Ubuntu Servers :: Unable To Locate Packages - Build My Own Server

Dec 12, 2010

I am a total noob in the process of trying to build my own server. I installed Ubuntu 10.10 but when I did that I didn't have the computer hooked up with an ethernet or have any internet connection. During the installation process it was unable to set up DHCP, so I figured I would just do that later, somehow.

Anyways, I recently hooked up an ethernet cable from the server to another computer, which has internet.

I've been slowly working my way through the Server Documentation and am on the Networking chapter. It has given me the commands to install wireless-tools, ethtool, dhcp3 server and I've also tried to install gedit. Every time it gives me the error: E: Unable to locate package XXX

When I ran the sudo lshw -class network command I find that it recognizes both an ethernet interface as well as a wireless interface(my wireless adapter). BOTH of them say *-network DISABLED.

My goal is to enable both of those, but I am assuming I need to be able to locate the packages first. I installed the server edition using a USB pendrive. I still have the files on the pendrive, but I don't know how to make the server locate those files. I'm guessing it wants to access the installation files to locate the packages to install.

View 7 Replies


ADVERTISEMENT

Fedora :: Gpodder Missing Dependencies - Unable To Locate Packages In F13 Repo

Jun 15, 2010

Code:

Missing components:

Is there a package that I can install that will satisfy this dependency? I am unable to locate anything other than the source here and here, but I'm also unsure if this is even the right package or if source this old is what gopdder is asking for. I'm looking for a package.

View 5 Replies View Related

Ubuntu Servers :: E - Unable To Locate Package Squid

Nov 13, 2010

Find error:

E: Unable to locate package squid

View 3 Replies View Related

Ubuntu Servers :: Error: Unable To Locate Package?

Mar 3, 2011

I have installed the latest server (Ubuntu 10.04). When I tried (including sudo apt-get update first followed by sudo apt-get install virtinst) I get Unable to locate the package virtinst. It also did it for a few others as well. The apt-get update command is successful (on the console it says it is Done). I have network connection (no proxy) and I am able to ping other systems at home and outside world. So I don't believe it is network issue.

View 1 Replies View Related

Ubuntu Servers :: Aptitude Updates - Gives Error Unable To Locate

Sep 14, 2010

New to Ubuntu not to Unix. I am having issues with aptitude updates. Gives error unable to locate. When I look for the file manually I cannot find it either. It is looking for http://us.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US. Is there a site that list all mirrors that carry the updates? I would like to find manually and adjust source.list file.

View 6 Replies View Related

Server :: Unable To Locate Package Apt-proxy

May 2, 2011

Just installed Ubuntu Server (Natty) and tried:

Code:

sudo apt-get install apt-proxy

But I only got:

Code:

Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package apt-proxy

View 2 Replies View Related

Ubuntu Installation :: Unable To Locate Package Nfs-kernel-server / Source For It?

Dec 1, 2010

I am an extremely new Ubuntu Server user. I am trying to install NFS on a new Ubuntu Server 10.10 installation. When running the command sudo apt-get install nfs-kernel-server nfs-common portmap, I was previously getting the message:

E: unable to locate package nfs-kernel-server

I'm sure I don't have the correct sources for installation, I just don't know source I need to add.

View 2 Replies View Related

Ubuntu Servers :: Build A Server With 8tb Of Storage

Jul 1, 2011

I am looking for the best/cheapest way to build a ubuntu server with 8tb of storage hanging off of it.

I don't feel it needs to be hardware raid, so more software raiding swap in and out failed disk drives.

The server itself normal duo core CPU with 2Gb of memory and i would like to have the internal drive of the O/S only.

View 8 Replies View Related

Ubuntu Servers :: Build LAMP Server Behind A Router?

Dec 9, 2010

I build a LAMP server behind a router. The current situation is:

1.I could access index.html of apache within the LAN.
2.I could access the vsftp outside of the LAN.
3.I could access the ssh outside of the LAN.

I have configured my router to do reflections(although I don't know it's correct or not.). I think the LAMP works good since I could use it inside the LAN. The configuration of the router is at least partly right because ssh and vsftp work fine(I test by browsing the ip:74.***.***.*** in the lan, not 192.168.1.8 --this also works. ).

I cannot access web service outside the LAN. And the error message is "Oops! Google Chrome could not connect to 74. Did I miss some configuration of router?Apache2?Ubuntu? I use the ubuntu server 2010.10 version.

View 3 Replies View Related

Fedora Servers :: Build Radius Server On F13?

