I want to search for all files on my server that end in a couple of differnet filenames, and then have the location of them sent to a file.
What is the best way to achieve this.
Missing ifcfg-eth[2-5] fileset for ZNYX 345Q Quad Port 10/100 cards. I have showing in the gui network device that my ports for my ZNYX ZX345Q Quad Port card my ports are Auto eth2, Auto eth3 etc. My Motherboard and Intel cards show as System eth0 and System eth1.
There ARE corresponding entries for those in my /etc/sysconfig/network-settings/ directory, but there are not ifcfg-eth[2-5] files to correspond to these adapters. Can I just write my own files and that will do it?
How does Fedora 12/13 load these drivers into the kernel without having these ifcfg files?
I'd love to know if there is another way Fedora controls NICs / other system resources.
I'd like to know how to see which files have been printed on the printer. I can see which print jobs have run and who submitted them using the following command:
Code:
$ lpstat -W completed -o
but it doesn't show me the names of the files that printed.
Is there a way to set a retention policy to have it hold the job in the queue even after it's finished printing? Or a command to view the details of jobs that have already run? I'm looking for something similar to the output of the lpq command.
I am using find some_dir -name "*.some_ext" | xargs -l10 grep "some_expr"
to find files in folder, but I just want to display the file name but not all file content. Any solution?
I need to create a report ,
The data is spread across two files in below format,
File 1
=========
<Class Name1>
Ph: 001
Place: place001
</class>
[Code]....
for example we search a file for a certain keyword..is there any application available which will enable us to search for a single keyword in all the files within the folder ?i want to search for a keyword in about 1000 files..if i do it manually it will take loads of time..
View 6 Replies View Relatedis it possible to log the command output's history that are previously printed messages in the terminal to a file? that is the first command output when i first opened terminal through the last command.
View 5 Replies View RelatedSo I've got a home server hosting a website for my restaurant, but I'd like to get another server up to get some redundancy going.
I have another machine I'd like to set up at another location to take over retrieving requests sent for the website whenever my home server goes down. I've got my domain through [URL], but the domain is hosted through [URL] for their dynamic dns service (because im not using a static ip).
So I'm guessing having another server set up is just a matter of setting up dns records, however I don't know where to begin with setting that up. Any words of wisdom out there?
I can start "Search for files" from menu
Applications->Accessories->Search for files....
and it works fine.
However I would like to put it into the context menu of the Nautilus File Browser.
When I select it e.g. for folder /home/peter
then the start base directory should be obviously set AUTOMATICALLY to /home/peter
Suppose I have a tree structure like this:
/home/mahmood/sim/a/b/file1.cpp
/home/mahmood/sim/a/b/file2.h
/home/mahmood/sim/a/c/file3.txt
/home/mahmood/sim/d/file4.txt
How can I copy all of them to /home/mahmood/sim. So that when I run "ls" in /home/mahmood/sim, I see all files:
file1.cpp
file2.h
file3.txt
file4.txt
Can 'cp' search for all file and copy them in another folder?
Is there a way to set Firefox to place downloaded files in different folders based on the file type?e.g. in my Downloads folder place all .doc files in a sub-folder called ".doc", all .jpgs in a sub-folder called ".jpg"I'd assume there's probably a rule, or a script that can be used to accomplish this, but being a graduate student, I don't have alot of free time to poke around and figure it out myself
View 9 Replies View RelatedI am completely new to compiling the kernel. Trying to compile on an old Dell C610 laptop that has Debian 6.01 installed and working. Here is what I have done so far:
Downloaded linux-3.0.tar.bz2 to home directory Also downloaded patch-3.0-git13 to home directory tar xjfv linux-3.0.tar.bz2 which uncompressed the tar ball in the created the linux-3.0 directory in my home directory
[Code]...
I recently viewed a few .mpg s from the Internet by selecting to open them in movie player. Those videos are listed in the recently opened files list under the 'Movie' menu. I was trying locate these files on my computer since I can still play them by clicking on them in the 'Movie' menu, but I can't figure out where they are. I tried using 'locate' on the command line and it isn't bringing anything up. Can anyone tell me how to find the location of these files?
View 2 Replies View RelatedI have several albums in my Rhythmbox library that I originally ripped in 128kbps and have listened to many times. I'd quite like to reimport the songs in higher quality now but don't want to lose the playcounts associated with them.Is there any way to transfer the playcount over to the new file as it were, or to manually edit the playcount or file location?
View 6 Replies View Relatedsuppose i have two file with same name fstab one file is located in /etc and the other is located in /root/ If i make a change in /etc/fstab file the changes has to reflect in /root/fstab . Is there any command to do this?
View 6 Replies View RelatedI have a bit of a problem and the only solution I can think of at the moment is a very tedious one, so I was hoping there would be a better way. What I am trying to do is cross compile the PPPD program so that I can install it on an embedded system (this system does not have make/gcc on it). It was easy to cross compile it, but I can not run "make install" since I'm compiling on a secondary machine. I don't want to install PPPD on this secondary machine (I couldn't anyway, because it was compiled for a different architecture) and I can't run make install on the target machine because there is no make/build system for it.
So it seems like what I would have to do is to manually copy over each compiled file from the build machine to the appropriate location of the target machine. And the only way (that I know of) to figure out how to do this is to manually examine the Makefiles (yes, there are several for PPPD) and figure out which file should go where on the target system. This isn't trivial because it uses a hierarchy of makefiles and the probability of human error for this method is high.
Is it possible that I could run another command that would give me a list of all the commands that make install would perform? Or a list of all files and their target location for "make install"? Or possibly some other solution that I am completely unaware of that would make this task not so painful and error prone?
I`m trying to install Intel EXPI9402PT PRO/1000 PT Dual Port Server Adapter on my machine. I download the drivers for this card from intel web page, but I can`t make it work. I`m running OpenSuse 11.3 version. When I tried to install it for the first time I got this message:
Makefile:71: *** Kernel header files not in any of the expected locations.
Makefile:72: *** Install the appropriate kernel development package, e.g.
Makefile:73: *** kernel-devel, for building kernel modules and try again. Stop
Then I install the kernel-source package and I got this one:
Makefile:107: *** Linux kernel source not configured - missing version header file. Stop.
I also installed kernel-devel package, but I get the same message.
I need to use wget (or curl or aget etc) to download a file to two different download destinations by downloading it in two halves:
First: 0 to 490000 bytes of file
Second: 490001 to 1000000 bytes of file.
I will be downloading this to separate download destinations and will merge them back to speed up the download. The file is really large and my ISP is really slow, so I need to get help from friends to download this in parts (actually in multiple parts)
The question below is similar but not the same as my need: How to download parts of same file from different sources with curl/wget?
aget
aget seems to download in parts but I have no way of controlling precisely which part (either in percentage or in bytes) that I wish to download.
Extra Info
Just to be clear I do not wish to download from multiple locations, I want to download to multiple locations. I also do not want to download multiple files (it is just a single file). I want to download parts of the same file, and I want to specify the parts that I need to download.
I have noticed that the files and folders search in Unity, only shows up those files which have been amended (or possibly just opened) since the install.
i was wondering if there was a way i could have the search index (or something vaguely equivalent) all the files on my machine. This is especially important given that i reinstall the OS every six months on a new distribution cycle, copying all my old files across.
Without being able to see my old files the search is pretty much reduced to a recent history search.
i have a problem, i share my files but nobody can access my file. what can i do?
View 1 Replies View Relateda friend of mines laptop died a few weeks ago and i said i would extract data off the drive for her... did this with dd and created a .image file. I have this image mounted so it is browseable, and we can copy files from it however i am unable to delete files from it?
You'd think it was not a big deal... but i'm running out of space!! and the .image is 90 odd gb. I know i "could" just get the disk and copy the files off she wants... but that would be too easy
I'm after a WebGUI file manager which runs on another port rather than port 80 (already have a Apache installed)
But i want to be able to access and edit files from the web, rather using FTP client etc..
Is there any way, either with something included or with a program that can be set up to search for files in Ubuntu? I need something like the search for files or folders that was available in Windoze 98 and 2000. I have tried the built in search under "places" and I have found no way to get it to search a full drive or all drives.
View 5 Replies View RelatedI have file which consists of many files with their path,i need to check for the file exists in the given path,how to check?
View 12 Replies View RelatedI'm trying to setup a Samba share for our work. I have it almost complete, however I can't successfully share editable files between users. The issue I'm having is that say User1 create a file test.txt, because of the 755 permissions, then User2, who has "writable" rights as per the smb.conf file, cannot edit that test.txt file.
Whevener I create a file with a user, its locked by that user. Is there a way I can set it that every folder/file a user creates is 777 ? I firgured that there's still security because of the "Valid users = " field in the smb.conf file.
I have a remote VPS with 9.10 installed and would like to host some files on it. I'd like to be able to download the files from a browser using a login name and password.
View 2 Replies View Relatedfind a file or content by name recursively similar to the ms-windows function search with Linux? I can do find . | grep test.html suspecting it's not the best.
For instance, running find . | grep terms.htmlgives my expected result while locate terms.html doesn't even though locate gets updated db - it might have to do with that it's an USB stick the file is on?
Recently one of the worm is spread in our network & so many unwated files are getting copied on our ubuntu file server like comment.htt, desktop.ini, winfile.exe Now we have clean that worm from our network but few files are remained on ubuntu server as well as in backup folders and i want to search those files and delete it.
View 1 Replies View RelatedI need the ability to search for file content in documents and spreadsheets and I need to be able to do this from the folder level.When I hover my mouse over the "search" button in the file browser toolbar, it says that it can "locate documents and folders on this computer by name or content," but that is not the case. It can only locate documents and folders by name. Is there something I need to download that will allow me to do this? I have nautilus file manager.
View 9 Replies View RelatedI recently used scalpel to recover .doc files. I only need to find just one file, but scalpel retrieved thousands and thousands of them, all titled after a sequence of numbers. If I could only search within them all for a single word I'd be able to identify the ones to check out vs. the duds immediately.
View 6 Replies View Related
