Ubuntu Servers :: Virtualhost - Within The Vps That Servername Is Directed To The Directory /var/www/the_directory
Jul 10, 2011
I'm sure it's a minor mistake; these are the steps I've taken currentdomain: domain i already have, and works. newdomain: domain i newly bought.
[Code]....
This is to make sure the files are actually there, this subdomain works... simply pointing to the same folder
[Code]...
- all ipadresses in the hosting service of the domain thing is pointing to the vps.
- Within the vps that servername is directed to the directory /var/www/the_directory
- That directory holds the actual website files. This is proven with the subdomain method.
View 3 Replies
ADVERTISEMENT
Sep 16, 2010
I didn't know exactly where to put this, but here it goes:For the record, I have Apache2 on Ubuntu.OK so I have a "svn" subdomain for SVN repositories. The repositories are actual separate repositories, not a big one for all. So I'm using SVNPath not SVNParentPath (please don't suggest this as a possible fix).
The problem is I want to be able to list the repositories (or even put a blank page for that matter) at svn.mydomain.com. All repositories have a svn.mydomain.com/myrepository path with a VirtualHost for each. So when I create another VirtualHost just for the / path, it overrides all the SVN VirtualHosts, as it covers / and all sub-directories.
I would like a way to set that VirtualHost to affect just the root directory, without the sub-directories. Or to make the SVN VirtualHosts override it. Either way, is this possible? What approach should I take? Thanks!
View 1 Replies
View Related
Apr 11, 2010
I've set up apache2, but I'm having trouble getting virtual hosts to work
my /etc/hosts
Code:
127.0.0.1localhost
127.0.1.1johnny-desktop
127.0.0.1go
[Code]....
View 2 Replies
View Related
Aug 10, 2010
I applogies if this doesn't fit or if this is right in from of my face but, I'm a bit confused.I'm trying to configure a few VirtualHost in apache2. I currently a default virtualhost and 2 other sites. No matter which domain I visit I still get the default page.. My Confusion is, I've been reading and some places seem to say that my virtual hosts should be in /etc/apache2/sites-enabled/*Config File* and other seem to say it should be in /etc/apache2/httpd.conf what the awsner... I've tried both ways with no success .... If I put NameVirtualHost in httpd.conf I get an error saying their are no virtual hosts.
View 2 Replies
View Related
May 19, 2011
Ive made a site on my Ubuntu server and link the folder where it is with VirtualHost. The problem is, when i place mypage.com works, when try www.mypage.com goes to the apache "It Works" page.
View 4 Replies
View Related
Aug 25, 2010
I currently am running 10.04.1 and have successfully setup my home web server to run a single website. My current settings are:
-I have registered the domain name annarrankings.com through godaddy
-A record is - host = @ and points to = 71.114.220.3
-CName is - host = www and points to = @
-on my server I have the site running in /var/www
I've done some research and found that to run multiple websites I need to setup VirtualHost.
-So I created a folder /var/www/annarrankings.com and moved my site to that folder
-Edited Apache2.conf to add the following line
-I then went to /etc/apache2/sites-enabled and copied the default file to a new file called annarrankings.com. Here's the annarrankings.com file after I edited it
-I then created a link in /etc/apache2/sites-enabled to the annarrankings.com file in /etc/apache2/sites-available
-Next I editied /etc/hosts
-When i went to enable the site using a2ensite annarrankings.com I got the following
I figured this was ok since I had already created a symbolic link earlier (a result of trying to following multiple tutorials and ..... videos at once) so I reloaded apache2. I created an index.html file in /var/www/ just for testing purposes and when I load www.annarrankings.com I get the file located in /var/www/ instead of the website located in /var/www/annarrankings.com Do I need to change my A record or CName in godaddy or did I just do this completely wrong?
View 8 Replies
View Related
May 6, 2011
whenever i try to do any ssh related activity like.ssh <servername>, scp some files to a server i get =true prompt and nothing happens.For example:
Code:
# scp file1.txt SERVERIP/HOSTNAME:/usr/local/sbin/
root@SERVERIP/HOSTNAME's password:
[code]....
View 6 Replies
View Related
Jan 24, 2011
I have a few mail servers (CentOS 5.5) that are running OSSEC Active Response (2.5.1) on Iptables (1.3.5-5.3.el5_4.1). We are currently having a problem where we get loop hook errors:Jan 24 04:15:03 servername kernel: iptables: loop hook 1 pos 464080 00000022 this is the firewall-drop.sh we are currently using:
Code:
#!/bin/sh
# Adds an IP to the iptables drop list (if linux)
# Adds an IP to the ipfilter drop list (if solaris, freebsd or netbsd)
# Adds an IP to the ipsec drop list (if aix)
[Code]...
View 4 Replies
View Related
Aug 29, 2011
Is there a way to configure Apache so that if a user tries to access a webpage that doesn't exist under mydomain.com, that it redirects that user to the index.php?