Jul 16, 2010

i have a project from my boss to make radius server on fedora 13 i 686. can u tell the step by step how to build radius server on fedora 13???? thx u for sharing

View 3 Replies View Related

Fedora Servers :: Start To Build Up IMPS To Server

Oct 15, 2009

I start to build up IMPS to my server. Any ideas where to start? Any experience so far. I this think yamicocom like service. And about 5 bugs to get in. What you think? I need to put some extra to this basic concept.

View 2 Replies View Related

Ubuntu :: Basero Cannot Locate The File In The Packages

Aug 6, 2010

I try and burn a video DVD and I get the following message. p, li { white-space:pre-wrap; } brasero wants to install a file The following file is required:

/usr/lib/gstreamer-0.10/libgstmplex.so

I click yes and it begins to search and I get the following error message. p, li { white-space: pre-wrap; } The file could not be found in any packages. It will also give me this error message after I click OK All required applications and libraries are not installed. install the following manually and try again: mplex (GStreamer plugin) dvdauthor (application). I was able to locate and install dvdauthor via synaptic package manager but I was unable to find mplex there.

View 1 Replies View Related

Fedora Servers :: Build A 3 Node Web Server Cluster To Run A Php Application ?

Feb 24, 2011

I need to build a 3 node web server cluster to run a php application. Since the app requires users to login (which means a session state is to be maintained), I will be sharing sessions save path, I also need to share the application directory across 3 nodes. I having trouble deciding which cluster file system to select.

View 5 Replies View Related

CentOS 5 :: How To Locate Installed Packages

May 6, 2009

When configure packages bundled with CentOS, I have difficulty locating the installed directories. Anyway to locate those? I first worked on MySQL and now Firefox. They are not at the standard locations (or the ones refered in the manuals).

View 6 Replies View Related

Debian :: Cannot Locate List Of Essential Packages?

Oct 20, 2010

I fruitlessly tried to understand the mechanism of package clean in Debian. There are two types of packages: the one that are essential for user and dependencies of these packages. How could I found where the list of essential packages is kept in Debian? (in Gentoo it is called world-file)
dkpg -l shows me the list of all packages installed.

View 3 Replies View Related

Server :: Debian 6 Squeeze + "unable To Locate Package Vhcs"

Mar 19, 2011

I got Squeeze installed and choosed all the options at the installation ste like (web server, mysql server, DNS server) and then I am trying to get VHCS installed on the machine. apt-get install vhcs , is not working for me. I gues I have to add a source address to my sources.list file. All the manuals I've found so far for debian and vhcs is for debian etch or earlier and those sources they given arent working for me. I still get the message where it says "unable to locate package vhcs. What is the source address I can download VHCS?

[Code]....

View 5 Replies View Related

Debian Programming :: Installing Vmime But Apt-get Cannot Locate Packages

Aug 25, 2015

I have 32-bit Debian 8 and am trying to install Vmime [URL] .....

apt-get cannot locate these packages:

apt-get install vmime0
apt-get install libvmime-dev

I have an issue raised on Vmime's Github page too [URL] .....

View 1 Replies View Related

Ubuntu Servers :: Getting The Top Recommended Server Packages?

Mar 19, 2010

We're about to upgrade our Ubuntu server and are looking for a complete package set that includes a firewall, some kind of snoopy, and whatever else we "must have" or that would just be extremely useful. What do you guys find the most absolutely necessary and needed packages for running a linux server in regards to security and performance.

View 3 Replies View Related

General :: How Build Small A Packages

Aug 11, 2011

I want to build some small soft wares in linux .

Example there is OS called ttylinux [URL] it supports only few packages , example it doesn't support GCC compiler etc .. So I want built this packages to the os and create a final image out of it .

View 4 Replies View Related

Debian :: How To Build .deb Packages From Nvidia Installer .run

Feb 3, 2010

i want to build .deb packages from the official nvidia installer (one for the driver and one for the kernel module). How can I do it?

View 11 Replies View Related

Ubuntu :: Build Deb Packages For Two Versions Of Same Product That Can Be Installed On The Machine Simultaneously

Apr 28, 2010

I want to build deb packages for two versions of same product that can be installed on the machine simultaneously. The source folder structure for both the packages have a common folder needed by both the versions. So i need to keep the common folder till both the versions are removed from the machine.My problem is that i can't install both the versions at the same time, i.e i have to uninstall the installed version and then install the other version. After installing one version, if i try to install another version, an overwrite error comes up. is there any option in dpkg for overwrite? Or is there any way to partially uninstall a deb package?

