Ubuntu Servers :: Webserver On OpenVPN Client (visible To Internet)
Apr 19, 2010
I'm trying to run Web server (nginx, does not really matter) "behind" VPN tunnel (i.e., on VPN client - the idea is that Web server is available at VPN endpoint IP on VPN server). Stock Ubuntu 9.10 Server with stock openvpn 2.1. No network changes done, only ufw is enabled and IPv6 is switched off. I need this box to be available at main IP address, no default route for VPN tunnel.
Tunnel itself works nicely, no problems at all. Hand-made static routes work via tunnel just fine. Problem is in-going traffic - I can see that it at least comes via tunnel (via OpenVPN debug), but is blocked (or dropped) by firewall or kernel. As far as I know, specific VPN server does not filter anything and is used for running Web servers on other IPs. I think I might need to set up some sort of IP forwarding for tap0 device to localhost - but don't really know where to start.
Tried disabling firewall, making Web server listen on all IPs (from localhost to VPN tunnel) - no luck. The box is in another country and KVM will be time and money, so I really don't feel like experimenting. openvpn.conf (IPs are obscured, non-relevant options removed, based on recommended config for that server):
Code:
# Setup
dev tap
remote 1.2.3.4
port 5091
[code]....
View 5 Replies
ADVERTISEMENT
May 2, 2010
I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
View 5 Replies
View Related
Jun 25, 2010
I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
View 6 Replies
View Related
Jan 23, 2011
This is my first attempt at a server, and I running Ubuntu 10.04 server. I had to reconfigure my network, so now I am attempting to use it as a server. I have a Linksys WRT54G2 connecting various machines-- Windows XP, Ubuntu builds, and LinuxMint 10 Julia.
The long and the short of it is that the server connects to the Internet-- I can get updates and install programs via terminal. The server also connects to the router, as tested by pings. The client computers all ping back and forth nicely, and I can access the file share via FTP from the local side and externally (this is part of a larger network).
How can I get it so that my client computers can access the Internet through the router and server?
View 3 Replies
View Related
Jul 19, 2011
I am back to the same issue internet connection sharing using NAT .I use the following command it work for me for an hours.
Code:
sudo iptables -A FORWARD -o eth0 -i eth1 -s 192.168.0.0/24 -m conntrack --ctstate NEW -j ACCEPT sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE
Code:
sudo iptables-save | sudo tee /etc/iptables.sav
Edit /etc/rc.local and add the following lines before the "exit 0" line:
Code:
iptables-restore < /etc/iptables.sav
Code:
sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
After restarting my server NAT is not working .client system can ping to my server through the server's eth1 ip but Internet is not accessible to the client pcs.
View 2 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
Oct 1, 2010
I am trying to connect to an existing VPN server that I have been using for years now. I am moving my develpment environment over to a Ubuntu box and I must have openvpn working in order to access SVN. It has been a few years since I have been setting up linux boxes. And networking is a soft spot for me. But
The server has been running without problem for a LONG time. A windows computer I have been using connects to it fine and I can access the network on this machine. I am setting up a new computer, but when trying to connect openvpn starts the initialization sequence completes but I cannot ping the network I am trying to connect to.
I use a second VPN connection to connect to an alternative network and it works fine. The difference between these two is that the working vpn connection is a routed IP tunnel and the one that is not working is a bridged connection.
The VPN that is working on this box brings up tun0 while the bridged connection connects but does not bring up a network tun device. The server logs look normal, it just looks like the client is not setting itself up to use the network once connected. (The key/cert pair work find when on a windows box) Just not on this new ubuntu build.
My current client config
Quote:
cert eric@home.crt
key eric@home.key
client
dev tap
[Code]....
The server is using tap, as well as the working windows client uses "dev tap"
It has been a long time since I have been maintaining linux boxes but its coming back slowly.
Do I have to bring a device up manually ?
View 6 Replies
View Related
Apr 21, 2010
I have a virtual private server running ubuntu server edition that I have set up as an openvpn client. The problem I have is that the moment I turn on openvpn, I am no longer able to ssh into the machine. Is there a way to enable me to connect to it even when it is tunneling?
View 4 Replies
View Related
Oct 26, 2010
I have an Ubuntu server that is currently running Ubuntu 8.10. I was thinking of making it a VPN server for my iPhone and also for my laptop whenever I'm outside and need to access internet over insecure wireless networks. Now that part should be easy I found several guides on how to configure OpenVPN server, as well as enabling clients on iPhone, and OSX.
