In Ubuntu 9.10 I can't get apache directive ServerTokens to work. My httpd.conf looks like below.
Code:
ServerName server.mydomain.com
ServerSignature Off
ServerTokens Prod
ServerName solved startup warnings, but ServerTokens doesn't take. Both Firebug and nmap reports "Apache/2.2.12 (Ubuntu)"
how to globally turn off indexes?
I have upgraded to 10.4 and and after try to install mac look in ubuntu.My screen start flickering, I found it this due to in system => preference => appearance => effect become no effect automatically (as each and every time I select extra effect)After some time.for changing this setting i need to turn off the computer and restart then after i can do it i.e. change effect to extra effect. Its done after following installation
[URL]
I have Solaris at my workplace. Currently Esm was configured.It's listing conflicting configurations against policy standards. Few of them are like usrid's/guid's of users are below 100 so I am planning to change it above 100. For eg. I have ops id for an operations team.If I change uid and group id of this particular user/group, do I have to just find files of that particular users/groups ownership and change it accordingly.Or else something elese I have to do. Will it affect any running applications owned by user/group whose ID I am going to change. Also there are few ids owned by applications whose secondary gid is 0, how do I proceed with those, as its very risky to change in prod environment.
View 1 Replies View Relatedi recently purchased an i7 laptop and really don't want 8 cores on my bar. i remember there being a file that controlled this but i believe it wasn't writeable.
View 4 Replies View RelatedI am trying to set up a lamp server and I would like to change the ServerTokens option from full to prod but when I open /etc/apache2/apache2.conf it's no where to be found. Has the option been moved somewhere else? Same with setting ServerSignature from on to off. I'm starting to wonder if I even have the right conf file.
View 1 Replies View RelatedIn my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
How to enable wooby effect (compiz desktop effect like ubuntu) in fedora 15.
View 1 Replies View Relatedi got driver and when i install driver and reboot computer I got just terminal and when I type startx I get error FLGRX and sam log file or something like that.
instruction i found here but some comands didn't worked openSUSE Lizards
what is the best way of changing DNS Domain name in ubuntu 8.10? My server has bind installed and I can configure dns by webmin. I've all the configuration files under /etc/bind/.[URL]..
View 4 Replies View RelatedI would like to change port number for a specific folder name on linux server like domain.com/folder_name:yyyy so people can access that folder with pre defined port number. is there a way that I can do that?
View 2 Replies View RelatedRight now my server is being used as a Minecraft server. I have a site hosted on it, but my ISP blocks port 80, so I'm the only one who is able to view the site. I want to be able to change the port the site is on so that anyone can view it. I've looked it up and apparently that is possible; however, I haven't found out how to do it. I've changed the ports.conf file in /etc/apache2 and the default file in /etc/apache2/sites-available, but it didn't work. All that did was take my site off of 80, but it did not put it on the new port I specified. What exactly do I have to change so that when I go to mysite:port, it loads my website?
EDIT: Also, just for extra information, the two ports I tried were 8080 and 81.
how can I change the document root from /var/www to another folder? I cannot find anything in the apache2.conf or httpd.conf.
View 2 Replies View RelatedI've just finished installing Ubuntu Server 10.4 onto my ASRock ION330. I don't have a spare monitor lying around, so I've plugged my TV into my machince via HDMI. This works, but the text is tiny. There are too many rows and columns of characters (or equivalently, the font is too small). When I try changing the TV resolution to a smaller size, it just cuts out the rest of the text. So from the command line, how do I make the text bigger?
View 8 Replies View RelatedI have succesfully set up authentication manually in Ubuntu so users can log on with Windows Active Directory accounts and have their network drives mapped automatically using pam_mount.
Please note due to the setup I can't make any changes to the Windows 2k3 server.
If a user wants their password reset I can change it to a generic password. When they next log on to a Windows computer with the generic password it will automatically ask them to change it to something else.
Is there anyway to get this to work with Ubuntu 10.10? At the moment when logging onto Ubuntu with an account that is in this state the message Please change your password appears, it then proceds to log on without prompting to change the password and natually it won't map the drives etc.
My ISP Blocks port 80 so I changed the port to 8081 after I do this and restart Apache and use my IP with :8081 after I get a page saying Not Found The requested URL /index.html was not found on this server. I get this same message if I use my real IP or the IP from my router. What can be causing this?
View 2 Replies View RelatedI am trying to change the datadir in my.cnf and try to point it to different location where my database are residing.I have the permission to write on this directory.
datadir = /home/glucose/mysql
#datadir = /var/lib/mysql
if I do ls on my database location.Here is the result
root@bilal-laptop:~# ls -la /home/glucose/mysql
total 20512
drwxr-xr-x 7 mysql mysql 4096 2010-02-09 16:30 .
[Code]....
Because of which I am not able to start mysql. I am not able to locate actual log file as well.I looked at few log files they don't seem to tell me anything.But I am not sure which one I should be looking at as there are quite a few related to mysql.
I have a headless 8.04 server with 2 USB drives attached. I'm trying to move everything off the 1.5TB drive onto a few 300GB drives (so I can then use LVM on the 1.5TB drive and move everything back onto LVs.)I check the drives using 'fdisk -l'. They show up as sdc1 and sdd1. I mount them and start a cp operation.When I run fdisk again, the drives are no longer sdc1 and sdd1. Now they are sde1 and sdf1 (and of course, they are no longer mounted.
What could be causing this and how do I fix it?I need to fix this ASAP because the 1.5 TB drive seems to be going bad. Every few seconds I hear a big "click" as though the head arms are smacking against a stop. (This is the 2nd brand new 1.5TB drive that has started doing this!)
how you change the default version of python in Lucid. Lucid comes packaged with 2.6 but we use 2.5 where I work. I didn't see much of anything on the web for this topic so figured I'd post something. If you are installing python2.5 on Lucid version 10.04 (comes package with 2.6 only)
View 1 Replies View RelatedI'm running Ubuntu Server 10.10 and noticed that every time I log into the server via ssh it gives details that i don't necessarily want it to show.
Code:
Linux zeus 2.6.35-22-generic-pae #33-Ubuntu SMP Sun Sep 19 22:14:14 UTC 2010 i686 GNU/Linux
Ubuntu 10.10
[code]....
I changed the default port under etc/apache2/ports.conf and now I cannot connect to my server under my local network.
View 9 Replies View RelatedWe have been using Ubuntu Server at our department since several months now. It hosts a website, e-mail and nfs(only intra).
It was set-up as RAID 0 with two 1TB Hard drives but I want to change it to RAID 1 for fault tolerance. Is it possible to change existing RAID level? If yes can someone point me to the proper place?
I tried "mdadm" documentation and level set option is available but no explanation available that whether it is only while creating the array or it can change the level too.
I've run into some problems trying to change the default cgi folder from /var/www/cgi-bin to /var/www/cgi-local (in order to migrate scripts from a much older server to a new one). I have edited httpd.conf to modify the following:
Code:
ScriptAlias /cgi-bin/ "/var/www/cgi-local/"
#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-local">
[Code]...
I have also tried several variations. I left ScriptAlias at the default "/var/www/cgi-bin" and I have tried it with AllowOverride None and without the +ExecCGI after Options. I am getting a 404 error when a form has an action directed at a cgi script that is in cgi-local.
Has anyone been able to successfully change MySQL's default datadir in Fedora? I've tried on two machines now (F7 and F11), but run into the same problem on both. Here is what I did:
1. shutdown MySQL (service mysqld stop)
2. create new mysql directory (e.g. ~/mysql/) and set ownership to mysql:mysql
3. move tables from /var/lib/mysql to the new directory (I've tried moving only one user-created table, and also moving system tables with same result).
4. edit my.cnf and change "datadir" to point to new location
5. start MySQL (service mysqld start)
[Code]...
