Ubuntu Servers :: Running Localapps In 10.04 LTSP Clients?
Dec 8, 2010
I've successfully built my server, and any fat or thin client that I connect to it boots wonderfully, with great response. I've gone through this exercise because we need a more efficient way of testing computers before delivery to our customers. So, I'm trying to run Passmark's BurnInTest. I've run it before with previous versions (9.something, I think) and it worked well, but I needed to build a new server so we can test more computers concurrently, so I figured I'd get the latest release.
My problem occurs when I try to run BurnInTest - it must have root access to test the local USB, parallel, and serial ports, and the optical drive. For the previous iteration I used a script that dropped into a local xterm session, su'd to a root session, and called the BiT GUI. In this attempt, the same scripts, even when I single-step them manually, results in 'authentication failure' when the su is attempted.
I have enabled the root account and created a password for it in the chroot /opt/ltsp/i386, and rebuilt the image, multiple times, no joy. Using ctrl-alt-F1 I can log in as root, and using dmesg I can see the USB device register when I connect it, so as far as I can tell the root account is alive and well, just not available in a local xterm session for some reason.
View 6 Replies
ADVERTISEMENT
Oct 26, 2010
I'd like to set up a Ubuntu server with windows clients running roaming profiles. I know this is possible but do not know how to set it up. Does anyone know of a guide or anything that can explain this?
View 1 Replies
View Related
Mar 10, 2011
I have an Edubuntu server with two nics joined to the primary windows domain and I can log on with domain credentials and everything is AOK. I used LikewiseOpen 6 to join the server to the primary domain. So, on my Edubuntu server eth1 is connected to the primary domain and has a static IP. eth2 also has a static IP and is the DHCP for the thin client subnet, connected to a switch. IP forwarding is enabled.
DOMAIN - eth1 - Edubuntu Server - eth2 (SUBNET) - switch - clients
So far, so good: I can log on the thin clients with one of the local accounts specified on the Edubuntu server and with that account I can surf the net and, if I supply domain credentials, browse the primary domain. Problem I have is:
I can't work out how to log on to the primary domain with a Active Directory account directly from a thin client. If I try DOMAINuser to log on, after giving the password, the password screen refreshes and 'domainuser@11.*.21.*'s password' appears under the blank password box. The IP in that message is the IP for the subnet and not the primary domain. I feel like I'm miss-understanding some basic simple step but I just can't figure it out.
View 6 Replies
View Related
Dec 10, 2009
My 32-bit Ubuntu 9.10 [Karmic Koala] LTSP server has two NICs, one with Dynamic IP set by a DSL modem and the other with static IP of 192.168.0.254. I also have 4 thin Clients that boot from this server without any problems and another computer with Ubuntu 9.04 running some PHP programs with dynamic IP given by the same DSL modem. When I send requests to these PHP programs from thin clients, they all give the LTSP server's dynamic IP as their IP so I cannot trace who has sent this request to response back.
I actually know this is logical. Because the requests are sent by a program that's actually running on the LTSP server rather than the thin client. But my question is How can I run a program on a thin client with it's own IP? I also should mention that the dhcp3-server service running on the LTSP server has no conflicts with the DSL dhcp on the network and I know that the 4 thin clients get the IPs ranging from 192.168.1.101 through 192.168.1.104 from the dhcp3-server service. Because I can ping them while they're on. but /sbin/ifconfig on them shows info about the LTSP server.
View 1 Replies
View Related
Aug 24, 2011
i set up an ltsp server on debian squeeze. after a standard installation, sound doesn't work on clients.
[code]...
when i start iceweasel normally (executed on server side), i get sound on the client. when i start ltsp-localapps iceweasel, i get no sound on flash sites and videos videos.what's wrong ? with local apps, is it possible that the flashplugin-nonfree doesn't talk to alsa ?
View 1 Replies
View Related
Apr 30, 2010
Version 9.10 had been installed via the alternate CD as the LTSP Server Edition. In place upgrade to 10.4 completed normally via Update Manager. However, LTSP terminal boot now fails with error "Forbidden directory" and "Access Violation". The following was found . Ubuntu 10.4 uses tftp-hpa. Either this is a change from Ubuntu 9.10 or the default behaviour of tftp-hpa has changed. So now, the filename argument given in /etc/ltsp/dhcpd.conf must include the full pathname. The previous requirement was to exclude the chroot path. If this is documented somewhere, I missed it. And after modifying /etc/ltsp/dhcpd.conf, do not forget to restart the dhcp daemon $ sudo /etc/init.d/dhcp3-server restart
View 7 Replies
View Related
Dec 4, 2010
I got myself a HP t5000 series Thin client to use on my LTSP 10.04. I changed the Bios to boot PxE. When i restart the thin client it asks for a DHCP and finds the LTSP-DHCP server all is good. Its got a IP address ok, the boot process starts. ok I get the Splash screen for Ubuntu. and all is going well. ok I no get a login screen. All is going very well. (As normal with Ubuntu). I can login all is good the login starts and i get the start up sound.But then where normally one would expect to get a desktop, one gets a login screen. Not knowing the full boot procses im not sure where to start to look. Knowing linux there would be a log file somewhere, that stores the LTSP Terminal Bootup/login process and would tell me where its stopping/failing.