However, the things is that my server is currently a OpenVPN client also, I have a paid tunnel set up to bypass my ISP blocking incoming traffic on various ports. Is it possible to keep this setting but still enabling a VPN server? Essentially causing traffic from my external device to go in through my tunnel to the VPN server, and then out through the external VPN provider.
View 2 Replies
View Related
Sep 15, 2009
This is the first one of probably many posts as I am new to Fedora having lots of questions. This one is about the openvpn client which is used by me to connect to my company network. Thanks to the Fedora FAQ it was easy for me to set up the client and establish a connection. There is just one problem every time I open a connection I am disconnected from my local Internet. I was using openvpn on my Windows XP PC before and there was no problem keeping two Network connections, the (W)LAN and the vpn tunnel. Does anyone know how to solve this? I am utilizing the latest Fedora 11 release and configured openvpn client via the Network Manager GUI.
View 2 Replies
View Related
Mar 3, 2010
I have a ubuntu 9.10 box that is acting as my firewall. ETH0 is connected to a cable router and my eth1 nats out it. I have br0 bridged to eth1 (private). I am able to ping from my openvpn client into my network but not from a boxon my local network to the openvpn client I watched the firewall and nothing is being blocked on any device. I checked the arp table on my firewall and it does not know about my vpn clients. Any idea's why my vpn clients are not adding themselves to the arp table?
View 2 Replies
View Related
Feb 4, 2010
Running Linux Fedora 10 on an Intel Core 2 Duo PC. Runs great. We are trying establish VPN between a client and server on the same LAN. The network is a standard fast ethernet, run great. We are trying to install OpenVPN server, but having a little difficulty. Key and certificate builds seem to execute without a problem. But when we try to start the service we get [FAILED]. I've attached a copy of our procedure.
View 1 Replies
View Related
Feb 9, 2011
I have set up my Openvpn Server in Centos and it is working fine. Windows XP clients are able to connect the OpenVPN Server and access the network. This is a customized OpenVPN Gui Client. Now I need the customized OpenVPN Client for MS Windows 7Bit. I am using openvpn-2.1.4-install OpenVPN Client in MS Windows 7 64Bit. This is a executable and working fine in the said architecture. Now I want to compile this version. I am following the given steps at : [URL].. As per the direction i have copied the source from 2.1.4 and tried to compile, but compiled copy is giving the error " An error occurred Installing the TAP-Win32 Device Driver". I have tried this compilation by making every change and hack but all in vain.
I think that there are some certain steps which are missing and not documented any where. And sure that someone in forum will know the facts.
View 1 Replies
View Related
Mar 9, 2010
I'm using openvpn-2.0.9 with gui-1.0.3 which is set up on windows xp machines(for server and clients) when i set up the server and one client it connects well and i can work without a problem. but when the second client connects it gets the same ip address of the client1, so that both clients can't work at once.
my server and client config files are as follows.
server-configuration file
client1-configuration file
client2-configuration file
I've tried by changing many settings such as server-bridge and all but couldn't find a solution for the problem.
By the way when connected server gets 10.8.0.1/30 and every clients get same ip as 10.8.0.6/30
View 2 Replies
View Related
Jan 9, 2010
I have openvpn server configured with bridged interface on my openwrt router. The client is running ubuntu 9.10 with config:
Client
dev tap
proto udp
remote x.x.x.x 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca /home/blwegrzyn/openvpn/ca.crt
cert /home/blwegrzyn/openvpn/client1.crt
key /home/blwegrzyn/openvpn/client1.key
comp-lzo
verb 5
(x.x.x.x was hidden)
When the client connects the log says:
WRRRWRSat Jan 9 20:16:03 2010 us=332404 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 192.168.1.241,route-gateway 192.168.1.254,ping 10,ping-restart 120' .....
Sat Jan 9 20:16:03 2010 us=343906 ERROR: Linux route add command failed: external program exited with error status: 7
The server is trying to push default gateway 192.168.1.254 to the client and the client is on 192.168.2.0 network as you can see the route addition fails with SIOCADDRT: No such process. This is because the tap interface does not have any ip and the route addition is not possible. The tap interface is not getting the dhcp address through the tunnel, not sure why (this works on XP). To fix the problem I must manually add the ip to the tap interface, and the default gateway, but then i must add dhcp server to resolv.conf to make it work and once I disconnect the computer does not know the old valid dhcp anymore and cannot communicate. Why openvpn cannot get the ip automatically? Why it cannot grab the dhcp from the tunnel? Is it related to the wireless card being managed by the network manager? This works perfect on windows machine (xp sp3).