I currently have Zarafa and I am going to install MythWeb for MythTV.To solve the permission problem for installing amportal (FreePBX), I have to change Apache's user and group to Asterisk instead of this, which I've commented out:User ${APACHE_RUN_USER}Group ${APACHE_RUN_GROUP}Once FreePBX is installed completely, I checked to make sure FreePBX is working and it worked. I used the latest version of Asterisk from the SVN trunk, so I used ./install_amp --my-svn-is-correct.However, I want to use Zarafa AND FreePBX, I just don't like having to change the Apache User and Group to asterisk.Here is a couple of examples of instructions when installing FreePBX:Is there a workaround? I really want to change it back to what it was before while FreePBX can still access their own directories.
I did not know if this question has been asked, but I thought I'd ask here. I've added "zarafa" and "mythweb" to the tags list my thread.Update: I changed my apache configuration file back to www-data for User and Group and I do have /var/lib/asterisk/agi-bin and /var/www/asterisk (where FreePBX PHP pages are installed in /var/www/asterisk) owned by asterisk:asterisk. But I get this:
Code:
Retrieve conf failed to copy file(s) from a module's agi-bin dir: copy(/var/lib/asterisk/agi-bin/directory): failed to open stream: Permission denied
[co0de]...
I run ubuntu 10.10 with apache2 and have 2 virtual hosts set up
here is an example of one of the virtual hosts
<VirtualHost *:80>
ServerName blah.endofinternet.org
ServerAlias blah.endofinternet.org
ServerAdmin davidboychuck@gmail.com
DocumentRoot /var/www/blah
[Code]....
Everything was working perfectly until i changed the internal ip of my router from 192.168.1 to 192.168.192 and now virtual hosting no longer works. As far as I can tell everything is setup correctly. I made no changes to the configuration files. Vhosts just literally stopped working. I've tried clearing dns cache not sure what to do at this point. I have tried to a2dissite and then a2ensite and reload the configurations but it literally just seems like apache is not looking for the vhosts in /etc/apache2/sites-enabled even though my apache2.conf still includes them
#Include the virtual host configurations:
Include sites-enabled/
From the apache error log:
[Sun Apr 03 16:41:50 2011] [error] [client 66.249.72.208] script '/var/www/index.php' not found or unable to stat
[Code].....
It looks like it's just not trying to use the vhost document root because when i go to blah.endofinternet.org it just takes me to the default site.
When I want to change my docroot in /home/Vincent/www or /home/Vincent/www/ it gaves me an.
:Syntax error on line 278 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
I googled it already and they sad that you have to type in:
chcon -R -h -t httpd_sys_content_t /home/Vincent/www << doesn't work so I tried also chcon -R -h -t httpd_sys_content_t /home/Vincent/www/ But nothing seems to work?
is everytime i reboot , my keyboard is reset to USA. im in canada & it pisses me off each time i need to change it also.all my options on EMESENE is the same issue always RESET.it's like if nothing keeps the changes once rebooted.
View 1 Replies View RelatedAt some point in the past my installation of Ubuntu suddenly stopped applying the changes automatically when I made changes in the Appearance Preferences.
I used to find when changing my theme, icons, wallpaper etc. it would change immediately, now it doesn't change at all until I've logged out and back in.
It started happening at some point when I was using Karmic, now after upgrading to Lucid the problem is still there.
In a nutshell: sudoers is not designed to use 127.0.0.1
Old, broken sudoers:
Code:
New, fixed sudoers:
Code:
I recently did a clean install of 11.04 over 10.10. I tried Unity, and wasn't a great fan. When trying to use Ubuntu Classic at login, I get straaaaange visual effects, such as no window title bars. I went into Synaptic and removed Unity and installed GNOME, thinking that GNOME would then run when I chose Ubuntu Classic at login, and after some tweaking, like adding gnome-panel and metacity --replace to the startup applications, it did.
Now here is the problem. When I try to add any effects through CCSM, they don't do anything. Zero. Zilch. Nout. I did get some effects when I first installed Natty, but this was part of the reason why my title bars disappeared - after every effect was applied, I had to restart.
getting my Compiz functioning again?