View 1 Replies
View Related
Jul 9, 2010
I want to update all the machines in the network from a central repository which is on my master server and whose archive directory is shared through samba.I searched in the man page of sources.list and found that there is an option for this but can't able to implement this. Can anybody kindly tell me the way to do the same.
View 1 Replies
View Related
Sep 20, 2010
I've gotten the Ubuntu Broadcom STA driver working on my AppleTV by (not blacklisting) adding the appropriate rmmod statements to my rc.local script. The system now recognizes the card; lswh -C network:
[Code]....
I can now successfully join wifi networks on the device. My ultimate goal is to create a wifi AP using the card via Ubuntu. The card is a bcm4328. I have attempted to create a wifi hotspot using the "Create new network" menu item from the network menu applet. When I try to join the network on my MacBook, it apparently can join successfully, but then gets a "Self Assigned IP" which is outside the LAN's subnet (which is 192.168.200.X, while the IP on the MBP is 169.254.161.193 and the network control panel indicates that it is self-assigned).
It would appear that the AP on the AppleTV is not bridged with the wifi. I have attempted to follow the CLI-based tutorials but chickened out when I saw I had to set the card to master mode as I do not believe the bcm4328 is capable of this.
View 3 Replies
View Related
Aug 22, 2011
I am setting up a VirtualHost on my Apache. I am quite not familiar with Ubuntu setup so I am wondering what will I do with the 000-default file (which contains a template of virtualhost syntax)? What filename will I save it to?
View 1 Replies
View Related
Jul 25, 2010
I created a new user "www". I can login with this user. I can send emails (using sendmail) from this user to other users. But this user cannot receive any email. All emails sent to "www" will go to "root" mailbox. Is "www" a special account under sendmail that all emails will be re-directed to "root"?
View 2 Replies
View Related
Nov 3, 2010
I have figured out how to use virtualhost, proxypass and proxypassreverse. So far, so good.
The problem I'm experiencing is this:
I have a reverse proxy server running apache (123.123.123.123)
Behind this proxy server I have a http server running apache (124.124.124.124).
This http server has multiple sites (virtualhost), it's only reachable via the proxy server.
If i run a nslookup on www.somedomain.com I get 123.123.123.123 (Not really but you understand what I mean)
I put my proxy to have the IP 123.123.123.123, so far so good. The requests come in to the proxy server.
I want my http server to be named 124.124.124.124.
In the http server I wish to set up my virtualhosts like this:
How do I get my proxy to grab the data from the http server?
If I do like this I will only make another request to my proxy server.
If I do like this, only the first page in the httpd.conf in my http server will work.
Do I need to setup a different DNS server for the proxy server? I would hate that. Perhaps use hosts-file in proxy. Or maybe I can use sub-domains?
View 1 Replies
View Related
Jun 9, 2011
I need to ask how to add new virtualHost in litespeed.I just installed it.
View 1 Replies
View Related
Jul 31, 2011
We'll yesterday I got a new server and just installed Linux Debian. The thing is it's been so long (for over 5 years) that was the last time I set up virtualhosts in apache. The thing is I googled around a bit and supposedly my virtualhosts are OK, but I get this WARN when I restart apache2:
[Code]...
View 1 Replies
View Related
May 15, 2009
My server running CentOS 5.3. I use yum to install httpd, httpd-devel, php and it's module to run my site.
When I setup VirtualHost, i open httpd.conf and add some directive:
View 3 Replies
View Related
Aug 25, 2010
I currently use 192.168.1.10:85 to refer to my localhost ip address, and I setup port-based virtualhosts because this seems like the only feasible/practical way to view this from within Windows XP on my Debian's VirtualBox. Is anyone else aware of some advanced techniques in which I could view it by the ServerName instead? I would assume I have to hook it up to some sort of DNS server? I know I can also edit the hosts file in my Windows XP and point certain urls to my IP address, but it will always resolve to the primary default virtualhost.
View 1 Replies
View Related
Dec 16, 2010
I created VirtualHost in apache configuration file.
Code:
NameVirtualHost 77.79.13.20:80
<VirtualHost 77.79.13.20:80>
DocumentRoot "/var/www/host"
ServerName host.t2p.lt
</VirtualHost>
[Code]...
View 1 Replies
View Related
Dec 5, 2009
I am a novice with linux but I pick up stuff pretty quick so far I have been able to figure everything else out except this, I have read all the documentation on apache 2 and getting virtual hosts to work and it appears I have everything setup right but yet I still can't get it to work, I have googgled my brains out and I still can not figure out whats going on here is my setup.I have two websites that I am trying to get to load[URL]I have webmin installed and I'm using their utilities to setup virtualhost. heres how it looks in my http config:NameVirtualHost 24.189.245.44:80 ( I have tryed * in place of my external ip)
<VirtualHost *:80>
DocumentRoot /var/www/html/gamerbreed
ServerName gamerbreed.com
[code]....