View 5 Replies View Related

Debian Configuration :: Can't Build Modules With 2.6.38-2-amd64 Packages

Apr 14, 2011

My new laptop works out of the box except for the video and the ethernet. For this, I have to use a later kernel than the Debian kernel (debian squeeze is currently 2.6.32). Upgrading to the new kernel (without moving to the testing dist itself) was pretty easy. I just installed linux-image-2.6.38-2-amd64 and linux-base from the testing distribution by manually downloading and using dpkg. After that, ethernet and video started working.

However, my virtualbox installation no longer works because the drivers do not match the kernel. I am used to this; whenever debian upgrades the kernel on me, I have to run "/etc/init.d/vboxdrv setup". This rebuilds the drivers. This failed for me, however, because it could not find the headers. So, I installed some more packages:

linux-kbuild-2.6.38
linux-headers-2.6.38-2-common
linux-headers-2.6.38-2-amd64

Now, when I rebuild it, I get this:

# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules:.
Uninstalling old VirtualBox DKMS kernel modules:.

[code]....

View 14 Replies View Related

Fedora :: Package To Install To Build Packages From Source

Mar 15, 2010

What package do I have to install to build packages from sources? I am trying to build the TrueCrypt package from source.

View 1 Replies View Related

Debian :: Minimun Packages Required To Build Kde Apps

Jan 15, 2011

Debian squeeze amd_65, using gde3/gnome.I'd like to use KMyMoney, but the latest packages (v4.5.2) and not the v3.9.8/test version that's in Synaptic Package Manager.I'd rather not install every package that contains *kde* in the name, but I'm more than willing to install the minimum required to compile and run them.Trying to build kmymoney v4.5.2. After some google searches on the specific errors, I initially learned about apt-file and the find feature.

I'm unable to determine what package I need for 'Boost', and although apt-file reports that kdepimlibs5-dev is the package for gpgme - I still have no files called QGpgmeConfig.cmake or qgpgme-config.cmake, and the log still shows 'Could NOT find QGpgme'.Any pointers on what package(s) I'm missing, or other ways to determine what I need?

View 3 Replies View Related

Ubuntu :: Unable To Locate Package

Aug 9, 2011

I'm trying to install Ruby on Rails on an Ubuntu desktop VM. The network connection works ok but I can't seem to get this to work:

sudo apt-get install ruby1.9.2

I want the latest version of Ruby.

Is this because I haven't enabled some repository or something - I dimly recall having to 'enable universe' before now... but can't remember why or how....

View 3 Replies View Related

Debian Configuration :: Remove The Packages Installed From Using Build Dependencies

Jun 15, 2011

Does aptitude(or apt-get) have the functionality to remove the packages installed from using build-dep? It just seems convenient if you want to remove a program that was built from source.

View 4 Replies View Related

Fedora :: Build Packages For I686 And X86_64 Without Virtual Machines?

Jun 26, 2011

I have small question about building packages: is it possible to build packages for i686 and x86_64 (without virtual machines?)

View 2 Replies View Related

Fedora Servers :: Build A F12 Cluster To Run DHCP On Top Of Two Servers Using Pacemaker And Drbd?

Apr 28, 2010

I'm trying to build a Fedora 12 cluster to run DHCP on top of two servers using pacemaker and drbd. The pacemaker runs great but i'm having the hardest time getting DRBD installed.

My kernel version is 2.6.32.11-99.fc12.i686.PAE First i tried to [root@dhcp-primary drbd]#yum install drbd this doesn't give me everything because apparently the kernel module for DRBD must be built from source. so i unpacked drbd-8.3.6.tar.gz and tried :

[Code]...

I'm not very experienced in compiling from source i'd love to make an rpm for this but after scouring the web and trying different install methods, I am still at a loss.

View 2 Replies View Related

Ubuntu :: Apt-get - Unable To Locate Package Emacs23

Oct 25, 2010

I just changed (not upgraded, I made a clean install on a new hard drive) from 9.10 to 10.10 and I have a serious problem. I just can't install new packages. Neither apt-get nor synaptic can find any package. I either get a "E: Unable to locate package <package_name>", or "E: Package <package_name> has no installation candidate" For example when I type sudo apt-get install emacs23 , I get this output: Quote:

Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package emacs23 And the synaptics package manager only lists the packages I already have. I searched these forums and googled my error message, but I couldn' t find anything helpful. The only thing I know is that this is not a network/proxy problem, I am behind a proxy but I have set the http/https/ftp_proxy environment variables, and I have a working network connection, as I am actually posting from the same computer.

View 7 Replies View Related

Ubuntu :: E: Unable To Locate Package Covergloobus

Dec 27, 2010

I'm trying to install Covergloobus but it says it's not able to find it. It gives me this:

Code:

adrian@adrian-desktop:~$ sudo apt-get install covergloobus
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package covergloobus

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved