Ubuntu Servers :: Courier IMAP/POP Without Postfix?

May 10, 2010

I have installed qmail on my 10.04 server (Because I prefer qmail and dont want to use postfix) and I would like to just install courier IMAP/POP server without the Postfix (Or other mail servers).

Is there an apt-get install switch that will install just what I want to install without deps; or at least a way to block unwanted deps from being installed.

View 3 Replies


ADVERTISEMENT

Ubuntu Servers :: Setup Postfix Mail Server And Courier-imap/pop

Feb 23, 2010

Setup my postfix mail server and courier-imap/pop. My postfix server now is working with tls and saslauthd, I can send/receive email inside my domain as well as outside. However, I need two separate smtp and imap/pop3 server, I mean two machine - one with smtp function and one with imap/pop3 function working together.

View 4 Replies View Related

Software :: Courier IMAP Functionality - Delete W/o Marking - Similar To Gmail IMAP ?

Apr 23, 2010

I've been running Courier IMAP for many years now, but when I added gmail's IMAP to my Outlook I noticed something interesting: when you delete a message, it gets thrown into the trash instantly.

With Courier IMAP (or any other IMAP server, for that matter), when you delete, it first marks it for deletion. Then after you Purge Deleted Messages it either gets rid of them or moves them to trash.

Is there a way to implement this in Courier IMAP?

View 1 Replies View Related

Ubuntu Servers :: Postfix / Courier And Squirrelmail Configuration

Aug 13, 2010

I have setup a postfix + courier + squirrelmail email configuration. I can get to the squirrelmail login page and run its test and it said everything was fine. After that I am stuck. What is the username and password or if it is not created, how do I create it?

View 3 Replies View Related

Ubuntu Servers :: Courier - Postfix - ClamAV - Spamassassin And Amavis Setup

May 4, 2010

I am currently running Ubuntu Server 9.10 and followed this HOWTO on setting up my email server.

[url]

Everything seems to work correctly. If I look in the Maildir the emails I send to test are there.

The problem is when I try to sync my email via IMAP from my windows box (on a different network) it doesn't show any of my email nor does it deliver new email. My email app doesn't give any errors nor does the logs on the server.

How can I get it so my email syncs to windows computer? I am sure it is something really small that I am over looking but I can't seem to find it anywhere. I don't know if you need to see any of my config files but I can post them if needed.

View 5 Replies View Related

Server :: Courier Or Dovecot For IMAP?

Mar 18, 2011

Does anyone know if there are only personal preferences between the two IMAP servers or does one of a slight advantage over the other? I've used Dovecot only in the past but my package manager loads tons of MySQL libraries with Dovecot which is a problem since that's not authorized on my server right now. I can either install it from source or try another application like Courier.

View 4 Replies View Related

CentOS 5 Server :: Courier IMAP Won't Compile To RPM

Dec 19, 2009

how to install Courier IMAP server and they all say the same thing, but they keep giving me problems.URL... is a link to the page I'm working on.I created the user, edited sudoers manually since I can't effectivly use visudo in the terminal since I don't know how to save. I also made sure that I restarted after I edited it in order to make sure it took effect. I used su compileuser and just logging in as compileuser and opening a terminal. After I made the user and edited that file, I created the directory mentioned and ran the command to create .rpmmacros. After that I got to work on wgetting the files and installing them and what not. The first one compiled and installed and so did the last one. The command "rpmbuild -ta courier-imap4.6.0.tar bz2" would not go though properly. This one I need to run as a non-root user and I've tried using every way possible to be as distant from root as possible, but it still gives me this at the end.

View 3 Replies View Related

Server :: Courier - No Such File Or Directory When Testing IMAP And POP

Jul 28, 2010

Using the following software:
Ubuntu Server 8.04
SquirrelMail 1.4.13
Postfix 2.5.1
Courier 0.59.0 (Courier-IMAP 4.3.1)
Apache2 2.2.8

I've installed a mail server per the instructions at [url].

Neither POP nor IMAP test successfully with the user that I just added after following the setup instructions.

This doesn't make any sense. I added the user to the mysql database:

Code:

And after I did that, I ran the postfix reload command. If I try to log in as firstuser@mydomain.com, which is the user I created during the setup and configuration process, it works fine.

I checked the virtual mail account's home folder, and under the mydomain.com folder, I only see a folder for firstuser. I'd create one for testuser manually, but I don't know if that'll work since it seems to contain a particular folder structure of its own.

Is there some other command that I have to run? I don't recall having to do anything additional when setting up firstuser.

View 5 Replies View Related

CentOS 5 Server :: Adding Authentication Modules To Courier-imap?

Jun 4, 2011

I am administrating a server with CentOS installed. It came with qmail and courier-imap preinstalled, and Plesk.I need to manually add email accounts outside of Plesk, because my 1-domain Plesk license only allows the creation of one email address (yes, it sucks).

When I say add email account I mean creating a new email address, have email for that address be stored in its maildir, and have a corresponding imap (and hipefully also pop3) account that will be able to read that mail. All this with virtual domains.I've already found out how to create the new email addresses for qmail, so that email for the new email address is being delivered correctly. Now I need to create the imap/pop3 accounts for courier.

For the qmail part, I create a folder in in /var/qmail/mailnames/virtualdomain.org/username and a maildir called Maildir inside it. This is how the first mail address was created by Plesk and i'd like to maintain the same structure. As I've said, the qmail part is already working, I need to get the courier-imap part to work. Ideally, it should accept login with both short (i.e. myuser) and long (i.e. myuser@virtualdomain.org) user names.

Currently the only authentication module that is enabled in courier-imap is authpsa, which is Plesk's authentication module.in order to add more authentication modules, do I just need to add them to the authentication module list in /etc/courierimap/imapd, or do I need to reinstall courier-imap with support for such authentication modules? I thought I would only need to add them to the list, but I've noticed that the /usr/lib/courier-imap/authlib/ folder only contains a binary called "authpsa". Does that mean that other authentication modules are not even installed? If so, can I install them without reinstalling courier?

The second question is, what would be the most recommended authentication module that would make it easiest to create new email addresses/accounts from the command line? I need to be able to write a shell scripts capable of creating a new email address with all that is needed, and I'd like to keep this script as simple as possible, so for example I'd avoid mysql-based authentication as it sounds rather complicated. And the last question is, if I do need to reinstall courier-imap, how can I install a package without recompiling it? Will my one existing mailbox keep working?

View 1 Replies View Related

Fedora :: Error - Courier-imap Standard Output: Broken Pipe

Jul 22, 2010

I'm following the "The Perfect Server - Fedora12 x86_64 [ISPConfig 3]" instructions and I am encountering an error when trying to build the rpm for courier-imap (from page 4 of the HOWTO).

The command I run is:

Code:

rpmbuild -ta courier-imap-4.6.0.tar.bz2

The error is below:

Code:

INFO: LOGIN, user=confmdtest, ip=[127.0.0.1], port=[0], protocol=SMAP1
INFO: LOGOUT, user=confmdtest, ip=[127.0.0.1], headers=0, body=0, rcvd=26, sent=610, time=0
sort: fflush failed: standard output: Broken pipe

[code]....

RPM build errors: Bad exit status from /var/tmp/rpm-tmp.85697 (%build)

View 3 Replies View Related

Ubuntu Servers :: IMAP And Method To Sync Calendars On IMAP With Both Thunderbird / Lightning Blackberry

Mar 1, 2010

I'm looking for a method to sync my calendars on my IMAP server with both my Thunderbird/Lightning any my Blackberry. I found "IMAP Calendar Proxy" here recently, but it has been inactive for 5 years. I've seen people suggesting the use of services like Plaxo and such, but I don't like the idea of a third party messing with my calendars and contacts. Also, I've had to remove several viruses from computers with Plaxo, and I'm not sure if it in itself is a virus or not..... It certainly is a thorn in my side as is. This is for my personal IMAP server, so I'd prefer a free solution even if it is more difficult to install than a paid version. I mainly need it to just sync my calendar to my Blackberry and Thunderbird and couldn't care less about the contacts.

I've been Googling for things for quite some time now, and haven't really found anything that says that it will work with Blackberry and Thunderbird. They really only give a sense of maybe with nothing really defined. I can put on an Ubuntu server to sync everything? I don't want to leave my computer on all the time, and RIM has yet to come out with something decent to sync Blackberries and Thunderbird properly as far as I know.

View 5 Replies View Related

General :: Postfix Courier Amavis - Can Recieve But Not Send

Sep 24, 2010

I can send emails to local accounts but not out to the world. Here are the refrences I used to set things up.

[URL]

I was able to send and receive after the "basic" setup. I added amavis-new and I am pretty sure that it stopped working then. (late nights, lots of changes/tries not 100% sure any more) Went back to basics trying to send a test email from telnet (on the server).

Code:

mail:~# telnet mail.my-server.com 25
Trying 216.240.35.89...
Connected to mail.my-server.com.

[code]....

View 3 Replies View Related

Server :: Postfix + Courier + Squirrelmail Tutorial - Can't Get Into Mailbox

Jan 1, 2010

i followed this tutorial to the "T", [URL]. I am not able to login to the mailboxes with squirrelmail, it says "connection dropped by imap server" I used the whole address as a login just like it said to do. I can sucessfully authenticate with outlook express but it throws an error that say's [URL], no such file or directory. i can telnet into it remotely but when i type ehlo [URL] it just keeps showing all the 250 lines and wont let me generate a message.

from what i saw on the comments on the tutorial and googling there are many other people with this problem, however i found no solutions. This is fresh work and i have not touched any config files since finishing the tutorial

View 1 Replies View Related

Server :: Qmail With Courier IMAP Server - Can't Receive Mails

Aug 25, 2010

I setup a qmail on a Debian 5 Lenny server with courier-imap server. I can send mails but cannot receive mails. I altered /etc/init.d/qmail as follows.

Code:

View 3 Replies View Related

CentOS 5 Server :: Mailqueue Filling Up - Postfix/Courier/Spamassassin

Feb 2, 2010

In the last week email delivery had slowed down to taking approximately 24 hours and investigation has revealed that there were 45000 emails in the mailqueue. I flushed the mailqueue yesterday but mail delivery is slowing down again because emails are again being queued by the thousand.

The mails are mainly spam sent to ficticious users at a genuine domain hosted on the server.

My setup is running Courier IMAP with Postfix, Spassassin is installed along with Amavisd-new but I just don't understand why this has suddenly become a problem based on my setup not having changed for the last 6 months.

Should these spam emails be being discarded by spamassassin before reaching the mail queue? Are my discard score settings too high (6.9)?

View 3 Replies View Related

Ubuntu Servers :: Postfix Make Install - Error - Postfix: Fatal: Chdir(/usr/libexec/postfix): No Such File Or Directory

Mar 11, 2010

Here is what i do: make clean make makefiles CCARGS='-DEF_CONFIG_DIR="/opt/product/postfix-2.6.5/etc"

-DEF_COMMAND_DIR="/opt/product/postfix-2.6.5"
-DEF_DAEMON_DIR="/opt/product/postfix-2.6.5/libexec"
-DEF_MAILQ_PATH="/opt/product/postfix-2.6.5/bin/mailq"
-DEF_DATA_DIR="/opt/product/postfix-2.6.5/lib"
-DEF_NEWALIAS_DIR="/opt/product/postfix-2.6.5/bin/newaliases"
[Code]...

make install then i got this error: postfix: fatal: chdir(/usr/libexec/postfix): No such file or directory make: *** [install] Error 1 I don't understand why it's checking the usr/libexec folder for the daemons although I've set the folder to /opt/product/postfix-2.6.5/libexec in the makefile. Here is also the cat of my makedefs.out:

[Code]....

View 1 Replies View Related

Server :: POSTFIX Without IMAP/POP3?