View 3 Replies
View Related
Jan 26, 2010
I'm using OpenVPN 2.1 on Ubuntu 8.10 to connect to LAN behind an IPCOP server. Everything works fine except when I move across the tunnel files which are over 180kb, then I get UDPv4 []: No buffer space available (code=105 surfing the Internet I've found post that suggest to increase these settings on the kernel
> sysctl -w net.core.rmem-max=8388608
> sysctl -w net.core.wmem-max=8388608
> sysctl -w net.core.rmem-default=65536
> sysctl -w net.core.wmem-default=65536
those have actually made a small difference, but not enough for uploading even an image over http. I guess that I can keep increasing those values till I'm not satisfied, but as I'm not sure on what I am dealing with, can anyone tell me if there's a rule of thumb? My machine is a laptop with a dual core processor and 2GB ram.
View 1 Replies
View Related
Mar 11, 2010
is there any tools that I can use to get bandwidth speed info between OpenVPN AS and its client?
View 3 Replies
View Related
May 10, 2011
I already search in google doc about installation openvpn. Not all I got complete tutorial. When client connect to server, they got a few error.
Code:
Mon May 09 18:01:57 2011 us=774000 Re-using SSL/TLS context
Mon May 09 18:01:57 2011 us=774000 LZO compression initialized
Mon May 09 18:01:57 2011 us=774000 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon May 09 18:01:57 2011 us=774000 Socket Buffers: R=[8192->8192] S=[8192->8192]
Mon May 09 18:01:57 2011 us=790000 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Mon May 09 18:01:57 2011 us=790000 Local Options String: 'V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-client' .....
View 1 Replies
View Related
Jan 19, 2011
I can get a tunnel connected via terminal with: openvpn --config client.ovpn
However, when I tried to use the "friedly" gui (gadmin-openvpn-client), it keeps telling me to "import server certificates into client first."
I don't know what that means. Nor, do I see a tun device.
View 2 Replies
View Related
Mar 20, 2011
I want to configuring openvpn-2.1.4 on linux redhat as client server using key, but there is some drawback
[Code]...
View 1 Replies
View Related
Mar 31, 2011
I am using squid3 on ubuntu server 10.10, publish my webserver running on other machine on ubuntu10.10 desktop. My server is configured for squid3 transparent proxy which is running successfully.
Now I need to publish my other machine which is running with apache2 webserver.The local IP is 192.168.1.5, I need to assign a public IP as 61.8.153.212 provided by ISP.
use my webserver machine outside the LAN using internet, through ubuntu server 10.10 squid3.
View 3 Replies
View Related
Sep 26, 2009
I'm using Fedora Core 11 and the client OpenVPN on the network-manager into a segmented infrastructure. It works well.
My laptop is on a dmz wireless Zone 192.168.3.0/24 and access Internet through a firewall via a front-end zone 192.168.65.0/24 with wlan0 interface.
But my laptop can access on a back-end zone 192.168.2.0.24 to a server.
When I start the OpenVPN tunnel, I cannot access on my back-end zone because the kernel routing table is modified (all the traffic is routed through the tun vpn interface)
If I define a static route like route add -host 192.168.2.x gw 192.168.3.2 where x is my file serveur, I cannot connect to this server because the routing is make through the tun interface and not by the wlan0 who can access on is gateway
I want to know where changing the kernel routing table file to access on the Internet and on my back-end zone in a same time.
View 4 Replies
View Related
Nov 24, 2010
How to login multiple client pc on the same network using via openvpn server from client side
View 1 Replies
View Related
Jun 23, 2010
My network is barely functional. I'm running 2 linux servers connected by openvpn (tun) through routers on both sides. There are Windows clients (98 and XP) on both subnets. One server (ls3) acting as PDC for the domain. The Windows clients use the respective linux boxes as gateways. On the server side (ls3 which is both openvpn server and samba server), all the clients can read/write properly to shares on both sides. The problems are all on the client side. Share connections to the server side disconnect after a few moments.
Browsing on the client side windows machines is fine. I can see shares on the server side. Some server side files open and are readable, writable, other server side files will not open. Some samba logon scripts on the server side can be opened from the client side. Others open after a long wait to a blank file! Permissions on server side files are set to 777 for testing. If a file won't open or reads "blank", that doesn't change no matter how many times you try. A non-readable/writable file overwritten by a readable/writable one can be read and written to!
I can ping successfully from any client on either side to any other client by either ip address or workstation name. Firewalls on both side are set to forward tcp and udp traffic going to port 1194 to the respective gateway linux boxes. Iptables on both linux gateways are down for testing. I tried reversing the openvpn server/client roles with the same result; the same physical side of the network had the problem. On one of the windows 98 clients, I wiped out the networking configuration completely and rebuilt it from scratch. Same result.
One one of the windows xp clients, I tried to rejoin the domain. It went through successfully but the result was the same as above. The network was operating smoothly for several years until the client side dsl modem broke last week. It was replaced with a newer model and at the same time I migrated from a pptp connection to openvpn. How to resolve this, Is this something to do with openvpn? Is this a network hardware problem? Am I missing something in the port forwarding on the routers? My smb.conf files are ancient except I added interface tun0. I have never seen 2 files sitting next to each other in the same directory where one opens and the other doesn't!
I'm running Mandrake 9.2 on the client side and Mandriva 2008 on the server side. I have a Sonicwall firewall on the server side, a Westell 7500 on the client side. I note that during the modem install, the http port was opened to the linux box on the client side and the access log got huge over the weekend and I ran out of disk space until I closed it down and deleted the log. I tried a simple test while viewing /var/log/daemons/errors on the client side. From a windows workstation in the client subnet, I opened a dos window and tried to print a file located on the samba server on the openvpn server machine which I knew NOT to be problematic.
The file printed and there were no errors reported in the log. I repeated the test with a known problematic file. The file would not print. The errors log noted:
Authenticate/Decrypt packet error: packet HMAC authentication failed
I regenerated the static.key file on the server side and scp'd it to the client side and restarted both openvpn's. I checked for duplicate files named static.key on both sides. Same error.
View 1 Replies
View Related
Mar 20, 2009
Code...
What I can ping
Host A -> Host B
Host B -> Host A
Host A -> Router B
Host B -> Router A
Host A -> OpenVPN B
Host B -> OpenVPN A
VPN Server -> VPN Client
VPN Client -> VPN Server
What I can't ping
VPN Server to any client side host local address
VPN Client to any server side host local address
I have searched and searched for this but can not find any answers. Why can I not ping Host B from my OpenVPN server?
View 1 Replies
View Related
Mar 28, 2010
After I applied below iptables rule.. I am unable to ping the host in 172.16.1.0/24 from OpenVPN client
View 1 Replies
View Related
Sep 15, 2009
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
View 1 Replies
View Related
May 8, 2010
when i go to my server's IP address, the index.php files is downloaded, not run, how can I fix this? I have php5 installed and enabled.
Quote:
root@ubuntu:~$ ls /etc/apache2/mods-enabled/
alias.conf authz_user.load dir.load php5.load
alias.load autoindex.conf env.load reqtimeout.conf
auth_basic.load autoindex.load mime.conf reqtimeout.load
[Code]....
View 4 Replies
View Related
Oct 20, 2010
I posted this question a while ago but haven't had any luck getting it answered so I reworded everything to make it more clear. I started an Ubuntu web server on an old work laptop. The purpose of this server is to host a small file-sharing site, a forum, and a wiki. I have no prior experience with command line Ubuntu but am trying to figure this all out.
So far Ive setup the LAMP server, so apache, mysql, and php are installed. Ive also installed phpBB3 and Mediawiki. Both phpBB3 and Mediawiki are able to open from inside my LAN. I also have SSH setup and am able to use putty to manage the server from inside my LAN. Mediawiki runs slow internally but this is a secondary concern.
Externally to the LAN I can access the webserver using SSH(but sometimes it is too slow for anything that opens up such as nano or the SQL password prompt to display and the connection drops). I can also browse to the site and see the default apache welcome message. But I cannot open the mediawiki or phpbb site. Both will sit indefinitely and not open. The access log on the server shows that the request is being passed through though.
View 9 Replies
View Related
Nov 17, 2010
how to create an entire server from scratch using a minimal install. I know Ubuntu Server 10.04.1 comes with packages that can be included during install but for the sake of learning I only installed SSH access.
I was able to get Apache2, MySQL, PHP5 installed and running fine. What I'm trying to do next is setup DNS so I can point fragdata.com to my Ubuntu server and have other people see my test site.
I have registered the nameserver ns1.fragdata.com with my IP and updated DNS in my registrar. I followed the tutorial but "dig fragdata.com" gives me the following:
Code:
root@linux-server:/home/syvil# dig fragdata.com
; <<>> DiG 9.7.0-P1 <<>> fragdata.com
;; global options: +cmd
;; Got answer:
[Code]....
View 9 Replies
View Related