The good news is that when i boot a fat client in all works ok and i an able to get in with a desktop.
View 5 Replies
View Related
Feb 17, 2011
I setup Ubuntu 10.10 (edubuntu) along with ltsp. I have an environment with a windows network (192.168.1.0) and a subnet (192.168.0.0) that the new terminal server is on. Everything seemed to be connecting properly, but when I attempted to boot the first client, I get the error message: "Cannot connect to NBD server".
View 1 Replies
View Related
Jan 25, 2010
I want to been able to connect remotely via RDP protocol with a client (for example from work to house) and I found that I can use [URL... What packages I need to install, and how I configure it? I connect my laptop via wireless throught eth2.
View 4 Replies
View Related
Feb 17, 2010
In Jaunty (9.04) I've setup a small (eleven-terminal) ltsp network at the local school. It handled around 6600 working hours with ease.
Now I've upgrade the server to Karmic Koala (9.10) and it just stopped working.
1) The clients have PXE NICs
2) They get the proper IPs from the DHCP server and respond appropriately to changes in the DHCP configuration files.
3) DHCP server also points the clients to
filename=/ltsp/i386/pxelinux.0
4) When the clients try to download the pxelinux.0 over tftp they just timeout
5) /etc/inetd.conf has an entry like
tftp dgram udp wait root /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot
6) The file /var/lib/tftpboot/ltsp/i386/pxelinux.0 exists on the server
I'm lost at all these configuration files and protocols.
View 7 Replies
View Related
Mar 8, 2010
I've just installed Ubuntu 9.10 64bit on my new server and then built a 32bit image. When I try and boot my thin clients I get the following error on VT7:
Code:
mount: according to mtab, aufs is already mount on /
mountall: mount / [416] terminated with status 1.
mount: according to mtab, none is already mounted on /proc
mountall: mount /proc [409] terminated with status 1.
mount: according to mtab, none is already mounted on /sys
[Code]...
View 4 Replies
View Related
Sep 3, 2010
I am currently running LTSP on Ubuntu 10.04. It is a dual gig nic setup with 16GB of ram and dual AMD quad core 2.4s. I installed all the latest updates as well as likewise-open so we can use AD authentication. When testing the configuration in the lab, I boot 32 clients that successfully reach the login screen. Here comes the interesting part, I can log in, using all unique AD accounts, up to 22 clients. When I attempt to log in to the 23rd client LTSP hangs. If I restart a client it will retrieve an IP address, but TFTP will eventually time out. All of the clients are connected to a Gigabit switch along with the server so network speeds are not an issue. When I run system monitor it only shows 3.6GB of memory in use and the processors are all under 10% utilization. I have beating my head against this issue for 2 days .
View 1 Replies
View Related
Dec 21, 2010
I have been at this for what seems like forever but i am getting somewhere after many errors i got dhcp3 reading the file and everything is almost there but now i got an error i cannot figure out.first my config file
HTML Code:
shared-network local {
subnet 192.168.0.0 netmask 255.255.255.0 {
[code]....
View 8 Replies
View Related
Apr 1, 2011
In internets there are lot of successless stories installing ltsp on ubuntu 10.04. Most problems are in ndb, init scripts and somewhere else, which are hardly debuggable. It seems like ubuntu 10.04 has ltsp packages completely broken and abandoned. Have someone succeeded to install ltsp on 10.04 without hard brainfucking? Maybe it's better to install ltsp from scratch, or choose another distribution?
View 3 Replies
View Related
May 2, 2011
I upgraded my Edubuntu 10.10 LTSP server to 11.04 and I've lost my network. The server boots fine but none of the workstations connect. They start the boot process but hang-up as it starts to load the GUI.The screen on-which the computers hang displays Ubuntu 10.10.Do I have to manually update the LTSP image?
View 1 Replies
View Related
Mar 17, 2010
I want to install Ubuntu LTSP on top of an already existing system. However, I want to use a different DHCP and TFTP server. Do I simply just install 'ltsp-server-standalone' with apt and run 'sudo ltsp-build-client', stop the DHCP and TFTP server and stop them from starting automatically? Would I then just copy over the pxelinux.cfg/default file from /var/lib/tftpboot along with the initrd.img and vmlinuz images to the TFTP server?
Edit: Do I need to actually copy the whole /var/lib/tftpboot/ltsp directory over to the TFTP server?
View 1 Replies
View Related
Apr 21, 2010
I've been asked to investigate the possibility of using LTSP in our school to provide a more "real world" programming environment to our students. We have a Windows 2003 Server domain and no plans to change it.I've set up the LTSP server, joined the domain and everything seems to be working fine, I can login to the LTSP server with a student account.
The next thing I want to achieve is give the students access to their "My Documents" folder on the Windows 2003 server. Is it possible to have a student log on to the terminal server (who has never logged in before) and have it automatically mount their share on the windows server?
View 1 Replies
View Related
Apr 7, 2011
Server is 10.04 server edition
[code]...
soon kernel panics. What else to fix here?
View 3 Replies
View Related
Jun 6, 2011
I have been working/implementing LTSP based thin clients now using Ubuntu 10.04 LTS 32bit server. I intend to change the default purple Ubuntu splash. I have already removed the "quiet splash" parameters in the pxeconfig file. And it works, giving me a text boot. But what i needed was a replacement for the splash.
View 1 Replies
View Related
Dec 12, 2010
I have recently installed an ltsp system, client and server. Everything works except i cannot get my client side serial ports to work or register for that matter. Can anyone point me to the steps i should take to get these working.
View 1 Replies
View Related
Feb 3, 2011
when i want run "ltsp-build-client" command i get this error: ERROR: fc14 is unsupported i want know there is any plan for ltsp 5.2 support in fedora 14 and how i can solve this problem for use ltsp in fedora 14.
View 2 Replies
View Related
Apr 22, 2010
I just started experimenting with LTSP-KIWI. Setting the system up by quick start guide worked flawlessly. Now I'm trying to add some localapps into kiwi image (using guidelines of wikipage LTSP/Localapps). I changed this line in /etc/sysconfig/kiwi-ltsp:
[code]...
Do I need to change the config.xml or do I have to build the image some other way?
View 2 Replies
View Related
Feb 9, 2010
I have setup Ubuntu 9.10 ltsp server, and have the client connected with login screen. I can log on the client successfully , but I did not get to the window environment, just see a busy mouse pointer on client screen and the screen of the server is scrambled ... and not viewable. I built the image by ltsl-build-client The server is amd64 version and the client is i386 version.
View 1 Replies
View Related
Jul 22, 2011
I am trying to install and configure LTSP on a server for a HP thin client to boot off. The version of Ubuntu that I am using is 11.04 x86 and it is a fresh install on a dual core system with 2GB RAM. I followed a guide which comprised of these commands.
sudo apt-get install ltsp-server-standalone openssh-server sudo ltsp-build-client or if your on a 64-bit system with 32-bit machines do sudo ltsp-build-client arch i386 for editing the servers IP values use /etc/ltsp/dhcpd.conf after that you need to restart DHCP server sudo /etc/init.d/dhcp3-server restart
and update sshkeys -sudo ltsp-update-sshkeys and if you updated dhcpd.conf then you need to update you image also by typing in terminal ltsp-update-image
Everything seemed to install as it should but when I try to boot from the thin client it just times out and says no DHCP or proxy invites received. I turned DHCP off on the router and even tried another router, but I still get nothing. I am at a bit of a loose end and I hope someone on here can point me in the right direction of where I am going wrong.
View 1 Replies
View Related
Sep 28, 2010
I've been the las 4 days setting up my first VPN (OpenVPN bridged). The server is up and running OK but when I try to connect I've got this message in the client log.
Quote:
TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
TLS Error: TLS handshake failed
[Code].....
View 4 Replies
View Related
May 26, 2011
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies
View Related
May 6, 2010
I administrat a school in Denmark, with around 40 clients runnig xp pro and a windows 2003 server, but i read about the possibility of running a linux server, with thin clintes that can run from the server, if it has network pxe boot.
I was wondering if anybody now any links to a good how to page, on what is needed on the setup side of the server, and clients. To make it work. And i have to use my dhcp from the win 2003 server. Is that possible.
View 5 Replies
View Related
Jul 28, 2010
Im having a problem with our pxe environment. We have around 200 clients per server to boot from tftp and when we hit 250 the service just freezes. So, our options are to either add more servers or move to a more robust protocol. Is this feasible?? How can clients boot from ftp?
View 3 Replies
View Related
Jan 28, 2011
I install clonezilla onto ubuntu but I cant get the clients to boot and the steps i find in the tutorials don't really help or apply.
View 5 Replies
View Related
Sep 17, 2010
I have got a 10.4 LTS LTSP server running as i needed it should do.
When i boot-up one of the terminal it sees the DHCP and starts loading from the LTSP all working ok.... when it gets the login screen some of the terminals get the box on the screen to enter the user name and password. the other terminal dose not.
The work around i have got is that i have to click on the blank screen at the bottom left to get the "pick a session" button then i can login and can login as normal.
When all the clients login all is well, And works as if the system was loaded locally its fast and at the mow its reliable. The only thing that is not working as it should is the log in screen.
View 1 Replies
View Related