View 3 Replies
View Related
Jan 25, 2010
I am trying to add a virtual host to my machine by name to the IP here.It absolutely refuses to work.it is a mess server I hope to upgrade soon, but it has 2 versions of apache running together on it.The first one (php3) just proxies all the requests from 80 to 8080 which has another instance of apache running php5.I don't know what else to do, it keeps defaulting to the host header error virtual host.
View 1 Replies
View Related
Jul 14, 2011
This morning it would not boot; when I tried to wake up the system, it gave me a bunch of errors, the last ones being as follows: "mount error: could not resolve address for servername: No address associated with hostname mountall: mount /media/shares [1402] terminated with status 1" I am writing this in Win 7 since I lost ubuntu. I am using ubuntu 11.04.
View 2 Replies
View Related
Jul 18, 2010
I have been trying to get my cgi-bin from /var/lib to /var/www my web servers directory. I used webmin as I run 10.04 lts server on a laptop. So I either ssh or use webmin to changes stuff on my ubuntu box. Using webmin I copied every directive from the /var/lib to my new one.
View 3 Replies
View Related
Apr 13, 2010
I was wondering if we could cd in the directory of the PATH variable. For example, if I type in echo $DISPLAY. It will give me /tmp/launch-3ee4fg/org.x:0
Is there any way that I can just take the value '/tmp/launch-3ee4fg/' from the output of $DISPLAY and exclude out the filename to the end of the command. I tried using the read command and the IFS variable..apparently IFS does not recognise / I guess.
View 2 Replies
View Related
Nov 29, 2010
using FTP Directory mounted, thus it could make my life easier. And the fact, it's not.well, I'm putting in the /etc/fstab file to be like this;
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[code]....
in a conclusion; every file i copy, move, to that mounted directory will fail. and the error given is that Input/Output error message only.Is it this effect, due to the script i put on fstab is wrongly?
NB: I'm using Ubuntu Server here.
View 5 Replies
View Related
Jan 9, 2011
I've got a Ubuntu 10.04 Server edition installed as a VMWare ESXi VM. It's been working great for about 6 months. This morning, after not making any changes, I started seeing some errors. First problem was that my website (managed by apache2) was offline. SSH/ftp didn't work either. So I go through the console through vSphere. Tried a quick ifconfig, and I got this:
Code:
bash: /sbin/ifconfig: No such file or directory
mmk. Tried ls /sbin/ifconfig, got this:
Code:
bash: /bin/ls: No such file or directory
[Code].....
Commands known to work: dir, vi, dmesg, rmdir, mkdir, ifup (but it then returns ifconfig not found), shutdown, reboot, fsck (but I chose no to prevent damage) Commands known NOT to work: ifconfig, ps, ls
View 9 Replies
View Related
Mar 28, 2011
I am trying to setup 2 individual FTP users. They should both have access to the same directory. They both need to be able to read/write into the directory. But, I want them not to be able to write to each other's files (e.g. delete, remove, rename, etc.).
So let's say the shared directory is: /home/ftp/shared/
UserA needs read/write access to /home/ftp/shared/. UserA should only have write access to his own files.
UserB also needs read/write access to /home/ftp/shared/. UserB should only have write access to his own files.
It would be a unix box of sorts, but that is the only restriction. I could use whatever software. I am currently thinking pure-ftpd or vsftp but I am open to all ideas.
View 1 Replies
View Related
Apr 9, 2011
I'm trying to jail a sftp user. All I want is for my daughter-in-law to be able to download pictures of my grandson on his step-uncle's motorcycle. But I don't want her browsing around. She's not a techie, but she's smart enough to catch on how WinSCP is looking at my files. I've set up the jail using jk_init, adding ssh, sftp, bash, netutils, basicshell, jk_lsh.
The physical root of the jail is owned by root, as are all the binaries loaded by the jk_init. The user's home directory is owned recursively by the user and is writable only by the owner. The passwd and group files are in the jailed /etc and populated by the user's lines. Shell is bash, and bash is there too. The error message must be coming from some other problem that's not notifying, but what?
View 4 Replies
View Related
Jan 1, 2010
I'm using VSFTP in my ubuntu server and I want FTP to show me only the /var/www directory and its files/sub-directories. How can I do this? This has to do with vsftp.conf?Also I've read is recommended to make a user only for FTP, thus limiting its access to the desired directory. How can I do such thing?
View 1 Replies
View Related
Jan 24, 2010
I'm running Ubuntu 9.10 with Kvm. I've used a howto to configure my network. Seems to work fine, I've installed the Virtual Machine manager, when I go to create my Virtual Machine, I see the the image is automatically created in /var/lib/libvirt/images. I have a totally separate path for my images. How to I configure a different image directory
View 1 Replies
View Related
