched in the samba stuff for firewall
- workgroup is set right
What the heck? I cannot get any client to connect. Not even the server machine can connect to itself through a client. What am I missing here???
Just for the record, I'm trying to connect to \SERVER:
Code:
Code:
I removed a whole lot of comment lines in the config file.