Jul 25, 2011

I have installed Postfix with LDAP, Dovecot IMAP/POP3 Server on RHEL 5.5whether Postfix without IMAP/POP3 server is possible??

View 5 Replies View Related

Software :: Setup A Mail Server - Virtual Users With Postfix - PostfixAdmin - Courier - Mailscanner - ClamAV On CentOS 5.5

Dec 26, 2010

I am trying to set up a Mail Server -- Virtual Users with Postfix, PostfixAdmin, Courier, Mailscanner, ClamAV On CentOS 5.5 using this guide. These are the version and softwares I have used till now:-

[Code]....

View 4 Replies View Related

Software :: Postfix - Delivers Mail To Unix Mailbox But Not IMAP?

Dec 22, 2010

I setup a postfix mail server. Tested it to make sure it was secure and all seemed good.I sent some test messages and see from the logs that mail is being delivered to the recipient. its only delivering mail to my user's local mbox on the linux server. IMAP appears to have its own mailbox and the two boxes are no linked. I was thinking it was an alias issue however I did at one point have the mailboxes to be the same.... now they are different... Here is the config file.... (I changed the domain names for privacy).

command_directory = /usr/sbin
daemon_directory = /usr/libexec/postfix
data_directory = /var/lib/postfix

[code]....

View 2 Replies View Related

CentOS 5 :: Postfix + Procmail - Pop And Imap Ports Blocked By Firewall

Jul 11, 2009

Small server running 5.3 - stock postfix configured to use Maildir. Dovecot configured but both pop and imap ports blocked by firewall. Access to mail is via Squirrelmail via https. Configured to virus scan via ClamAV. Works just fine. Now I want to add procmail filtering. So I create these two files - ~/.forward and ~/.procmailrc in my user home dir: "|exec /usr/bin/procmail -f- || exit 75 #mpeters"

View 1 Replies View Related

General :: Setup A Functioning Imap And Pop3 Mail Server Using Dovecot-postfix?

May 4, 2010

I'm somewhat familiar with Linux and became pretty decent at installing and configuring packages in Ubuntu. One of the things I was able to do with my tinkering was set up a functioning imap and pop3 mail server using dovecot-postfix. Now I'm experimenting with Slackware to get the feel of another distro, and I noticed that the mail server packages were already installed. On my client computer they can pick up that I have users configured and my mx record is working.

However it is failing to send mail saying that it is failing to relay the e-mail message and that the server responded 5.7.1 which was a problem that I was having in Ubuntu when first configuring the mail server. The fix was to edit the postfix.conf file and adding the localhost name of my server. Does anybody know of the file that I need to edit to make it possible to relay my messages with both pop3 and imap.

View 1 Replies View Related

Server :: Mail Server - POSTFIX - COURIER INSTALLED

Apr 7, 2011

I'm trying to get my server back up to snuff. I'm using Debian Squeeze right now and I'm up and atom with apache, mysql, php, pureftpd, ssh, and I have squirrelmail installed.

My dilemma comes with the mail part of the whole ordeal, Postfix and Courier are installed, have their keys made, and for what I assume, are configured correctly. HOW do I make new virtual users? My domain points to this machine as well as my MX record for mail.mydomain.com.

I need IMAP and POP working. And upon the creation of new email users, will SquirrelMail interface with Postfix and Courier? When I installed SM I set it up for use with Courier.

View 1 Replies View Related

Ubuntu Servers :: Courier POP3 Login Failed With MYSQL?

Nov 25, 2010

I have so far: installed and configured postfix, installed courier, installed MySQL and SASL. mostly following a guide on [URL]

When I want to login via POP3 with a user from the MySQL database, authentication fails.

The mail.log file contains the followiung error:
Nov 25 18:47:55 asmahan pop3d: Disconnected, ip=[::ffff:10.11.39.33]
Nov 25 18:48:05 asmahan pop3d: Connection, ip=[::ffff:10.11.39.33]
Nov 25 18:48:16 asmahan pop3d: LOGIN FAILED, user=john, ip=[::ffff:10.11.39.33]

The problem only occurs when I try to login via POP3. I can send emails via SMTP using the same account without any problems.

View 1 Replies View Related

Fedora Servers :: Can't (su - Vmail) Permission Denied [Courier Set Up]?

Jan 13, 2011

I was setting up a Postfix email server, and I was following a basic tutorial here. I successfully installed all the required packaged, and then set up a Virtual user for the mailbox, and Set up a new user with this.

Code:
groupadd -g 5000 vmail
useradd -g vmail -u 5000 vmail -d /home/vmail -m

[code]....

View 1 Replies View Related

Server :: Configure Mail With Postfix & Cyrus-imap - Cannot Send Mail Through Command Line

Nov 19, 2010

I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.

[Code]....

View 9 Replies View Related

Ubuntu Servers :: Adding IMAP Support To PHP?

Jul 25, 2011

I'm testing a support ticketing system (osTicket), and am trying to set up the server so it can send and receive messages using an external email account so it will, you know, work.When you try to add an email account, it spits out the error "IMAP doesn't exist. PHP must be compiled with IMAP enabled." in the web interface.So apparently IMAP isn't enabled in PHP. And apparently I have to recompile PHP to add that particular function. Um... how i do that? i not so good with computer

View 1 Replies View Related

Ubuntu Servers :: Roundcube Cannot Connect To Imap - Dovecot

Jul 20, 2010

I have a problem connecting my roundcube to my imap server.

So, here it is : I have a working imap server (dovecot), installed following the guide provided here [url]. I can successfully telnet it, or ssl it (from localhost or from another ip of my local network). I can even use my thunderbird from another local computer. Well, for me it is working fine.

Then I installed roundcube (0.3.1-3) with synaptic, but I cannot connect to my localhost imap server.

I have set auth as plain ($rcmail_config['imap_auth_type'] = 'plain';)

Looking in my dovecot log, i see two different behaviour. One is when it seems correct, and roundcube log in imap server, but is disconnect immediately :

Second is when server is refusing the password :

I am working with a plain text passwd, with no encryption at all. Does roundcube encrypt the password I type before to sent it to imap ?

I cannot explain the first behaviour, when roundcube sometimes managed to connect but disconnect immediately. I manage ONE time to reach my mailboxes, but i don't know how, and this never happens again.

View 1 Replies View Related

Ubuntu Servers :: Postifix / IMAP Copy Of All Emails

Jul 1, 2011

I have a server running Ubuntu 10.04 + Postfix + Webmin and I need to be able to make a copy of every mail received or sent from every account before the owner of the account delete it.

View 2 Replies View Related

Ubuntu Servers :: Courier Mail 556 Address Unavailable - Cannot Recieve Mail ?

May 6, 2010

My courier server cannot recieve mail.

My freebsd installation has worked for quite some time w/o problems.

I'm using ubuntu as a replacement and have tried using the same settings from my previous server.

I keep getting the following error.

courieresmtpd:

View 1 Replies View Related

Ubuntu Servers :: Configure A POP3 / IMAP Proxy Server?

Jan 25, 2011

This is my first post to the forum

I've recently migrated my office PCs to ubuntu. My server doesn't server any big purpose but to provide Internet Connection to the rest of the nodes. Things were quite easier during the windows era using ICS.

Even in Ubuntu we were able to do it using the "shared network" option, simple & straight forward. But things got complicated only after installing "squid". Needless to say it brought in a lot of add ons as far as the http proxy serving is concerned & we are enjoying a better internet(http only) connectivity without any doubt. But we are not able to use our email clients, MS Outlook or Thunderbird

But to best of my knowledge squid strictly is a http proxy hence doesn't support handling requests on ports other than 80. (465 & 995 in my case)

Now I have two queries, 1. Can "Squid" really be used to do what I want here??? using iptables, port forwarding or any other mean
& 2. Can any one suggest a good pop3/imap proxy as good as squid is.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved